Casio AQW100-1AV

Casio AQW100-1AV Bedienungsanleitung

(1)
  • 1
    Operation Guide 5028
    Digital Time Daylight Saving Time (DST) Setting
    Daylight Saving Time (summer time) advances the digital time setting by one hour
    from Standard Time. Remember that not all countries or even local areas use Daylight
    Saving Time.
    To toggle the Timekeeping Mode digital time between DST and Standard Time
    1. In the Timekeeping Mode, hold down A until the seconds
    start to flash, which indicates the setting screen.
    2. Press C once to display the DST setting screen.
    3. Press D to toggle between Daylight Saving Time (
    ON
    displayed) and Standard Time (
    OF
    displayed).
    4. Press A twice to exit the setting screen.
    The DST indicator appears on the Timekeeping, Moon/
    Tide Data, Alarm, and Hand Setting Mode screens to
    indicate that Daylight Saving Time is turned on. In the
    case of the Moon/Tide Data Mode, the DST indicator
    appears on the tide data screen only.
    Seconds DST Hour Minutes
    Day Month Year
    3. When the setting you want to change is flashing, use B and D to change it as
    described below.
    Timekeeping
    This watch features separate digital and analog
    timekeeping. The procedures for setting the digital time
    and analog time are different.
    The Moon phase indicator shows the current Moon
    phase in accordance with the current date as kept in the
    Timekeeping Mode.
    The tide graph shows tidal movements for the current
    date in accordance with the current time as kept in the
    Timekeeping Mode.
    Important!
    Be sure to configure the current time and date, and your
    Home Site data (data for the site where you use the
    watch) correctly before using the functions of this watch.
    See “Home Site Data” for more information.
    Getting Acquainted
    Congratulations upon your selection of this CASIO watch. To get the most out of your
    purchase, be sure to read this manual carefully and keep it on hand for later reference
    when necessary.
    Warning!
    The longitude, lunitidal interval, Moon phase indicator and tide graph data that
    appear on the display of this watch are not intended for navigation purposes.
    Always use proper instruments and resources to obtain data for navigation
    purposes.
    This watch is not an instrument for calculating low tide and high tide times. The
    tide graph of this watch is intended to provide a reasonable approximation of
    tidal movements only.
    CASIO COMPUTER CO., LTD. assumes no responsibility for any loss, or any
    claims by third parties that may arise through the use of this watch.
    About This Manual
    Button operations are indicated using the letters shown
    in the illustration.
    For the sake of simplicity, the sample displays in this
    manual do not show the analog hands of the watch.
    Each section of this manual provides you with the
    information you need to perform operations in each
    mode. Further details and technical information can be
    found in the “Reference” section.
    MA0804-EA
    Timekeeping
    Mode
    Moon/Tide Data
    Mode
    Stopwatch
    Mode
    Countdown Timer
    Mode
    Alarm
    Mode
    Dual Time
    Mode
    Hand Setting
    Mode
    Press .
    General Guide
    Press C to change from mode to mode.
    In any mode (except when a setting screen is on the display), press B to illuminate
    the face of the watch.
    Tide graph
    Month – Day
    Moon phase
    indicator
    Hour : Minutes
    Seconds
    PM indicator
    Day of
    week
    Digital Time and Date
    Use the Timekeeping Mode to set and view a digital display of the current time and date.
    When setting the digital time, you can also configure settings for summer time
    (Daylight Saving Time or DST).
    To set the digital time and date
    1. In the Timekeeping Mode, hold down A until the
    seconds start to flash, which indicates the setting
    screen.
    2. Press C to move the flashing in the sequence shown
    below to select the other settings.
    Screen
    36
    P
    10:08
    2008
    6
    -
    30
    To do this:
    Reset the seconds to
    00
    Toggle between Daylight Saving Time (
    ON
    ) and
    Standard Time (
    OF
    )
    Change the hour or minutes
    Change the year
    Change the month or day
    Do this:
    Press D.
    Press D.
    Use D (+) and B ().
    4. Press A twice to exit the setting screen.
    The first press of A displays the UTC differential setting screen. Pressing A again
    exits the setting screen.
    Resetting the seconds only (without changing the DST, hour, or minute setting)
    causes the analog minute hand setting to be adjusted automatically.
    See Digital Time Daylight Saving Time (DST) Setting below for details about the
    DST setting.
    The day of the week is displayed automatically in accordance with the date (year,
    month, and day) settings.
    DST indicator
    On/Off status
    Home Site Data
    Moon phase, tide graph data, and Moon/Tide Data Mode data will not be displayed
    properly unless Home Site data (UTC differential, longitude, and lunitidal interval) is
    configured correctly.
    The UTC differential is a value that indicates the time difference between a
    reference point in Greenwich, England and the time zone where a city is located.
    The letters UTC is the abbreviation for Coordinated Universal Time, which is the
    world-wide scientific standard of timekeeping. It is based upon carefully maintained
    atomic (cesium) clocks that keep time accurately to within microseconds. Leap
    seconds are added or subtracted as necessary to keep UTC in sync with the Earths
    rotation.
    The lunitidal interval is the time elapsing between the Moons transit over a meridian
    and the next high tide at that meridian. See Lunitidal Interval for more information.
    This watch displays lunitidal intervals in terms of hours and minutes.
    The Site/Lunitidal Interval Data List at the back of this manual provides UTC
    differential and longitude information around the world.
    The following is the initial factory default Home Site data (Tokyo, Japan) when you
    first purchase the watch, and whenever you have the batteries replaced. Change
    these settings to match the area where you normally use the watch.
    UTC differential (+9.0); Longitude (East 140 degrees); Lunitidal interval (5 hours,
    20 minutes)
    To configure Home Site data
    1. In the Timekeeping Mode, hold down A until the
    seconds start to flash, which indicates the setting
    screen.
    2. Press A again to display the UTC differential setting
    screen.
    3. Press C to move the flashing in the sequence shown
    below to select other settings.
    UTC
    Differential
    Longitude
    Value
    East Longitude/
    West Longitude
    Lunitidal Interval
    Hours
    Lunitidal Interval
    Minutes
    UTC differential
Casio AQW100-1AV

