Casio G-Shock Classic GW-M5610-1ER Bedienungsanleitung

Casio G-Shock Classic GW-M5610-1ER
8.7 · 23
PDF Bedienungsanleitung
 · 6 Seiten
Englisch
BedienungsanleitungCasio G-Shock Classic GW-M5610-1ER

Operation Guide 3159

1
MO1005-EA

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to read this manual carefully.
Keep the watch exposed to bright light
The electricity generated by the solar cell of the watch is
stored by a rechargeable battery. Leaving or using the
watch where it is not exposed to light causes the battery
to run down. Make sure the watch is exposed to light as
much as possible.
When you are not wearing the watch on your wrist,
position the face so it is pointed at a source of bright
light.
You should try to keep the watch outside of your sleeve
as much as possible. Charging is reduced significantly if
the face is covered only partially.
l
l
l
l
l
l
l
l
l
l
l

Bright Light

Solar cell

All

functions

enabled

LEVEL 1

LEVEL 2

LEVEL 3

LEVEL 4

Charge

Rechargeable battery

Bright Light

Electrical

energy

Solar cell

(Converts light to

electrical power.)

Battery charges in the light. Battery discharges in the dark.

The watch continues to operate, even when it is not exposed to light. Leaving the
watch in the dark can cause the battery to run down, which will result in some watch
functions to be disabled. If the battery goes dead, you will have to re-configure watch
settings after recharging. To ensure normal watch operation, be sure to keep it
exposed to light as much as possible.

LEVEL 1

LEVEL 2

LEVEL 3

LEVEL 4

Some or all

functions

disabled

Dis-

charge

The actual level at which some functions are disabled depends on the watch model.
Frequent display illumination can run down the battery quickly and require charging.
The following guidelines give an idea of the charging time required to recover from a
single illumination operation.

Approximately 5 minutes exposure to bright sunlight coming in through a window

Approximately about 8 hours exposure to indoor fluorescent lighting

Be sure to read “Power Supply” for important information you need to know
when exposing the watch to bright light.
If the display of the watch is blank...
If the display of the watch is blank, it means that the watch’s Power Saving function
has turned off the display to conserve power.
See “Power Saving Function” for more information.
Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage
or loss suffered by you or any third party arising through the use of this product or
its malfunction.
About This Manual
Depending on the model of your watch, display text appears either as dark figures
on a light background or light figures on a dark background. All sample displays in
this manual are shown using dark figures on a light background.
Button operations are indicated using the letters shown in the illustration.
Each section of this manual provides you with the information you need to perform
operations in each mode. Further details and technical information can be found in
the “Reference” section.

General Guide

Press C to change from mode to mode.
In any mode (except when a setting screen is on the display), press B to illuminate
the display.
Timekeeping Mode
Press C.
Countdown Timer Mode Stopwatch Mode
Alarm Mode
World Time Mode

Radio-controlled Atomic Timekeeping

This watch receives a time calibration signal and updates its time setting accordingly.
This watch is designed to pick up the time calibration signals transmitted in Germany
(Mainflingen), England (Anthorn), the United States (Fort Collins), China (Shangqiu),
and Japan (Fukushima, Fukuoka/Saga).
Current Time Setting
This watch adjusts its time setting automatically in accordance with a time calibration
signal. You also can perform a manual procedure to set the time and date, when
necessary.
The first thing you should do after purchasing this watch is to specify your
Home City (the city where you normally will use the watch). For more
information, see “To specify your Home City”.
When using the watch outside the areas covered by the time signal transmitters, you
will have to adjust the current time setting manually as required. See “Timekeeping”
for more information about manual time settings.
The U.S. time calibration signal can be picked up by the watch while in North
America. The term “North America” in this manual refers to the area that consists of
Canada, the continental United States, and Mexico.
As of December 2009, China does not use Daylight Saving Time (DST). If China
does go to the Daylight Saving Time system in the future, some functions of this
watch may no longer operate correctly.
Using this watch in a country covered by a time calibration that is different from the
countries it supports may result in incorrect time indication due to local application of
summer time, etc.

To specify your Home City

1. In the Timekeeping Mode, hold down A until the city
code starts to flash, which indicates the setting screen.
2. Press D (east) and B (west) to select the city code
you want to use as your Home City.
LIS, LON : Lisbon, London
MAD, PAR, ROM, BER, STO : Madrid, Paris,
Rome, Berlin, Stockholm
ATH : Athens
MOW : Moscow
HKG, BJS, TPE : Hong Kong, Beijing, Taipei
SEL, TYO : Seoul, Tokyo
HNL : Honolulu
ANC : Anchorage
YVR, LAX: Vancouver, Los Angeles
YEA, DEN
: Edmonton, Denver
MEX, CHI : Mexico City, Chicago
MIA, YTO, NYC: Miami, Toronto, New York
YHZ : Halifax
YYT : St.Johns

