Name: Bosch Exxcel WVH28360GB
Brand: Bosch
SKU: 130858
Rating: 64 (2 reviews)

BedienungsanleitungBosch Exxcel WVH28360GB

Safety instructions

– The washer dryer is heavy – take care when lifting it.

– Warning: frozen hoses may tear/burst. Do not install the washer dryer outdoors or in areas

where there is a risk of frost.

– The washer dryer may be damaged. Do not lift by moveable components (e.g. washer dryer

door).

– In addition to the instructions mentioned here, special regulations regarding the relevant

water and power supply companies may apply.

– If in doubt, have the appliance connected by a technician.

– Lay hoses and cables in such a way that there is no risk that they can be tripped over.

Environmentally friendly disposal



– Dispose of packaging in an environmentally friendly manner.

– This appliance has been identified in accordance with the European Directive

2002/96/EEC on Waste Electrical and Electronic Equipment (WEEE). This directive

specifies a framework for the return and recycling of waste appliances, and is valid

throughout Europe.

Scope of delivery according to the model

Humidity in the drum is caused

by the final inspection.

Depending on the connection

– A 24–40 mm dia. hose clip may also be required for connecting the siphon (available from

specialist retailers). a Page 4: Water connection

Useful tool

– Spirit level for aligning the washer dryer.

– Wrench for adjusting the machine feet.

Water drainage

Power cord

Water supply

Covers

Hose holder

Aqua-Stop Aqua-Secure Standard

Elbow

for fixing the waste

water hose

Installation area

– Stability is important to prevent the machine from wandering.

– The installation area must be firm and level.

– Soft floors/floor coverings are not suitable.

– Ensure the area is well ventilated to achieve good drying performance.

If installing the appliance on a platform

– It is essential to secure the washer dryer feet with holding brackets *.

If installing the appliance on a wooden joist floor

– If possible, install the washer dryer in a corner.

– Screw a water-resistant wooden panel (min. 30 mm thick) to the floor.

– It is essential to secure the washer dryer feet with holding brackets *.

* order no. WMZ 20490, WZ 20490

Hose and cable lengths

Connection on left side

Connection on right side

Note: If hose holders are used, the hose lengths may be reduced.

Available from dealer/after-sales service:

– Aqua-Stop extension hose **, approx. 2.50 m.

– Longer supply hose, approx. 2.20 m, for standard model.

** order no. WMZ 2380, WZ 10130

Built-under/built-in appliances

Build these appliances under/in before connection to the power supply.

Installed in between kitchen units (built-under or built-in)

– 62 cm cavity width required.

– Install the washer dryer only under a continuous worktop that is connected firmly to the

adjacent cupboards.

~160 cm

~95 cm ~140 cm

~165 cm

~140 cm

~90 cm

max. 100 cm

min. 60 cm

Removing the transport bolts

– Before using the appliance for the first time, always remove and retain

all 4 transport bolts.

– If transporting the appliance at a later date, always re-install the

transport bolts – this prevents damage to the machine. a Page 6

– Retain the screw and sleeve.

1. Take the hoses out of the holder and the elbow.

2. Undo and remove all 4 transport bolts.

3. Take the power cord out of the holders. Remove the sleeves.

4. Insert the covers and lock them in place by pressing on the locking hook. Insert the hose

holders.

5. Fix the hoses in the hose holders.

Water connection



– Risk of electric shock. Do not immerse the Aqua-Stop safety device in water

(contains an electric valve).

– To prevent leakage or water damage, follow the instructions in this chapter.

– Note: operate the washer dryer with cold mains water only.

Do not connect to the mixer tap of a pressureless hot-water heater.

– Do not use a used inlet hose. Only use the inlet hose supplied or one which was

purchased from an authorised specialist dealer.

– If in doubt, have the appliance connected by a technician.

Water supply

Water inlet hose:

Note: Do not bend, crush, modify or cut through the hose (the strength is no longer guaranteed).

Optimum water pressure in the mains: 100-1000 kPa (1-10 bar)

– When the tap is turned on, the water flow is at least 8 l/min.

– If the water pressure is higher, install a pressure reducing valve.

Model: Aqua-Stop

Aqua-Secure

Standard

1. Connect the water supply hose to the tap.

Tighten the plastic screw fittings by hand only.

2. Carefully turn on the tap and check that the

connection points are not leaking.

Note: The screw connection is under water

mains pressure.

Water drainage

Water drainage hose:

Note: Do not kink or stretch.

Height difference between the installation area and outlet: 60–100 cm

Drainage into a sink/bath tub:

Note: Secure the drainage hose to prevent it from slipping out of the sink.

Note: The plug must not be in the plug hole. When the water is being

pumped out of the washer dryer, check that the water drains away quickly

enough. Do not immerse the end of the drainage hose in the water that has

been pumped out. There is a risk that water will be drawn back into the

washer dryer.

Drainage into a siphon:

Note: Secure the connection with a 24-40 mm dia. hose clip (available from

a specialist retailer).

Drainage into a plastic pipe with rubber sleeve:

Note: secure the drainage hose to prevent it from slipping out

of the drain.

3/4

’’

min. 10 mm

max.

0°

max.

0°

3/4

’’

min 10 mm

Manufacturer (see Operating instructions) 9306/ 9000 829281

Alignment

High levels of noise, intense vibrations and “walking” may be due to incorrect alignment.

