ABB 7B662 Bedienungsanleitung

ABB 7B662
7.1 · 1
PDF Bedienungsanleitung
 · 8 Seiten
Englisch
BedienungsanleitungABB 7B662
MN907
No. 285B Replaces 285A
LB7012
Instruction Manual For Baldor Grinder--Buffers
1MN907
SAFETY NOTICE:
WARNING statements describe conditions that may lead to personnel injury including potentially fatal injuries if the
machine is not properly used and warnings are not properly followed.
Caution statements describe conditions that may lead to equipment damage.
Electrical shock can cause serious or fatal injury. Only qualied personnel should install, maintain or troubleshoot
this equipment.
WARNING: Do not operate this grinder-buffer until you are sure that you are completely familiar with the safe operation
of the grinder-buffer, all accessories and safety equipment. Improper use can lead to severe injury. This
manual defines proper use of this equipment. Before using this equipment for any other use, please consult
Baldor. Contact Baldor if you do not understand any procedure or operation concerning this grinder-buffer or
this manual.
WARNING: Prevent electrical shock hazard and accidental machine operation. Always disconnect grinder-buffer from
the power source before servicing, changing accessories (such as wheels, tool rest, spark arrestor, etc.) or
before performing maintenance.
WARNING: Avoid accidental starting. Make sure switch is in “OFF” position before connecting to power source.
WARNING: Be sure the system is properly grounded before applying power. Do not apply power before you ensure that
grounds are connected. Electrical shock can cause serious or fatal injury. Follow the National Electrical Code
(NEC) and local codes for the safe installation of this equipment.
WARNING: Always use safety glasses with side shields (or full face shield) when operating grinder. Do not use ordinary
eyeglasses. Also use face or dust mask if cutting operation is dusty.
WARNING: Unsuitable accessories or attachments added to this machine can create hazards. Baldor accessories are
specifically designed to be used with this grinder-buffer. Use accessories or attachments only in the proper
intended manner. Accessories or attachments obtained from another source may cause hazards. Consult the
manufacturer before use.
WARNING: Keep guards in place and in working order. Guards are design to prevent injury. Never operate this equipment
if a guard is damaged, missing or improperly installed.
WARNING: Remove adjusting keys and wrenches from this product after use. Check to see that keys and adjusting
wrenches are removed from grinder-buffer before turning it on. Projectiles can cause severe injury to
yourself or others.
WARNING: Keep work area clean and well lighted. Clutter and poor lighting invites accidents.
WARNING: Don’t use in dangerous environment. Don’t use grinder-buffers in damp or wet locations, or expose them to
rain. Electrical shock can cause serious or fatal injury. Follow the National Electrical Code (NEC) and local
codes for the safe installation of this equipment.
WARNING: Do not wear loose clothing, neckties, rings, bracelets, or other jewelry to get caught in moving parts. Nonslip
footwear is recommended. Wear protective hair covering to contain long hair.
WARNING: Secure work. Use clamps to secure the work piece when practical. It’s safer than using your hand and it
keeps hands away from wheel.
WARNING: Check damaged parts. Before further use, a guard or other part that is damaged should be carefully checked
to assure that it will operate properly and perform its intended function. Check for alignment of moving parts,
binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation.
A guard or other part that is damaged should be properly repaired or replaced.
WARNING: When starting a grinder for the first time, or after installing a replacement grinding wheel, it is most important
that the operator stand aside for at least one minute of rotation at full speed. This is the correct practice
since grinding wheels can disintegrate if they have received damage during shipping or handling.
WARNING: Use proper extension cord. Make sure your extension cord is in good condition. When using an extension
cord, be sure it is rated for the voltage and current rating of your product. An undersized cord will cause a
drop in line voltage resulting in loss of power and overheating. Table 1 shows the correct wire size to use
depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. Thesmaller
theAWGgaugenumber, theheavier the cord.
WARNING: Dust created during grinding, buffing, sawing, power sanding, drilling, and other activities may contain
chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
WARNING: Keep children and visitors away. Remove starter keys turn off master switches. Padlock equipment or work
area when not in use.
WARNING: Don’t over reach. Keep proper footing and balance at all times. A rotating wheel can catch an article of
clothing and cause personnel injury.
WARNING: Never leave grinder-buffer running unattended. Always turn power off after use.
Caution: Don’t force grinder-buffer. It will do the job better and safer at the feed rate for which it was designed.
Caution: Use right tool. Don’t force tool or attachment to do a job for which it was not designed.
Caution: Maintain grinder-buffer with care. Keep grinder-buffer clean for best and safest performance.
Always use guard and eyeshield. Operating the grinder-buffer without the guard and eyeshield or with damaged
guard and eyeshield must not be attempted because of the hazard this introduces.
A damaged grinding wheel can disintegrate in all directions. Do not overtighten wheel nut. An overtightened
wheel nut can stress the grinding wheel and cause it to disintegrate during operation. Wheel nut should be tightened
just enough to prevent grinding wheel from slipping on shaft when grinding. Use only anges furnished with this
grinder-buffer. The anges furnished with the grinder-buffer are designed to grip the grinding wheel and wire
brushwithout introducing excessive stresses.

Bedienungsanleitung

Sehen Sie sich hier kostenlos das Handbuch für ABB 7B662 an. Dieses Handbuch fällt unter die Kategorie Grinders und wurde von 1 Personen mit einem Durchschnitt von 7.1 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum ABB 7B662 oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage

Brauchen Sie Hilfe?

Haben Sie eine Frage zum ABB 7B662 und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere ABB 7B662-Besitzer, Ihnen eine gute Antwort zu geben.

Anzahl der Fragen: 0

ABB 7B662-Spezifikationen

Nachfolgend finden Sie die Produktspezifikationen und die manuellen Spezifikationen zu ABB 7B662.

Allgemeines
Marke ABB
Model 7B662 | 7B662
Produkte Grinder
EAN 0781568127353
Sprache Englisch
Dateityp Benutzerhandbuch (PDF)
Sonstige Funktionen
Typ Trockenschleifmaschine
Gewicht und Abmessungen
Gewicht 13166 g
Paketgewicht 13166 g
Höhe 279.4 mm
Breite 266.7 mm
Tiefe 469.9 mm
Merkmale
Produktfarbe Blau
Gummifüße Ja
Leistungen
Anzahl der Schleifscheiben 2
Schleifraddurchmesser 152 mm
Schleifscheibendicke 19.05 mm
Schleifscheibenbohrung 12.7 mm
Leerlaufdrehzahl (max.) 3600 RPM
Leistung
Kabellänge 2.4 m
AC Eingangsfrequenz 60 Hz
AC Eingangsspannung 115 V
Stromstärke 3.1 A
Lieferumfang
Funkenschutzschild Ja
Mehr anzeigen

Häufig gestellte Fragen

Finden Sie die Antwort auf Ihre Frage nicht im Handbuch? Vielleicht finden Sie die Antwort auf Ihre Frage in den FAQs zu ABB 7B662 unten.

Ist Ihre Frage nicht aufgeführt? Stellen Sie hier Ihre Frage

Keine Ergebnisse