Casio PRG-240T-7ER

Casio PRG-240T-7ER Bedienungsanleitung

  • 1
    Operation Guide 3173 3246
    Congratulations upon your selection of this CASIO watch.
    The built-in sensors of this watch measure direction, barometric pressure, temperature and altitude.
    Measured values are then shown on the display. Such features make this watch useful when hiking,
    mountain climbing, or when engaging in other such outdoor activities.
    Warning !
    The measurement functions built into this watch are not intended for taking measurements that
    require professional or industrial precision. Values produced by this watch should be considered
    as reasonable representations only.
    When engaging in mountain climbing or other activities in which losing your way can create a
    dangerous or life-threatening situation, always use a second compass to confi rm direction
    Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss
    suffered by you or any third party arising through the use of this product or its malfunction.
    About This Manual
    The operational procedures for Modules 3173 and 3246 are identical. All of the illustrations in this
    manual show Module 3173.
    Depending on the model of your watch, display text appears either as dark fi gures on a light
    background, or light fi gures on a dark background. All sample displays in this manual are shown using
    dark fi gures on a light background.
    Button operations are indicated using the letters shown in the illustration.
    Note that the product illustrations in this manual are intended for reference only, and so the actual
    product may appear somewhat different than depicted by an illustration.
    Things to check before using the watch
    1. Check the battery power level.
    Is “
    ” or “
    ” displayed for the battery power indicator?
    Go to step 2.
    Power is low.
    Charge the watch by placing it in a location
    where it is exposed to light. For details, see “Charging the
    NO YES
    Does any one of the following conditions exist?
    Battery power indicator shows “
    ” and “
    ” is displayed in the
    upper left corner of the screen.
    ” is displayed in the lower left corner of the screen.
    The face is blank.
    The watch is charged
    For details about
    charging, see
    “Charging the Watch”.
    Battery power
    2. Check the Home City and the daylight saving time (DST) setting.
    Use the procedure under “To confi gure Home City settings” to confi gure your Home City and daylight
    saving time settings.
    World Time Mode and Sunrise/Sunset Mode data depend on correct Home City, time, and date settings
    in the Timekeeping Mode. Make sure you confi gure these settings correctly.
    3. Set the current time.
    See “Confi guring Current Time and Date Settings”.
    The watch is now ready for use.
    Charging the Watch
    The face of the watch is a solar cell that generates power from light. The generated power charges a
    built-in rechargeable battery, which powers watch operations. The watch charges whenever it is exposed
    to light.
    Charging Guide
    Whenever you are not wearing the
    watch, leave it in a location where it
    is exposed to light.
    Best charging performance is
    achieved by exposing the watch to
    the strongest light available.
    When wearing the watch, make sure
    that its face is not blocked from light
    by the sleeve of your clothing.
    The watch may enter a sleep state
    if its face is blocked by your sleeve
    even only partially.
    Leaving the watch in bright light for charging can cause it to become quite hot.
    Take care when handling the watch to avoid burn injury. The watch can become particularly hot
    when exposed to the following conditions for long periods.
    On the dashboard of a car parked in direct sunlight
    Too close to an incandescent lamp
    Under direct sunlight
    Allowing the watch to become very hot can cause its liquid crystal display to black out. The
    appearance of the LCD should become normal again when the watch returns to a lower temperature.
    Turn on the watch’s Power Saving function and keep it in an area normally exposed to bright light when
    storing it for long periods. This helps to ensure that power does not run down.
    Storing the watch for long periods in an area where there is no light or wearing it in such a way that it is
    blocked from exposure to light can cause power to run down. Expose the watch to bright light
    whenever possible.
    Module 3173
    Module 3246
    Module 3173
    Module 3246
    Power Levels
    You can get an idea of the watch’s power level by observing the battery power indicator on the display.
    Level Battery Power Indicator Function Status
    All functions enabled.
    All functions enabled.
    Illumination, beeper, and sensor operation
    Except for timekeeping and the
    indicator, all functions and display
    indicators disabled.
    5 All functions disabled.
    The fl ashing
    indicator at Level 3 (
    ) tells you that battery power is very low, and that exposure to
    bright light for charging is required as soon as possible.
    At Level 5, all functions are disabled and settings return to their initial factory defaults. Once the battery
    reaches Level 2 (
    ) after falling to Level 5, reconfi gure the current time, date, and other settings.
    Display indicators reappear as soon as the battery is charged from Level 5 to Level 2 (
    Leaving the watch exposed to direct sunlight or some other very strong light source can cause the
    battery power indicator to show a reading temporarily that is higher than the actual battery level. The
    correct battery level should be indicated after a few minutes.
    All data stored in memory is deleted, and the current time and all other settings return to their initial
    factory defaults whenever battery power drops to Level 5 and when you have the battery replaced.
    Power Recovery Mode
    Performing multiple sensor, illumination, or beeper operations during a short period may cause all of
    the battery power indicators (
    , and
    ) to start fl ashing on the display. This indicates that the watch
    is in the power recovery mode. Illumination, alarm, countdown timer alarm, hourly time signal, and
    sensor operations will be disabled until battery power recovers.
    Battery power will recover in about 15 minutes. At this time, the battery power indicators (
    ) will
    stop fl ashing. This indicates that the functions listed above are enabled again.
    If all of the battery power indicators (
    ) are fl ashing and the
    (charge) indicator also is fl ashing,
    it means the battery level is very low. Expose the watch to bright light as soon as possible.
    Even if battery power is at Level 1 (
    ) or Level 2 (
    ), the Digital Compass Mode, Barometer/
    Thermometer Mode, or Altimeter Mode sensor may be disabled if there is not enough voltage available
    to power it suffi ciently. This is indicated when all of the battery power indicators (
    ) are fl ashing.
    Frequent fl ashing of all of the battery power indicators (
    ) probably means that remaining battery
    power is low. Leave the watch in bright light to allow it to charge.
    Charging Times
    Exposure Level (Brightness)
    Level Change *2
    Level 5 Level 4 Level 3 Level 2 Level 1
    Outdoor sunlight (50,000 lux) 5 min. 2 hours 12 hours 4 hours
    Sunlight through a window (10,000 lux)
    24 min. 5 hours 59 hours 16 hours
    Daylight through a window on a
    cloudy day (5,000 lux)
    48 min. 9 hours 120 hours 32 hours
    Indoor fl uorescent lighting (500 lux) 8 hours 95 hours – – – – – –
    *1 Approximate amount of exposure time required each day to generate enough power for normal daily
    *2 Approximate amount of exposure time (in hours) required to take power from one level to the next.
    The above exposure times all are for reference only. Actual exposure times depend on lighting
    For details about the operating time and daily operating conditions, see the “Power Supply” section of
    the Specifi cations.
    Power Saving
    When turned on, Power Saving enters a sleep state automatically whenever the watch is left for a certain
    period in an area where it is dark. The table below shows how watch functions are affected by Power
    There actually are two sleep state levels: “display sleep” and “function sleep”.
    Elapsed Time in Dark Display Operation
    60 to 70 minutes (display sleep) Blank, with
    ashing Display is off, but all functions are enabled.
    6 or 7 days (function sleep) Blank, with
    not fl ashing
    All functions are disabled, but timekeeping is
    The watch will not enter a sleep state between 6:00 AM and 9:59 PM. If the watch is already in a sleep
    state when 6:00 AM arrives, however, it will remain in the sleep state.
    The watch will not enter a sleep state while it is in the Stopwatch Mode or Countdown Timer Mode.
    To recover from the sleep state
    Move the watch to a well-lit area, press any button, or angle the watch towards your face for reading.
    To turn Power Saving on and off
    1. In the Timekeeping Mode, hold down
    until the currently selected
    city code starts to fl ash. This is the city code setting screen.
    Before the city code starts to fl ash, the message SET Hold
    will appear on the display. Keep
    depressed until SET Hold
    disappears and the city code starts to fl ash.
    2. Use
    to display the Power Saving On/Off screen shown nearby.
    3. Press
    to toggle Power Saving on (
    ) and off (
    4. Press
    twice to exit the setting screen.
    The Power Saving on indicator (PS) is on the display in all modes
    while Power Saving is turned on.
    Battery power
    Battery power
    Power saving
    on indicator
    Power saving
    on indicator
Casio PRG-240T-7ER