Brauchen Sie Hilfe?

Anzahl der Fragen: 0

Haben Sie eine Frage zum Casio AQW100-1AV oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je detaillierter Sie Ihr Problem und Ihre Frage angeben, desto einfacher können andere Casio AQW100-1AV-Eigentümer Ihre Frage richtig beantworten.

Sehen Sie sich hier kostenlos das Handbuch für Casio AQW100-1AV an. Dieses Handbuch fällt unter die Kategorie Sportuhren und wurde von 1 Personen mit einem Durchschnitt von 8 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Engels. Haben Sie eine Frage zum Casio AQW100-1AV oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage

Casio AQW100-1AV-Spezifikationen

Allgemeines
Marke Casio
Model AQW100-1AV
Produkte Sportuhr
EAN 79767897666
Sprache Engels
Dateityp PDF
Technische Details
Wasserfest Ja
Timer Countdown
Wasserdicht bis Tiefe 200 m
Kalender Ja
Uhrmodus 12 h / 24 h
Stoppuhr Ja
Akkurazität +/-30 Sek/Monat
Uhrzifferblatt-Typ -
Sonstige Funktionen
Abmessungen (BxTxH) 48.2 x 46 x 14.5 mm
Produktfarbe Schwarz
Gewicht und Abmessungen
Gewicht 54 g
Design
Bandmaterial Harz
Leistung
Akku-/Batterietyp SR927W
Anzahl unterstützter Batterien 2

Häufig gestellte Fragen

Nachfolgend finden Sie die am häufigsten gestellten Fragen zu Casio AQW100-1AV .

Ist Ihre Frage nicht aufgeführt? Stellen Sie hier Ihre Frage

Bedienungsanleitu.ng

Auf der Suche nach einer Bedienungsanleitung? Bedienungsanleitu.ng sorgt dafür, dass Sie in Windeseile die Bedienungsanleitung finden, die Sie suchen. In unserer Datenbank befinden sich mehr als 1 Million PDF Bedienungsanleitungen von über 10.000 Marken. Jeden Tag fügen wir die neuesten Bedienungsanleitungen hinzu, damit Sie jederzeit das Produkt finden, das Sie suchen. Es ist ganz einfach: Tippen Sie in der Suchleiste Markenname und Produkttyp ein und Sie können direkt die Bedienungsanleitung Ihrer Wahl gratis online einsehen.

Bedienungsanleitu.ng

© Copyright 2021 Bedienungsanleitu.ng. Alle Rechte vorbehalten.

Diese Website benutzen Cookies. Wenn Sie die Website weiter nutzen, stimmen Sie der Verwendung von Cookies zu.

Erfahren Sie mehr