Bogen ASTB4 Bedienungsanleitung

Bogen ASTB4
7 · 1
PDF Bedienungsanleitung
 · 1 Seite
Englisch
BedienungsanleitungBogen ASTB4

Description

The A-Series Terminal Boot is designed to offer added protection against the effects of
weather on wires and connections made to NEAR A-Series speaker model types A2, A6,
and A8. The ASTB4 package contains 4 terminal boots.
Note: The ASTB4 will not fit the NEAR A12 model.

Installation

1. If necessary, trim the tapering boot sleeve to accommodate the size of the wire bundle
to be attached to the speaker (adjust for a snug fit).
2. Slide the narrow end of the boot sleeve over the wires. Crimp any lugs onto the wires
after inserting the wires through the boot sleeve.
3. Secure the wires to the terminals and then slide the terminal boot into place over the
terminals, pressing it firmly against the terminal strip for a secure fit. The boot only fits
properly in one orientation.

Additional Protection

The terminal boot does not provide a water tight seal for the terminal strip. It is only
designed to minimize the direct effects of weather on the wires and connections.
Silicone-based caulks can be used to improve the seal of the boot to the speaker terminal
area. If desired, apply a bead to the base of the boot before pressing it onto the terminal.
Silicone sealents with adhesive properties adhere better than pure silicone products. The
boot sleeve exit can also be sealed, however, be certain to caulk it so that the caulk can
be removed later in case the boot needs to be removed.
Specifications subject to change without notice.
© 2002 Bogen Communications, Inc.
54-2085-01B 1104
50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel. 201-934-8500 • Fax: 201-934-9832
www.bogen.com

Model ASTB4

A-SERIES SPEAKER

TERMINAL BOOT

Note: The A2 speaker model does not allow enough space between the housing and the
bracket for the boot sleeve to pass between them. Therefore, it is important to install
the boot while the speaker is in its approximate final tilt position.

Description

The A-Series Terminal Boot is designed to offer added protection against the effects of
weather on wires and connections made to NEAR A-Series speaker model types A2, A6,
and A8. The ASTB4 package contains 4 terminal boots.
Note: The ASTB4 will not fit the NEAR A12 model.

Installation

1. If necessary, trim the tapering boot sleeve to accommodate the size of the wire bundle
to be attached to the speaker (adjust for a snug fit).
2. Slide the narrow end of the boot sleeve over the wires. Crimp any lugs onto the wires
after inserting the wires through the boot sleeve.
3. Secure the wires to the terminals and then slide the terminal boot into place over the
terminals, pressing it firmly against the terminal strip for a secure fit. The boot only fits
properly in one orientation.

Additional Protection

The terminal boot does not provide a water tight seal for the terminal strip. It is only
designed to minimize the direct effects of weather on the wires and connections.
Silicone-based caulks can be used to improve the seal of the boot to the speaker terminal
area. If desired, apply a bead to the base of the boot before pressing it onto the terminal.
Silicone sealents with adhesive properties adhere better than pure silicone products. The
boot sleeve exit can also be sealed, however, be certain to caulk it so that the caulk can
be removed later in case the boot needs to be removed.
Specifications subject to change without notice.
© 2002 Bogen Communications, Inc.
54-2085-01B 1104
50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel. 201-934-8500 • Fax: 201-934-9832
www.bogen.com

Model ASTB4

A-SERIES SPEAKER

TERMINAL BOOT

Note: The A2 speaker model does not allow enough space between the housing and the
bracket for the boot sleeve to pass between them. Therefore, it is important to install
the boot while the speaker is in its approximate final tilt position.

Bedienungsanleitung

Sehen Sie sich hier kostenlos das Handbuch für Bogen ASTB4 an. Dieses Handbuch fällt unter die Kategorie Nicht kategorisiert und wurde von 1 Personen mit einem Durchschnitt von 7 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum Bogen ASTB4 oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage

Brauchen Sie Hilfe?

Haben Sie eine Frage zum Bogen ASTB4 und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Bogen ASTB4-Besitzer, Ihnen eine gute Antwort zu geben.

Anzahl der Fragen: 0

Bogen ASTB4-Spezifikationen

Nachfolgend finden Sie die Produktspezifikationen und die manuellen Spezifikationen zu Bogen ASTB4.

Allgemeines
Marke Bogen
Model ASTB4
Produkte Nicht kategorisiert
EAN 0765368450040
Sprache Englisch
Dateityp Benutzerhandbuch (PDF)

Häufig gestellte Fragen

Finden Sie die Antwort auf Ihre Frage nicht im Handbuch? Vielleicht finden Sie die Antwort auf Ihre Frage in den FAQs zu Bogen ASTB4 unten.

Ist Ihre Frage nicht aufgeführt? Stellen Sie hier Ihre Frage

Keine Ergebnisse