Brauchen Sie Hilfe?

Anzahl der Fragen: 0

Haben Sie eine Frage zum Casio PRG-240T-7ER oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je detaillierter Sie Ihr Problem und Ihre Frage angeben, desto einfacher können andere Casio PRG-240T-7ER-Eigentümer Ihre Frage richtig beantworten.

Sehen Sie sich hier kostenlos das Handbuch für Casio PRG-240T-7ER an. Dieses Handbuch fällt unter die Kategorie Armbanduhren und wurde von 2 Personen mit einem Durchschnitt von 8.6 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum Casio PRG-240T-7ER oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage

Casio PRG-240T-7ER-Spezifikationen

Marke Casio
Model PRG-240T-7ER
Produkte Armbanduhr
EAN 4971850924869
Sprache Englisch
Dateityp PDF
Technische Details
Mechanismus-Typ Elektronisch
Uhrzifferblatt-Typ LCD-Zifferblatt
Wasserdicht bis 100
Timer 1/1m - 24h
Akkurazität 15
Uhrmodus 12 h / 24 h
Elektronischer Kompass
Typ Armbanduhr
Vorgeschlagenes Geschlecht -
Gehäusematerial Harz
Gehäusefarbe Titan
Bandmaterial Titan
Uhrenglas-Typ Mineral
Formfaktor Rund
Farbe Ziffernblatt Grau
Markierungstyp Arabischen Ziffern
Design Sport
Armbandfarbe Titan
Akku-/Batterietyp CTL1616
Anzahl unterstützter Batterien 1
Gewicht und Abmessungen
Breite 50.9
Tiefe 15.3
Höhe 57.3
Gewicht 111.4

Verwandte Produkthandbücher

Armbanduhr Casio

Häufig gestellte Fragen

Nachfolgend finden Sie die am häufigsten gestellten Fragen zu CasioPRG-240T-7ER .

Ist Ihre Frage nicht aufgeführt? Stellen Sie hier Ihre Frage

Auf der Suche nach einer Bedienungsanleitung? sorgt dafür, dass Sie in Windeseile die Bedienungsanleitung finden, die Sie suchen. In unserer Datenbank befinden sich mehr als 1 Million PDF Bedienungsanleitungen von über 10.000 Marken. Jeden Tag fügen wir die neuesten Bedienungsanleitungen hinzu, damit Sie jederzeit das Produkt finden, das Sie suchen. Es ist ganz einfach: Tippen Sie in der Suchleiste Markenname und Produkttyp ein und Sie können direkt die Bedienungsanleitung Ihrer Wahl gratis online einsehen.

© Copyright 2020 Alle Rechte vorbehalten.

Diese Website benutzen Cookies. Wenn Sie die Website weiter nutzen, stimmen Sie der Verwendung von Cookies zu.

Erfahren Sie mehr