Alignment will be carried out by customer service or authorised technicians; if you want

to align the machine by yourself please use a spirit level.

Aligning the washer dryer with a spirit level.

1. Undo the lock nut in a clockwise direction using a wrench.

2. Adjust the height by turning the appliance foot.

All four appliance feet must be placed firmly on the floor.

The washer dryer must not be able to wobble.

Check the alignment of the washer dryer with a spirit level and

correct if necessary.

3. Tighten the lock nut against the housing.

Hold the foot in place and ensure that the height is not adjusted.

The lock nuts on all four appliance feet must be screwed tightly against

the housing.

Electrical connection

Connect the washer dryer to an alternating current using a correctly installed earthed socket

only.

The mains voltage and specifications on the washer dryer must match.

a Page 6: Technical specifications

For information about the connected load and required fuse.

a Page 6: Technical specifications

Ensure that:

– the mains plug and socket are compatible,

– the cable cross-section is adequate,

– the earthing system has been installed correctly.

A damaged power cord must be replaced by an electrician only.

Replacement power cords are available from after-sales service.

Do not use multiple plugs/connectors or extension cables.

If a residual current-operated circuit-breaker is used, only use the type which complies with

current regulations.

Mains plug:

– Do not insert into/pull out of the socket with damp hands.

– do not pull the plug out of the socket by pulling on the power cord.

– never pull out the plug while the appliance is in operation.

Sehen Sie sich hier kostenlos das Handbuch für Bosch Exxcel WVH28360GB an. Dieses Handbuch fällt unter die Kategorie waschmaschinen und wurde von 2 Personen mit einem Durchschnitt von 6.4 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum Bosch Exxcel WVH28360GB oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage

Brauchen Sie Hilfe?

Haben Sie eine Frage zum Bosch und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Bosch -Besitzer, Ihnen eine gute Antwort zu geben.

Anzahl der Fragen: 0

Allgemeines

	Bosch
	Exxcel WVH28360GB \| WVH28360GB
	waschmaschine
	4242002752044
	Englisch
	Benutzerhandbuch (PDF)

Design

Ladetyp	Frontlader
Geräteplatzierung	Freistehend
Türanschlag	Links
Trommelvolumen	56 l
Sichtfenster	Ja
Steuerung	Buttons, Rotary
Display-Typ	LED
Eingebautes Display	Ja
Produktfarbe	Weiß
Trommelmaterial	Edelstahl
Wannenmaterial	Kunststoff
Zertifizierung	CE, VDE

Leistungen

Nennkapazität (Waschen & Trocknen)	4 kg
Maximale Schleuderdrehzahl	1400 RPM
Schleuder-Klasse	B
Nennkapazität (Waschen)	7 kg
Zykluszeit Waschen	480 min
	Nein
Aquastop Funktion	-
Startzeitvorwahl	Ja
Einschalteverzögerung (max.)	24 h
Anti-Faltenfunktion	Ja
Anpassbare Rotationsgeschwindigkeit	-
Luftschallemmission (Waschen)	52 dB
Luftschallemission (Schleudern)	71 dB
Schaumkontrollsystem	Ja
Ladungsausgleichsystem	Ja
Luftschallemmission (Trocknen)	57 dB
Waschprogramme	Hand/wool, Mix, Sport, Delicate/silk

Sonstige Funktionen

Waschwirkungsklasse	A
Jährlicher Energieverbrauch Waschen	244 kWh
Jährlicher Wasserverbrauch Waschen	10800 l
Energieeffizienzklasse (alt)	B
Jährlicher Wasserverbrauch (Waschen & Trocknen)	1900 l
Jährlicher Energieverbrauch (Waschen & Trocknen)	1134 kWh

Leistung

Energieverbrauch Reinigung	1.22 kWh
Energieverbrauch Waschen und Trocknen	5.67 kWh
Wasserverbrauch pro Zyklus (Waschen & Trocknen)	95 l
Anschlusswert	2200 W
AC Eingangsspannung	220 - 240 V
AC Eingangsfrequenz	50 Hz
Stromstärke	10 A

Ergonomie

Türöffnungswinkel	165 °
Kabellänge	2.1 m
Alarm	Ja
Kindersicherung	Ja

Gewicht und Abmessungen

Breite	600 mm
Tiefe	590 mm
Höhe	850 mm
Gewicht	81000 g
Türöffnungsdurchmesser	320 mm
Paketgewicht	86000 g

Finden Sie die Antwort auf Ihre Frage nicht im Handbuch? Vielleicht finden Sie die Antwort auf Ihre Frage in den FAQs zu Bosch Exxcel WVH28360GB unten.

Bei welcher Temperatur soll ich meine Wäsche waschen?

Das Waschetikett Ihres Kleidungsstücks zeigt die empfohlene Waschtemperatur.

Muss ich für meine Waschmaschine einen Wasserenthärter/Kalkreiniger verwenden?

Es ist nicht erforderlich, einen Wasserenthärter/Kalkreiniger zu verwenden. Kalk kann verhindert werden, indem nicht zu oft bei hohen Temperaturen gewaschen und die empfohlene Menge Waschmittel pro Waschgang verwendet wird.

Wie verhindere ich eine stinkende Waschmaschine?

Unangenehme Gerüche können verhindert werden, indem gelegentlich bei 60 Grad gewaschen und die empfohlene Menge Waschmittel pro Waschgang verwendet wird.