Name: Bushnell Prime 10x42
Brand: Bushnell
SKU: 1108331
Rating: 84 (4 reviews)

BedienungsanleitungBushnell Prime 10x42

Thank you for purchasing your new Bushnell® Prime™ binoculars.

This manual will help you optimize your viewing experience by explaining how you can adjust the binocular to your eyes,

and how to care for this instrument. Read the instructions carefully before using your binocular.

NEVER LOOK DIRECTLY AT THE SUN WITH YOUR BINOCULAR,

AS IT MAY CAUSE SERIOUS DAMAGE TO YOUR EYES

EYECUP ADJUSTMENT

Your Bushnell Prime binocular is fitted with eyecups (Fig. 1, next page) that provide a comfortable view of the full image

and help to exclude extraneous light. For use without eyeglasses or sunglasses, twist up the eyecups (Fig. 2, next page).

This will place your eyes farther from the binocular’s ocular lenses, at the correct eye relief distance, allowing you to see

the full field of view.

IPD (INTERPUPILLARY DISTANCE) ADJUSTMENT

The spacing between the pupils of your eyes, called “interpupillary distance,” varies from person to person. To match your

binoculars to your IPD or “eye to eye” width:

1. Point them at a white wall or blank area of the sky. Hold the binoculars and view through them as you normally would.

Don’t worry about focus yet.

2. Grasp each side of the binocular firmly. Move the left and right sides closer together or farther apart (Fig. 3, next

page) until you see a single image with no shaded areas.

FOCUS AND DIOPTER ADJUSTMENT

1. First, adjust the eyecups and IPD as described in the previous sections.

2. Using the attached lens cap or your hand, cover the objective lens on the right

side of the binocular.

3. Using the center focus knob, focus on a distant object with fine detail (e.g.,

brick wall, tree branches, etc) until it appears as sharp as possible when viewed

through the left side of the binocular.

4. Uncover the objective lens on the right side, and cover the left objective lens

while continuing to view the same object.

5. Rotate the diopter adjustment ring located directly below the right eyecup (Fig.

4), NOT the center focus knob to bring the object into focus in the right side of

the binocular. Avoid over-turning or forcing the diopter mechanism. If you are

PARTS GUIDE

* under cap (10x25 model is not tripod adaptable)

Ocular Lens A

Center Focus Knob B

Twist-Up Eyecups C

Tripod Adapter Socket* D

Objective Lens E

Diopter Adjustment Ring F

Objective Lens Covers G

Fig. 4 Diopter Adjustment Ring

(10x42 model shown)

ENGLISH

Sehen Sie sich hier kostenlos das Handbuch für Bushnell Prime 10x42 an. Dieses Handbuch fällt unter die Kategorie ferngläser und wurde von 4 Personen mit einem Durchschnitt von 8.4 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Deutsch, Englisch. Haben Sie eine Frage zum Bushnell Prime 10x42 oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage

Brauchen Sie Hilfe?

Haben Sie eine Frage zum Bushnell und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Bushnell -Besitzer, Ihnen eine gute Antwort zu geben.

Anzahl der Fragen: 0