Boss OC-5 Bedienungsanleitung

Boss OC-5
7.5 · 1
PDF Bedienungsanleitung
 · 1 Seite
BedienungsanleitungBoss OC-5
* 5 1 0 0 0 7 2 3 8 3 - 0 1 *

Owner’s Manual

Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES (supplied on a separate
After reading, keep the document(s) where it will be available for immediate reference.
AC adaptor
(PSA series; sold
Guitar Amp
DC IN jack
In addition to 9-volt battery operation, this unit can also operate on an AC adaptor
(BOSS PSA series; sold separately).
* Use only the specied AC adaptor (PSA series; sold
separately), and connect it to an AC outlet of the correct
* If the AC adaptor is connected while a battery is installed,
the power supply is drawn from the AC adaptor.
CHECK indicator
The indicator lights when an eect is ON.
* The brightness of the CHECK indicator (LED) will dim as the battery
lowers. Replace the battery when the LED is dim or does not light. For
instructions, refer to Changing the Battery.
* The CHECK indicator shows whether the eect is on or o.
-1OCT LEVEL knob
This knob adjusts the volume of the sound that is one octave below the
direct sound.
+1OCT LEVEL knob
This knob adjusts the volume of the sound that is one octave above the
direct sound.
Pedal switch
This switch turns the
eects ON/OFF.
When this screw is loosened, the pedal will open, allowing you to change the battery.
* For instructions on changing the battery, refer to “Changing the Battery.

Panel Descriptions

Precautions When Connecting

• To prevent malfunction and equipment failure, always turn
down the volume, and turn o all the units before making any
• Once everything is properly connected, be sure to follow the
procedure below to turn on their power. If you turn on equipment
in the wrong order, you risk causing malfunction or equipment
When powering
Turn on the power to your
guitar amp last.
When powering
Turn o the power to your
guitar amp rst.
• Before turning the unit on/o, always be sure to turn the volume
down. Even with the volume turned down, you might hear some
sound when switching the unit on/o. However, this is normal and
does not indicate a malfunction.

Use of Battery

• If operating this unit on battery, please use alkaline battery.
• The life of the included battery may be limited as its primary
purpose was for testing during assembly.
• When operating on battery power only, the unit’s indicator will
become dim when battery power gets too low. Replace the
battery as soon as possible.
• If you handle batteries improperly, you risk explosion and uid
leakage. Make sure that you carefully observe all of the items
related to batteries that are listed in “USING THE UNIT SAFELY” and
“IMPORTANT NOTES” (supplied on a separate sheet).

Additional Precautions

• When disposing of the packing carton or cushioning material in
which this unit was packed, you must observe the waste disposal
regulations that apply to your locality.
• Do not use connection cables that contain a built-in resistor.

Changing the Battery

1. Hold down the pedal and loosen the
thumbscrew, then open the pedal upward.
Battery housing
Spring base
Coil spring
bush hole
snap cord
* The pedal can be opened without detaching the
thumbscrew completely.
2. Remove the old battery from the battery
housing, and remove the snap cord
connected to it.
3. Connect the battery snap to the new battery,
and place the battery inside the battery
* Be sure to carefully observe the batterys polarity
(+ versus -).
4. Slip the coil spring onto the spring base on
the back of the pedal, and then close the
* Carefully avoid getting the snap cord caught in the
pedal, coil spring, and battery housing.
5. Finally, hold down the pedal while tightening
the thumbscrew into the guide bush hole.

