Name: Acroprint 150AR3
Brand: Acroprint
SKU: 288047
Rating: 96 (1 reviews)

BedienungsanleitungAcroprint 150AR3

General Service Instructions

Models 125 and 150 Recorders

To Remove Case Cover

1) Turn key one quarter turn clockwise.

2) Lift case cover up then forward.

3) Reverse procedure to replace cover.

To Set Time and/or Date

NOTE: Unless your recorder is equipped with

continental (0-23) hours, all PM hours on the time

card will be printed underscored (Ex.:

1:00). To

change the time and/or date follow these steps:

1) Unplug recorder and remove Case Cover.

2) To Set Day/Date

A) Make sure current time setting is between

midnight and noon (see note above).

B) Push down and release Yellow Lever (see

Figure 1) to set correct day/date.

C) Plug in recorder and punch card to verify correct

setting. Repeat steps A-C if reading is incorrect

3) To Set Time

A) Push down and release Black Minute Lever

to set the correct time (see Figure 1). If

minute lever does not work, plug in recorder

and wait for minute hand to advance, then

unplug recorder and try lever again. DO NOT

MOVE CLOCK HANDS TO SET THE TIME.

4) To Set Month (if so equipped)

A) Turn Month Knob (see Figure 1) counter-

clockwise to select correct month.

B) Plug in recorder and punch card to verify correct

setting. Repeat steps A-B if reading is incorrect.

5) To Set Year (if so equipped)

A) Insert point of pen into spoke on side of year

wheel and rotate counter-clockwise.

B) Plug in recorder and punch card to verify correct

setting. Repeat steps A-B if reading is incorrect.

IMPORTANT NOTES

1) The date setting (if so equipped) MUST

be manually reset to the first of the

month each month, following any month

with less than 31 days.

2) The month and year settings (if so

equipped) MUST be manually reset

every month/year.

3) To reset your recorder after a power

failure follow the steps 1-5.

4) HINT: If clock is set slightly ahead of actual

time, you may unplug it until it matches the

correct time.

To Set Time and/or Date for Left Print Models

1) Unplug recorder and remove Case Cover.

2) To Set Day/Date

A) Follow the same steps as for standard models,

but note the different location of Yellow Day/Date

lever in Figure 2.

3) To Set Time

A) Follow the same steps as for standard models.

4) To Set Month (if so equipped)

A) Move Month Lever (see Figure 2) to extreme

left position then return slowly to right until an

audible "click" is heard.

B) Plug in recorder and punch card to verify correct

setting. Repeat steps A-B if reading is incorrect.

5) To Set Year (if so equipped)

A) Note that year set lever is located at the rear

of the typehead assembly. Follow the same

steps as for setting the month on left print

models.

Figure 2

(left print models)

Month Lever

RALEIGH, N.C. USA

Black Minute

Lever

Yellow

Day/Date

Lever

Month Knob (turn counter-clockwise)

Figure 1

(cover removed)

RALEIGH, N.C. USA

Black

Minute

Lever

Yellow

Day/Date

Lever

Note: Day/Date & Month levers

are shown in cut-away views.

The levers are behind the clock

dial.

Sehen Sie sich hier kostenlos das Handbuch für Acroprint 150AR3 an. Dieses Handbuch fällt unter die Kategorie uhren und wurde von 1 Personen mit einem Durchschnitt von 9.6 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum Acroprint 150AR3 oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage

Brauchen Sie Hilfe?

Haben Sie eine Frage zum Acroprint und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Acroprint -Besitzer, Ihnen eine gute Antwort zu geben.

Anzahl der Fragen: 0