B&B Electronics ADAM-4520 Bedienungsanleitung

B&B Electronics ADAM-4520
8.2 · 1
PDF Bedienungsanleitung
 · 6 Seiten
BedienungsanleitungB&B Electronics ADAM-4520
1 ADAM-4510/4510S/4520 Startup Manual

ADAM-4510 RS-422/RS-485 Repeater

ADAM-4510S Isolated RS-422/485 Repeater

ADAM-4520 Isolated RS-422/485 Converter

Startup Manual

Before you begin installing your module, please make
sure that the following materials have been shipped:
If any of these items are missing or damaged, contact
your distributor or sales representative immediately.
For detailed information about the ADAM-4510,
ADAM-4510S or ADAM-420, please refer to the man-
ual on the enclosed CD (in PDF format).
CD:\Manual\ADAM 4000\ADAM-4000.pdf
Note : Acrobat Reader is required to view any PDF file.
Acrobat Reader can be downloaded at: http://
(Acrobat is a trademark of Adobe.)
A software utility and user manual can be found on the
driver CD: CD:\ADAM-4000-5000\ADAM_Utility.exe
CE/FCC Notification
ADAM-4510, ADAM-4510S and ADAM-4520 devel-
oped by Advantech Co., Ltd. has passed the CE and
FCC test for environmental specifications. The test
conditions for passing including the equipment being
operated within an industrial enclosure. Therefore, in
order to protect the ADAM module from being dam-
aged by ESD, we strongly recommend that the use of
CE-compliant industrial enclosure products
Most industrial computer systems come with RS-232
serial ports. Though widely accepted, RS-232 has lim-
ited transmission speed, range and networking capa-
bilities. The RS-422 and RS-485 standards overcome
these limitations by using differential voltage lines for
data and control signals.
ADAM-4520 is a isolated converter for systems origi-
nally equipped with RS-232. It transparently converts
RS-232 signals into isolated RS-422 or RS-485 sig-
nals. You don't need to change your PC's hardware or
your software. The ADAM-4520 lets you easily build
an industrial grade, long distance communication sys-
tem with standard PC hardware.
The ADAM-4510 and ADAM-4510S repeaters simply
amplify, or boost, existing RS-485 signals to enable
them to cover longer distances. They extend the com-
munication distance by 4000 ft (1200 m) or extends
the number of connected nodes by 32.
Intelligent RS-485 Control
The RS-485 standard supports half-duplex communi-
cation. This means that just two wires are needed to
both transmit and receive data. Handshaking signals
(such as RTS, Request To Send) are normally used to
control the direction of the data flow. A special I/O cir-
cuit in ADAM-4510, ADAM-4510S, and ADAM-4520
automatically senses the direction of the data flow and
switches the transmission direction. No handshaking
signals are necessary. So you can build an RS-485
network with just two wires. This RS-485 control is
completely transparent to the user. Software written
for half-duplex RS-232 works without modification.
Isolation (ADAM-4510S/4520 only)
ADAM-4510S and ADAM-4520's Opto-isolators pro-
vide 3000 V
isolation to protect the host computer
from ground loops and destructive voltage spikes on
the RS-485 data lines.
Surge Protection (RS-485 only)
ADAM-4510/4510S and ADAM-4520 offer internal
surge-protection on their data lines. Internal high
speed transient suppressors on each data line protect
the modules from dangerous voltages levels or spikes.
Tough Industrial Design
You can power ADAM-4510, ADAM-4510S and
ADAM-4520 with any unregulated power source
between +10 and +30 V
. Their industrial-grade
plastic shells can be mounted on a DIN-rail, panel or in
a piggybacked stack. You make signal connections
through plug-in screw terminal blocks, guaranteeing
easy installation, maintenance and modification

Packing List Overview

• 1 x ADAM-4510, ADAM-4510S or 4520
• 1 x DIN-rail mounting bracket (attached to module)
• 1 x ADAM-4510/4510S/4520 Startup Manual
• 1 x Panel mounting bracket

Manual and Software

For more information on this and other Advantech
products, please visit our website at:
For technical support and service, please visit our
support website at:
This manual is for ADAM-4510, ADAM-4510S and
Part No. 2003451000 4th Edition
March 2005.

ADAM-4510/4510S/4520 RS-422/485 Repeater/Converter


Sehen Sie sich hier kostenlos das Handbuch für B&B Electronics ADAM-4520 an. Dieses Handbuch fällt unter die Kategorie Nicht kategorisiert und wurde von 1 Personen mit einem Durchschnitt von 8.2 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum B&B Electronics ADAM-4520 oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage

Brauchen Sie Hilfe?

Haben Sie eine Frage zum B&B Electronics ADAM-4520 und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere B&B Electronics ADAM-4520-Besitzer, Ihnen eine gute Antwort zu geben.

Anzahl der Fragen: 0

B&B Electronics ADAM-4520-Spezifikationen

Nachfolgend finden Sie die Produktspezifikationen und die manuellen Spezifikationen zu B&B Electronics ADAM-4520.

Marke B&B Electronics
Model ADAM-4520 | ADAM-4520
Produkte Nicht kategorisiert
Sprache Englisch
Dateityp Benutzerhandbuch (PDF)
Technische Details
Hostschnittstelle RS-232
Ausgangsschnittstelle RS-422/485
Anschluss 1 DB-9
Anschluss 2 Anschlussklemme
Entkopplung 3 kV
Produktfarbe Blau
Baudrate 115.2 Kbit/s
LED-Anzeigen Ja
Unterstützt Windows-Betriebssysteme Ja
Eingangsspannung 10 - 30 V
Energieverbrauch 1200 mA
Betriebstemperatur -10 - 70 °C
Relative Luftfeuchtigkeit in Betrieb 5 - 95 %
Temperaturbereich bei Lagerung -25 - 85 °C
Mehr anzeigen

Häufig gestellte Fragen

Finden Sie die Antwort auf Ihre Frage nicht im Handbuch? Vielleicht finden Sie die Antwort auf Ihre Frage in den FAQs zu B&B Electronics ADAM-4520 unten.

Ist Ihre Frage nicht aufgeführt? Stellen Sie hier Ihre Frage

Keine Ergebnisse