Code Corporation CodeXML M2 Bedienungsanleitung

Code Corporation CodeXML M2
5.3 · 1
PDF Bedienungsanleitung
 · 2 Seiten
Englisch
BedienungsanleitungCode Corporation CodeXML M2

Quickstart Guide

4 C003345_01_CodeXML_Modem_Quickstart

CodeXML M2 Bluetooth® Modem -

Multiple Interface Unit (MIU)

C003345_01_CodeXML_Modem_Quickstart 1
The CodeXML MIU Modem is an external PC accessory designed to be connected to a computer for use with a Code Reader (CR2 or CR3). The Modem enables a reader to wirelessly transmit captured data to the computer. The Modem can accommodate USB, RS-232 (Serial) and PS/2 cables (Figure 1).
Figure 1
The CodeXML MIU Modem is ‘plug & play.’ You simply plug-in the Modem, scan the QuickConnect code on the Modem Label and start transmitting data from Code Readers without downloading any drivers or software. The Modem can receive Bluetooth signals from up to 300 feet (100 meters) away.
For assistance, contact Code Technical Support at: 801 495 2200; or by email: support@codecorp.com
CodeXML Modem MIU
Modem Firmware Version Output & Values (for reference only):
VVVVvvvvCKP BaudString:
VVVV 4 digit rmware version (MSP430 rmware version)
vvvv 4 digit rmware version (TUSB rmware version)
C 1 digit comm mode: 0=PS/2, 1=Serial, 2=Wand Emul., 3=USB
KBD
K Keyboard Map, same as reader host ICD setting 0x2d
P 1 digit packet protocol: 0=Raw, 1=SPX packet, 2=Code Reader
packet
4=Encrypted Packet Format, 5= Protocol Version (AES)
E Pre-emptible Mode
1=enabled, 0=off/disabled
BaudString spx: Baud:DataBitsParityStopbits
For All Readers:
Scan to View
Firmware Version
The radio contained in the CodeXML M2 Bluetooth® Modem has been tested for compliance
with FCC and CE regulations and was found to be compliant with all applicable FCC Rules and
Regulations.
FCC ID#: QQ6-BTR02
Model #: BTHDG-M2-RO-CX
The radio has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes made by the user not approved by Code Corporation can void the user’s authority
to operate the equipment.
To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation of 20 cm
or more should be maintained between the antenna of this device and persons during device
operation. To ensure compliance, operations at closer than this distance are not recommended.
The antenna used for this transmitter must not be co-located in conjunction with any other
antenna or transmitter.

CodeXML M2 Bluetooth® Modem

Important Note:

US Patent: US 7,240,831, Patents Pending.

Sehen Sie sich hier kostenlos das Handbuch für Code Corporation CodeXML M2 an. Dieses Handbuch fällt unter die Kategorie Netzwerkkarten / Adapter und wurde von 1 Personen mit einem Durchschnitt von 5.3 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum Code Corporation CodeXML M2 oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage

Brauchen Sie Hilfe?

Haben Sie eine Frage zum Code Corporation und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Code Corporation -Besitzer, Ihnen eine gute Antwort zu geben.

Anzahl der Fragen: 0

Allgemeines
Code Corporation
CodeXML M2 | BTHDG-M2-R0-C12
Netzwerkkarte / Adapter
Englisch
Benutzerhandbuch (PDF)
Anschlüsse und Schnittstellen
ÜbertragungstechnikKabellos
SchnittstelleBluetooth
Sonstige Funktionen
Anschluß zu PCJa
Modemgeschwindigkeit115 Kbit/s
Design
EingebautNein
Chipsatz-
AntenneJa
ProduktfarbeSchwarz
Plug & PlayJa
LED-AnzeigenJa
ZertifizierungCE, FCC
Netzwerk
Maximale Datenübertragungsrate1 Mbit/s
Bluetooth-Version2.0+EDR
Netzstandard-
Maximaler Arbeitsabstand10 m
Spread-Spectrum MethodeFHSS
WLAN-BandEinzelband (2,4GHz)
Leistung
Energieverbrauch100 mA
Ausgangsspannung5 V
Systemanforderung
Unterstützt Windows-BetriebssystemeJa
Unterstützt Mac-BetriebssystemeJa
Unterstützte Linux-BetriebssystemeJa
Gewicht und Abmessungen
Breite69.85 mm
Tiefe81.28 mm
Höhe25.4 mm
Nachhaltigkeit
NachhaltigkeitszertifikateRoHS
Betriebsbedingungen
Betriebstemperatur0 - 70 °C
Lieferumfang
Mitgelieferte KabelPS/2
Mehr anzeigen

Finden Sie die Antwort auf Ihre Frage nicht im Handbuch? Vielleicht finden Sie die Antwort auf Ihre Frage in den FAQs zu Code Corporation CodeXML M2 unten.

Ist Ihre Frage nicht aufgeführt? Stellen Sie hier Ihre Frage

Keine Ergebnisse

Bedienungsanleitu.ng

© Copyright 2023 Bedienungsanleitu.ng. Alle Rechte vorbehalten.