Cygnett ChargeUp Digital 4.4K

Cygnett ChargeUp Digital 4.4K Bedienungsanleitung

  • A
    Recharge your ChargeUp Digital
    To recharge your ChargeUp 4,400, connect it to a computer, car-charger or wall charger via the Micro-USB input (D), using the Micro-USB cable provided.
    When charging, the LED 4 light display (B) will flash, indicating remaining charge.
    Charge your device
    Using your device’s USB charging cable (not included), connect your device to the USB output (C). Press the power button (A) once to start charging your
    device. Your device should indicate that it has begun to charge. The LED 4 light display (B) will indicate the power level. When you are finished charging your
    device, detach it from the ChargeUp 4,400. It will turn off automatically.
    LED charge indicator 4 lights – 75-100% 3 lights – 50-75% 2 lights – 25-50% 1 light – 0-25% charge
    Activating the flashlight
    Press and hold the power button (A) for 2 seconds. Press and hold for a further 2 seconds to turn light off.
    ChargeUp Digital 4.4K
    4,400 mAh Portable Powerbank
    Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
    NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
    interference in a residential installation. This equipment generates, uses and radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
    communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
    by turning the equipment off and on, the user is encouraged to try to connect the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation
    between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.
    Important safety instructions
    Please read and follow these instructions carefully and retain for your records.
    Please read all warnings for your safety and optimal user experience.
    1. Never leave a charging battery unattended.
    2. Do not expose the ChargeUp to excess humidity or liquids. It should be stored in a cool, dry place
    when not in use.
    3. Do not damage or puncture the casing of the ChargeUp. This may cause over-heating,fire or
    an explosion.
    4. Do not expose the ChargeUp to sources of heat, including radiators, stoves, or fires. Do not expose to
    ambient temperatures above 40°c, such as in a car on hot day, or in direct sunlight. Failure to do so
    may cause over-heating, fire, or explosion.
    5. Do not use in a strong electrostatic or electromagnetic environment, including near microwaves as this
    may shorten the device’s life.
    6. If ChargeUp emits an odour, excessive heat or becomes discoloured or distorted, please discontinue
    use immediately.
    7. Refer all servicing to qualified service personnel, which is required if ChargeUp is damaged in any way,
    is exposed to liquid or does not operate normally. Please do not attempt to service or open the device.
    This may cause over-heating, fire or an explosion.
    8. If the battery electrolyte makes contact with skin or eyes, rinse thoroughly with water immediately and
    consult a doctor. The electrolyte is flammable and reaction with air may cause the chemicals to ignite,
    resulting in fire.
    9. At the end of the device’s life, please dispose of this product at a battery recycling station. It is not
    suitable for domestic waste disposal.
    10. If a new ChargeUp is not used for a period of three months or more, its battery capacity will be
    reduced, but will restore to normal capacity after 3-4 charges and discharge cycles.
    A - Power button
    B - LED 4 light display
    C - USB output
    D - Micro-USB input
    E - Flashlight
    Product specifications
    Battery type: Lithium-ion Battery
    Input: DC 5V 1A (Max)
    Output: DC 5V 1A (Max)
    LED Battery Indicator
    Battery Capacity 4,400mAh
    Operating Temperature: 0˚C - 40˚C
    Risk of explosion if battery is replaced
    by an incorrect type. Dispose of used
    batteries according to the instructions.
    Do not store cable with both connectors plugged
    into power bank as this may short circuit
    power bank and stop it from working.
Cygnett ChargeUp Digital 4.4K

Brauchen Sie Hilfe?

Anzahl der Fragen: 0

Haben Sie eine Frage zum Cygnett ChargeUp Digital 4.4K oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je detaillierter Sie Ihr Problem und Ihre Frage angeben, desto einfacher können andere Cygnett ChargeUp Digital 4.4K-Eigentümer Ihre Frage richtig beantworten.

Sehen Sie sich hier kostenlos das Handbuch für Cygnett ChargeUp Digital 4.4K an. Dieses Handbuch fällt unter die Kategorie Power Banks und wurde von 1 Personen mit einem Durchschnitt von 6.4 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum Cygnett ChargeUp Digital 4.4K oder benötigen Sie Hilfe?

Diese Website benutzen Cookies. Wenn Sie die Website weiter nutzen, stimmen Sie der Verwendung von Cookies zu.

Erfahren Sie mehr