Azden SGM-2X Bedienungsanleitung

Azden SGM-2X
(2)
  • Anzahl Seiten: 2
  • Dateityp: PDF
Thank you for purchasing the Azden SGM-2X microphone. Designed for Video and Audio
Professionals, the SGM-2X comes with 2 barrels that effectively change the pick-up pattern of
the microphone. With the short barrel the SGM-2X works as a sensitive omni-directional
microphone. By attaching the supplied long barrel the SGM-2X becomes a directional super-
cardioid shotgun microphone. In either configuration the SGM-2X exhibits a wide frequency
response and low noise levels.
BATTERY:
The SGM-2X is powered by 1 AAA battery (not included). Unscrew the lower half of the short
barrel case just below the Power switch by turning it counter-clockwise. Install 1 fresh AAA
Alkaline battery, making sure to check polarity, and close the case by turning it clockwise. DO
NOT OVER-TIGHTEN or you may strip the threads.
MICROPHONE BARRELS:
Two microphone barrels and windscreens are supplied with the SGM-2X. The SHORT barrel
has a wide omni-directional pick-up pattern. By attaching the LONG barrel to the SHORT
barrel the microphone has a super-cardioid pick-up pattern. This narrow or directional pattern
rejects side and back noise and lets you focus in on your subject. In either configuration use
the appropriate windscreen for best results.
NOTE:
A CAPSULE COVER is attached to the SHORT barrel before shipping. This CAPSULE
COVER should be attached to the SHORT barrel when using the SGM-2X as an omni-
directional microphone. To use the SGM-2X as a shotgun microphone, first remove the
CAPSULE COVER from the SHORT barrel by turning it counter-clockwise until it comes off,
then attach the LONG barrel to the SHORT barrel turning it clockwise until tight. DO NOT
OVER-TIGHTEN.
SHOCK-MOUNT HOLDER:
The SGM-2X is supplied with a shock-mount holder. This holder can be used on a camera
shoe or on a microphone stand. Push the SHORT barrel through the center of the elastic
bands until it is positioned as shown. To secure the holder to a camera shoe, slide the holder
into the camera shoe and tighten the thumbwheel by turning it clockwise. To secure the holder
to a microphone stand, screw the holder to the stand by turning it clockwise until it is tight.
NOTE: Two holes are drilled into the bottom of the holder for different diameter microphone
stand threads, choose the one that matches your mic stand.
POWER SWITCH:
The SGM-2X has a 3-position power switch.
OFF: Switch the microphone to OFF when not in use to conserve battery life.
ON: Switch the microphone to ON for normal operation.
: Switch to the LOW CUT position to reduce low frequencies and increase clarity.
MIC OUTPUT:
The SGM-2X has a balanced XLR output and will work in any low impedance microphone
input of 1K ohm or less. This includes balanced XLR or unbalanced ¼" and 3.5mm micro-
phone inputs. Due to the wide variety of possible connections and equipment used with the
SGM-2X, an output cable is not supplied.
WIRELESS OPTIONS:
You can turn the SGM-2X into a wireless microphone by purchasing one of Azdens unique
XLR plug-in transmitters and matching receiver. For more details contact your Azden dealer or
one of the dealers linked at our website: www.azdencorp.com
SPECIFICATIONS:
FREQUENCY RESPONSE 40-20,000Hz
LOW-CUT ROLL-OFF 6dB/Octave @ 200Hz
SENSITIVITY SUPER CARDIOID -39dB re 1V/Pa
OMNI-DIRECTIONAL -45dB re 1V/Pa
IMPEDANCE 680 Ohms @ 1KHz
MAX. SPL INPUT LEVEL 110dB
SIGNAL TO NOISE RATIO 70dB
DYNAMIC RANGE 85dB
BATTERY TYPE AAA (1.5V) - USE ALKALINE BATTERY
BATTERY CURRENT 0.2 mA
BATTERY LIFE 1000 HOURS w/ALKALINE BATTERY
WEIGHT w/o BATTERY LONG + SHORT BARREL 6.5oz (185grams)
SHORT BARREL 3.9oz (110grams)
DIMENSIONS LONG + SHORT BARREL .. 16" (400mm) length
.. 0.83" (21mm) diameter
SHORT BARREL . 8.4" (212.5mm) length
. 0.83" (21mm) diameter
OUTPUT TYPE 3-Pin XLR type
SUPPLIED ACCESSORIES SHOCK MOUNT MIC HOLDER
2 WINDSCREENS

Short Windscreen Long Windscreen

Long Barrel

Short Barrel

Shock Mount Holder

Capsule Cover

+
-
Azden SGM-2X

Brauchen Sie Hilfe?

Anzahl der Fragen: 0

Haben Sie eine Frage zum Azden SGM-2X oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je detaillierter Sie Ihr Problem und Ihre Frage angeben, desto einfacher können andere Azden SGM-2X-Eigentümer Ihre Frage richtig beantworten.

Sehen Sie sich hier kostenlos das Handbuch für Azden SGM-2X an. Dieses Handbuch fällt unter die Kategorie SLR-Kameras und wurde von 2 Personen mit einem Durchschnitt von 8.5 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum Azden SGM-2X oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage

Azden SGM-2X-Spezifikationen

Allgemeines
Marke Azden
Model SGM-2X
Produkte SLR-Kamera
EAN 95528060049
Sprache Englisch
Dateityp PDF
Mikrofon
Mikrofon-Eingangsimpedanz 680 Ohm
Mikrofon-Empfindlichkeit -39 dB
Mikrofon-Frequenz 40 - 20000 Hz
Anschlüsse und Schnittstellen
Übertragungstechnik Verkabelt
Sonstige Funktionen
Abmessungen (BxTxH) 212.5 x 21 x 21 mm
Gewicht 185 g
Leistung
Akku-/Batteriebetriebsdauer 1000 h
Akku-/Batterietyp AAA
Batterietechnologie Alkali
Arbeitsspannung 1.5 V
Mehr anzeigen

Häufig gestellte Fragen

Nachfolgend finden Sie die am häufigsten gestellten Fragen zu Azden SGM-2X .

Ist Ihre Frage nicht aufgeführt? Stellen Sie hier Ihre Frage