Main Specications

Nominal Input Level -20 dBu
Input Impedance 1 MΩ
Nominal Output Level -20 dBu
Output Impedance 1 kΩ
Recommended Load
10 kΩ or greater
Power Supply
Alkaline battery (9 V, 6LR61 or 6LF22)
AC adaptor (PSA series: sold separately)
Current Draw
55 mA
* Expected battery life under continuous
Alkaline battery: Approx. 7 hours
These gures will vary depending on
the actual conditions of use.
73 (W) x 129 (D) x 59 (H) mm
2-7/8 (W) x 5-1/8 (D) x 2-3/8 (H) inches
(including battery)
440 g
1 lb
Owners Manual, Leaet (“USING THE
“Information“), Alkaline battery (9 V, 6LR61
or 6LF22)
(sold separately)
AC adaptor (PSA-series)
• 0 dBu = 0.775 Vrms
• This document explains the specications of the product at the
time that the document was issued. For the latest information,
refer to the Roland website.
• Roland and BOSS are either registered trademarks or trademarks
of Roland Corporation in the United States and/or other countries.
© 2020 Roland Corporation
* The INPUT jack also serves as the power switch. Power is
turned on whenever a plug is inserted into the INPUT jack,
and is turned o when the plug is disconnected. When not
using the unit, you should disconnect any cord connected to
the INPUT jack.
* If you’re using this unit together with other eect units,
connect this unit rst in the chain (directly after the guitar).
If guitar sound processed by an eect is input to this unit, it
might not work correctly.
INPUT jack
This jack accepts input signals coming from a guitar (or bass).
This knob adjusts the volume of the direct sound.
This switch selects settings that are suitable for a
guitar or a bass.
-2OCT/RANGE knob
The operation depends on the setting of the VINTAGE/POLY
Switch Explanation
Operates as the -2OCT LEVEL knob. This knob
adjusts the volume of the sound that is two
octaves below the direct sound.
Operates as the RANGE knob. Adjusts the
bandwidth of the -1OCT eect.
As you turn this knob toward the right, the
eect applies to a wider range of frequencies
from low to high. As you turn this knob
toward the left, the eect is limited to the
low-frequency range. If this knob is turned all
the way to the left, the eect applies only to
the lowest note of the chord.
Use this jack to connect to the input
of your guitar amplier or the input of
additional eect unit.
* Output may vary according to the connections.
This switch selects the character of the sound.
Vintage sound that simulates the OC-2.
Play (input) single notes.
Polyphonic mode that supports chordal
Sound that is output
Connect only to
the OUTPUT jack
The direct sound and octave sound
are mixed and output.
Connect to the
and the DIRECT
OUT jack
The octave sound is output from the
OUTPUT jack, and the direct sound is
output from the DIRECT OUT jack.
When the eect is o, the sound is
output only from the DIRECT OUT
For the USA


Compliance Information Statement

Model Name :
Type of Equipment :
Responsible Party :
Address :
Telephone :
Model Name :
Type of Equipment :
Responsible Party :
Address :
Telephone :
Digital Piano
Roland Corporation U.S.
5100 S. Eastern Avenue Los Angeles, CA 90040-2938
(323) 890-3700
Guitar Eects
Roland Corporation U.S.
5100 S. Eastern Avenue Los Angeles, CA 90040-2938
(323) 890-3700

Sehen Sie sich hier kostenlos das Handbuch für Boss OC-5 an. Dieses Handbuch fällt unter die Kategorie nicht kategorisiert und wurde von 1 Personen mit einem Durchschnitt von 7.5 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum Boss OC-5 oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage

Brauchen Sie Hilfe?

Haben Sie eine Frage zum Boss und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Boss -Besitzer, Ihnen eine gute Antwort zu geben.

Anzahl der Fragen: 0

OC-5 | OC-5
nicht kategorisiert
Benutzerhandbuch (PDF)
Beste VerwendungGitarre
Ausgangspegel-20/0 dB
Nominales Input level-20 dB
Synchronisations-Eingangsimpedanz1000000 Ohm
Output Widerstand1000 Ohm
Rutschfeste OberflächeJa
Anschlüsse und Schnittstellen
6,35 mm (1/4-Zoll) Ausgang2
6,35 mm (1/4-Zoll) Eingang1
Gleichstrom-Anschluss (DC)Ja
EnergiequelleAC, Battery
Energieverbrauch55 mA
Anzahl unterstützter Akkus/Batterien1
Akku-/Batteriespannung9 V
Gewicht und Abmessungen
Breite73 mm
Tiefe129 mm
Höhe59 mm
Gewicht440 g
Mehr anzeigen

Finden Sie die Antwort auf Ihre Frage nicht im Handbuch? Vielleicht finden Sie die Antwort auf Ihre Frage in den FAQs zu Boss OC-5 unten.

Ist Ihre Frage nicht aufgeführt? Stellen Sie hier Ihre Frage

Keine Ergebnisse

© Copyright 2023 Alle Rechte vorbehalten.