Citizen CAL 8269 Bedienungsanleitung

CITIZEN AUTOMATIC

DAY / DATE

• INSTRUCTION MANUAL

Calibers No. 8200, 8210, 66 69

CTZ-P6911

STARTING THE WATCH

This watch has a high self-winding mechanism that

winds the mainspring with a light motion of your

wrist. However, to obtain best performance, it is

recommended that the crown be wound manually

5 to 10 times at the normal position

0.

If the watch does not start yet, wind the crown 5 to

10 times further or give a shock slightly to the watch.

How to look at the type

Type No. of watch is carved on a back cover as

shown in the chart below.

Setting instruction

In the case of screw lock-type crown, release the

crown screw lock at first.

[Setting The Time]

(1) Pull out crown to position

1 and turn to set hands

to correct time.

• If watch is calendar equipped, pull out crown to

position

2 .

• For calendar-equipped watches, do not confuse

AM or PM settings.

(2) When crown is returned to position

0 , watch will

begin to keep accurate time.

[Setting The Calendar}

(1) Pull out crown to position

1 .

(2) Set date by turning crown to the left.

(3) Set day by turning crown to the right.

• For watches equipped with date display only,

date is set by turning crown to the right.

(4) Return crown to

0

position.

[Setting The Day]

(1) Set the day by performing a reciprocating motion

between 9:00PM and 4:30AM with the crown at

1

position.

[Setting The Date]

(1) The date changes instantly when the crown is

pulled out from position

1

2

. Set to required

date by performing a reciprocation motion

between

1

2

positions.

[Setting The Time]

(1) Pull out crown to position

1

and turn to set hands

to correct time. For calendar-equipped watches,

do not confuse AM and PM settings.

(2) When crown is returned to position

0

, watch will

begin to keep accurate time.

Note:

Avoid performing the calendar quick setting operation

between the below listed times:

For watches equipped with date display

9:00 PM 10:00 AM

For watches equipped with both date and day display

9:00 PM 4:30 AM

If the calendar quick setting operations is performed

between these times the calendar could be incorrectly

set to the date of the previous day.

After setting watch hands during these times, set

time, day and date accordingly.

Special Handling Instruction

1.Water-resistant

Check the chart to determine the water-resistant

properties of this watch.

• Always set the crown in the normal position.

• Do not operate the crown when the watch is wet.

• Tighten screw-lock crown completely. (Screw-

lock type crown)

2.Avoid extreme temperature

3.Avoid strong shocks

4.Avoid strong magnetic fields

5.Avoid chemicals and gases

Avoid wearing your watch in the presence of

chemicals and gases. If mercury or any chemical

(such as fuel gasoline, thinner, alcohol, spray

liquid of cosmetics or the like), attaches,

discoloration, deterioration or damage to case,

band or other components may occur.

6.Keep the watch clean

It may become difficult to pull out the crown due to

dirt and dust getting caught between the crown and

the case when the watch is worn for long periods

of time. To prevent it, turn the crown freely back

and forth occasionally, any dirt left on the case or

band may cause skin rash. Awatchband will easily

become soiled with dust and perspiration because

it is in direct contact with the skin. Even a stainless

steel or gold plated band may begin to corrode if it

has not been cleaned for a long period of time.

7.Periodic inspection

Getting your watch checked once every year or

two is recommended to endure long use and

trouble-free operation.