Be Quiet! Shadow Rock 2 Bedienungsanleitung

Installing of the mounting brackets

Attach the two Intel mounting brackets (4) to the underside of

the CPU cooler using the M3x3 screws (11).

Mounting the CPU cooler

First remove the protective foil from the underside of the

cooler. Spread the thermal paste (15) on the surface of the

CPU. The amount supplied is suffi cient for one or two

applications.

Connect the fan to the CPU fan connector on the

motherboard.

Position the cooler so that it is possible to attach the cooler by

screwing together the M3x16 screws (9)

on the rear side of the motherboard into the hexagonal nuts

with sleeve (6) attached to the cooler.

Connect the fan to the CPU fan connector on the

motherboard.

Position the cooler over the CPU.

Place the hexagonal nuts (8) over the spacer nuts (7) and

progressively tighten these in a crosswise manner until fi rm

using the hexagonal wrench (14).

Introduction: Thank you for deciding to purchase a be quiet!

product. The following instructions will guide you through the

installation process. If you do encounter installation problems,

please don't hesitate to contact our customer services by

mailing service@bequiet.com. Please note that be quiet!

cannot accept liability for damage caused by compatibility

problems.

Warranty:

• 3 years manufacturer guarantee for consumers (original

purchase from authorized be quiet! dealers only)

• Guarantee work can only be processed with an included

copy of the purchase receipt from an authorized be quiet!

dealer

• Manipulation and structural changes of any kind as well

as damages through external mechanical forces lead to a

complete voiding of the guarantee

• Our General Warranty Conditions apply, which can be

viewed on bequiet.com

Listan GmbH & Co.KG . Biedenkamp 3a . 21509 Glinde

Germany

For further information contact us via e-mail:

service@bequiet.com

General

We recommend mounting the cooler outside the PC case.

The following parts are needed for this:

1x be quiet! Shadow Rock 2 CPU cooler (1), 2x Intel mounting

brackets (4), 4x spacer nuts (7), 4x hexagonal nuts (8), 4x

M3x3 screws (11), 1x hexagonal open-end wrench (14), 1x

thermal paste (15)

First screw the spacer nuts (7) onto the threads of the LGA

2011(-3) square ILM socket frame. Use the hexagonal wrench

(14) for this.

Installation of the mounting brackets

Attach the two Intel mounting brackets (4) to the underside of

the CPU cooler using the M3x3 screws (11).

Mounting the CPU cooler

First remove the protective foil from the underside of the

cooler. Spread the thermal paste (15) on the surface of the

CPU. The amount supplied is suffi cient for one or two

applications.

General

With preassembled motherboards we recommend installing

the cooler inside the PC case over the motherboard cutout.

The following parts are needed for this:

1x be quiet! Shadow Rock 2 CPU cooler (1), 1x Intel backplate

(2), 2x Intel mounting brackets (4), 4x hexagonal nuts with sleeve

(6), 4x hexagonal nuts (8), 4x M3x16 screws (9), 4x M3x3 screws

(11), 4x C-profi le spacers (12), 1x hexagonal wrench (14), 1x

thermal paste (15)

Affi xing the backplate

Position the Intel backplate (2) on the rear side of the

motherboard. Then insert the M3x16 screws (9) through the

drill holes situated on the rear side of the backplate.

Fasten the backplate on the front side of the motherboard

using the C-profi le spacers (12) by pressing these onto the

notches in the M3x16 screws (9) until they click in.

Assembly of the mounting brackets

Insert the hexagonal nut with sleeve (6) from below through

each Intel mounting bracket (4) and screw together from

above with the hexagonal nuts (8). Use the hexagonal wrench

(14) for this.

We recommend removal of the cooler prior to transportation.

July 2017

Part name Quantity

be quiet! Shadow Rock 2 cooler 1

Intel backplate 1

AMD backplate 1

Intel mounting brackets 2

Short AMD mounting brackets 2

Hexagonal nuts with sleeve 4

Spacer nuts 4

Part name Quantity

Hexagonal nuts 4

M3x16 screws 4

AMD M3x15 screws 4

M3x3 screws 4

C-profi le spacers 4

AMD washers 4

Hexagonal wrench 1

Thermal paste 1