PM indicator

l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l

City code

Hour : Minutes

Seconds

3. Press A to exit the setting screen.
Normally, your watch should show the correct time as soon as you select your Home
City code. If it does not, it should adjust automatically after the next auto receive
operation (in the middle of the night). You also can perform manual receive or you
can set the time manually.
The watch will receive the time calibration signal automatically from the applicable
transmitter (in the middle of the night) and update its settings accordingly. For
information about the relationship between city codes and transmitters, see
“Important!” under “Time Calibration Signal Reception” and “Transmitters”.
See the maps under “Approximate Reception Ranges” for information about the
reception ranges of the watch.
You can disable time signal reception, if you want. See “To turn auto receive on and
off” for more information.
Under factory default settings, auto receive is turned off for all of the following city
codes: MOW (Moscow), HNL (Honolulu), and ANC (Anchorage). For details about
turning on auto receive for these city codes, see “To turn auto receive on and off”.
Time Calibration Signal Reception
There are two different methods you can use to receive the time calibration signal:
auto receive and manual receive.
Auto Receive
With auto receive, the watch receives the time calibration signal automatically up to
six times a day (five times a day for the Chinese calibration signal). When any auto
receive is successful, the remaining auto receive operations are not performed. For
more information, see “About Auto Receive”.
Manual Receive
Manual receive lets you start a time calibration receive operation with the press of a
button. For more information, see “To perform manual receive”.
Important!
When getting ready to receive the time calibration signal, position the watch as
shown in the nearby illustration, with its 12 o’clock side pointing towards a window.
This watch is designed to receive a time calibration signal late at night. Because of
this, you should place the watch near a window as shown in the illustration when you
take it off at night. Make sure there are no metal objects nearby.
12 o’clock
or
Make sure the watch is facing the right way.

Bedienungsanleitung

Sehen Sie sich hier kostenlos das Handbuch für Casio G-Shock Classic GW-M5610-1ER an. Dieses Handbuch fällt unter die Kategorie Armbanduhren und wurde von 23 Personen mit einem Durchschnitt von 8.7 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum Casio G-Shock Classic GW-M5610-1ER oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage

Brauchen Sie Hilfe?

Haben Sie eine Frage zum Casio G-Shock Classic GW-M5610-1ER und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Casio G-Shock Classic GW-M5610-1ER-Besitzer, Ihnen eine gute Antwort zu geben.

Martin Kahler • 4-10-2020 1 Kommentar

Meine Casio GW-M5610-1ER zeigt die Uhrzeit im 12 Stunden-Format an. Wie kann ich die Uhr auf das 24 Stunden-Format umstellen? Ich schaffe das bisher nicht und wäre Ihnen für eine Beschreibung dankbar.Gibt es für die Umstellung einen einfachen Weg? Mit freundlichen Grüßen Martin Kahler

Hans Berger • 24-4-2021

Umstellen von 12 auf 24 Std.-Format?

Diese Frage beantworten
Müller • 28-10-2020 Keine Kommentare

Hallo. Seit der Zeitumstellung am 25.10 stellt sich die Uhr über Nacht eine Stunde vor. Berlin ist eingestellt. Nach manuellen zurückstellen am Tag, geht sie am Morgen eine Stunde vor. MfG

Diese Frage beantworten

Anzahl der Fragen: 2

Casio G-Shock Classic GW-M5610-1ER-Spezifikationen

Nachfolgend finden Sie die Produktspezifikationen und die manuellen Spezifikationen zu Casio G-Shock Classic GW-M5610-1ER.

Allgemeines
Marke Casio
Model G-Shock Classic GW-M5610-1ER
Produkte Armbanduhr
EAN 4971850966166
Sprache Englisch
Dateityp Benutzerhandbuch (PDF)
Technische Details
Stoßfest Ja
Radiosignalempfänger EU, US, JP, CH
Weltzeitfunktion Ja
Stoppuhr Ja
Stoppuhrgenauigkeit 0.01 s
Stoppuhrmesskapazität 24 h
Countdown-Funktion Ja
Countdown-Timerbereich 1 - 1440 min
Weckerfunktion Ja
Snooze Funktion Ja
Kalender Ja
Wasserfest Ja
Wasserdicht bis Druck 20 ATM
Mechanismus-Typ Hart Solar
Stoppuhr -
Chronometer -
Uhrzifferblatt-Typ -
Uhrentyp Armbanduhr
Kalender-Typ Tag
Design
Uhrenglas-Typ Mineral
Material des Uhrengehäuses Harz
Bandmaterial Harz
Gehäusefarbe Schwarz
Hauptfarbe Band Schwarz
Hauptfarbe Zifferblatt Schwarz
Produktdesign -
Gehäuseform Rechteckig
Geschlecht Unisex
Leistung
Batteriestandsanzeige Ja
Gewicht und Abmessungen
Breite 43.2 mm
Tiefe 12.7 mm
Höhe 46.7 mm
Gewicht 51.7 g
Mehr anzeigen

Häufig gestellte Fragen

Finden Sie die Antwort auf Ihre Frage nicht im Handbuch? Vielleicht finden Sie die Antwort auf Ihre Frage in den FAQs zu Casio G-Shock Classic GW-M5610-1ER unten.

Ist Ihre Frage nicht aufgeführt? Stellen Sie hier Ihre Frage

Keine Ergebnisse