Dimensions 118.5 x 321 x 104 mm / 4.66 x 12.63 x 4.09 in
Weight about 770 g / 27.16 oz
* Battery must be charged at a temperature ranging from 0° to +45 °C (+32° to +113 °F).
FCC COMPLIANCE
Modifications or changes to this equipment without the expressed written approval of Datalogic could void
the authority to use this equipment.
The device complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference which may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
822000692 (Rev. B)
Kyman-NET™ Vehicle Cradle
The Kyman-NET™ Vehicle Cradle allows charging the Kyman-NET™ mobile computer battery and
holding it securely in your vehicle. It also functions as a serial communication interface between a Host
(typically a Laptop PC) and the RS232 contacts on the mobile computer.
H
D
G
F
C
B
E
A
I
A) Microphone
B) Loudspeaker
C) Ext. Microphone/Headset Jack
D) LED Indicator
E) Mobile Computer Contacts
F) Mounting Holes
G) Adhesive Stylus Holder
H) Power Connector (Jack)
I) RS232 Connector
Figure 1 – Kyman-NET™ Vehicle Cradle
External microphone/headset jack, microphone and speaker allow managing a vocal communication (see
related paragraph on next page).
MOUNTING THE KYMAN-NET™ VEHICLE CRADLE
The Kyman-NET™ Vehicle Cradle can be mounted to the
desired surface using the 4 screws together with the 4 nuts.
Figure 2 – Mounting the Kyman-NET™ Vehicle Cradle
Whatsapp
Mail
Facebook
Brauchen Sie Hilfe?
Anzahl der Fragen: 0
Haben Sie eine Frage zum Datalogic 94A151107 oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je detaillierter Sie Ihr Problem und Ihre Frage angeben, desto einfacher können andere Datalogic 94A151107-Eigentümer Ihre Frage richtig beantworten.
Über die Datalogic 94A151107
Sehen Sie sich hier kostenlos das Handbuch für Datalogic 94A151107 an. Dieses Handbuch fällt unter die Kategorie Handyladegeräte und wurde von 1 Personen mit einem Durchschnitt von 7.5 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Engels. Haben Sie eine Frage zum Datalogic 94A151107 oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage
ACCESSORIES94A051013 WIN-NET VEHICLE POWERCAB (CRADLE)Cable containing an 8A slow-blow fuse for poweringthe vehicle cradle from the car cigarette lighter.94ACC1306 ADJUSTABLE ARM KIT FORVEHICLE CRADLEpositionable arm for mounting the cradle in thevehicle.TECHNICAL FEATURESKyman-NET™ Vehicle CradleElectrical FeaturesPower Supply from 10 to 32 VDCConsumption (with mobile computer) Max. 1.8 AQuiescent Consumption(without mobile computer)Max. 5 mAIndicators Power on LED (green)Charge Time(when mobile computer is off)Li-Ion Battery: max. 2.5 hoursCommunication FeaturesInterface RS232Baud Rate up to 115200 b/secEnvironmental FeaturesWorking Temperature* -20° to +50 °C / -4° to +140 °FStorage Temperature -20° to +70 °C / -4° to +158 °FHumidity 90% non condensingDegree of Protection IP20Vibration Resistance EN60068-2-64 frequency range 5-1000 Hz; accelerationRMS: 3.1 g; initial slope: 26dB/oct 5-10 Hz; final slope: -3dB/oct 10-1000 HzShock Resistance EN60068-2-29 – ±25g, 6ms duration, 500 shock impacts per axisMechanical FeaturesDimensions 118.5 x 321 x 104 mm / 4.66 x 12.63 x 4.09 inWeight about 770 g / 27.16 oz* Battery must be charged at a temperature ranging from 0° to +45 °C (+32° to +113 °F).FCC COMPLIANCEModifications or changes to this equipment without the expressed written approval of Datalogic could voidthe authority to use this equipment.The device complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interferencereceived, including interference which may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class A digital device, pursuantto part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference when the equipment is operated in a commercial environment. This equipment generates,uses, and can radiate radio frequency energy and, if not installed and used in accordance with theinstruction manual, may cause harmful interference to radio communications. Operation of this equipmentin a residential area is likely to cause harmful interference in which case the user will be required tocorrect the interference at his own expense.822000692 (Rev. B)Kyman-NET™ Vehicle CradleThe Kyman-NET™ Vehicle Cradle allows charging the Kyman-NET™ mobile computer battery andholding it securely in your vehicle. It also functions as a serial communication interface between a Host(typically a Laptop PC) and the RS232 contacts on the mobile computer.HDGFCBEAIA) MicrophoneB) LoudspeakerC) Ext. Microphone/Headset JackD) LED IndicatorE) Mobile Computer ContactsF) Mounting HolesG) Adhesive Stylus HolderH) Power Connector (Jack)I) RS232 ConnectorFigure 1 – Kyman-NET™ Vehicle CradleExternal microphone/headset jack, microphone and speaker allow managing a vocal communication (seerelated paragraph on next page).MOUNTING THE KYMAN-NET™ VEHICLE CRADLEThe Kyman-NET™ Vehicle Cradle can be mounted to thedesired surface using the 4 screws together with the 4 nuts.Figure 2 – Mounting the Kyman-NET™ Vehicle Cradle
