Celestron Skyris 132C Bedienungsanleitung

Celestron Skyris 132C
6.4 · 1
PDF Bedienungsanleitung
 · 9 Seiten
Englisch
BedienungsanleitungCelestron Skyris 132C
4 5

SOFTWARE INSTALLATION

1. Click Install iCap and follow the prompts to complete installation.
2. Click Install RegiStax and follow the prompts to complete installation.
Skyris will also operate in USB 2.0 at a reduced frame rate.

CONNECTING THE CAMERA

TO A TELESCOPE

3. Click Install Driver. The Driver

Installation Wizard will appear
and prompt you to connect
your camera.

4. Plug the Skyris camera into

the computer’s USB port
using the included cable. If
equipped, use a USB 3.0
port. The Driver Installation
Wizard will automatically
detect your Skyris model.
Click Next and proceed
through the prompts until the
driver installation is complete.

1. Remove the dust cap on

the camera body and thread
the 1.25” nosepiece to the
camera body. The threaded
ring on the camera body
should still be attached.

2. Insert the camera into the

1.25” eyepiece holder on your
telescope. The camera body
can also attach to a camera
adapter with C-threads,
typically requiring the use of a
T-to-C adapter.
1.25” nosepiece
1.25” visual back
Optional T-to-C adapter (not included)

Sehen Sie sich hier kostenlos das Handbuch für Celestron Skyris 132C an. Dieses Handbuch fällt unter die Kategorie Fotokameras und wurde von 1 Personen mit einem Durchschnitt von 6.4 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum Celestron Skyris 132C oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage

Brauchen Sie Hilfe?

Haben Sie eine Frage zum Celestron und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Celestron -Besitzer, Ihnen eine gute Antwort zu geben.

Anzahl der Fragen: 0

Allgemeines
Celestron
Skyris 132C | 95508
Fotokamera
0050234955089
Englisch
Benutzerhandbuch (PDF)
Merkmale
Kamera-Auflösung1280 x 960 Pixel
Sensor-TypAptina AR0132 CMOS
Bildsensorgröße (B x H)4.8 x 3.6 mm
Maximale Framerate200 fps
Expositionsbereich0.0001 - 1 s
Verbindender Thread1 1/4 Zoll
A/D-Conversion12 Bit
Back focus Abstand mit Objektivrevolver19 mm
Back focus Abstand ohne Objektivrevolver17.5 mm
USBJa
KompatibilitätiCap, IC Capture, DirectShow, FireCapture
Betriebsbedingungen
Betriebstemperatur-40 - 40 °C
Lieferumfang
BetriebsanleitungJa
Mitgelieferte KabelUSB
USB Kabellänge3 m
Gewicht und Abmessungen
Gewicht102 g
Mehr anzeigen

Finden Sie die Antwort auf Ihre Frage nicht im Handbuch? Vielleicht finden Sie die Antwort auf Ihre Frage in den FAQs zu Celestron Skyris 132C unten.

Ist Ihre Frage nicht aufgeführt? Stellen Sie hier Ihre Frage

Keine Ergebnisse

Bedienungsanleitu.ng

© Copyright 2023 Bedienungsanleitu.ng. Alle Rechte vorbehalten.