Name: Draper Silhouette/Series M
Brand: Draper
SKU: 305223
Rating: 88 (1 reviews)

BedienungsanleitungDraper Silhouette/Series M

Your Draper screen can be mounted on a wall or suspended from the ceil ing,

or mounted on special 6" extension bracket. Extension brackets must be

ordered separately from Draper. With each method of installation, the case

must be mounted level and with the ﬂ at back parallel to the wall.

To reduce the risk of personal injury, use only the hardware which comes

with the screen or is speciﬁ ed in these instructions.

The screen (or extension brackets) should be mounted into studs or block ing

in the wall/ceiling, or in drywall (minimum thickness

") with speciﬁ ed anchors.

For any other type of installation, follow all local build ing and safety codes.

Steel studs, concrete or cinder block walls and all other types of non-wood

frame construction require the use of special screws or anchors. The se-

lec tion of ap pro pri ate mounting hardware should be made by a qualiﬁ ed

pro fes sion al installer.

When locating viewing surface and checking clearance for screen’s op er a tion,

remember surface is centered in case. Handle case carefully to avoid scratch-

ing. Regardless of mounting method, screen should be positively and securely

supported so that vibration or even abusive pulling on the viewing surface

will not cause case to work loose or fall. Installer must insure that fasteners

used are of adequate strength and suitable for the mounting surface.

Wall Mounting

Mount 2, 3, or 4 aluminum brackets provided (“Z” Clips) on the wall at

desired height, using appropriate fasteners. Verify that they are in line and

level to fully engage with the mounting lip on back of screen case. 1

" of

free space is required above the “Z” Clips to allow case lip to be engaged

over the lip of the “Z” Clips.

Engage the lip on back of screen case with lip of “Z” Clip and gently pull

down to fully engage case to brackets.

Ceiling/Suspended Mounting

Locate two offset ceiling brackets (supplied) and slide these into the chan-

nel on top of screen case by aligning the chamfered edges of each bracket

parallel to the channel length. Allow bracket to drop against bottom of

channel and then rotate bracket counter-clockwise. Slide one bracket to

each end of screen case until it stops against end cap of case. Tighten two

set screws to lock bracket in place. Make sure that the ﬂ ange of the ceiling

bracket that has four holes is extended beyond the end caps of the case.

Repeat above procedure for second ceiling bracket, making sure to slide it

towards opposite end of case.

To mount against ceiling, hold screen case against ceiling and mark

mounting hole locations. Each brack et has 2 holes towards the front edge

and 2 holes towards the back edge. Installer must use at least 2 fasteners

per bracket with one fastener in one of the two holes clos est to back edge

of bracket, and one fas ten er in one of the two holes closest to front edge of

bracket. Installer must insure that fasteners are of adequate strength and

suitable for the mounting surface chosen.

To mount suspended from ceiling, the brackets need to be installed on

screen case as noted above. Attach “S” Hooks (supplied) through the holes

in the brackets. Select the set of holes that allows the screen to hang in a

vertical position. The installer is to provide the materials and fasteners to

attach the “S” Hooks to the ceiling. Installer must insure that the fasteners

and suspension material are of adequate strength and suitable for the

mounting surface chosen.

Ceiling bracket in

channel of case

Ceiling bracket

Mounting fasteners

(supplied by others, 2 per bracket)

(front of Silhouette case)

(right end of Silhouette case)

Installation/Operating Instructions

Silhouette/Series M and C

Manually Operated Projection Screens by Draper

Lip on back

of case

"Z" Clip

(wall mounting bracket

supplied with Silhouette)

Silhouette fully engaged

on "Z" Clip

Caution

➀

Read instructions through completely before proceeding; keep

them for future reference. Follow instructions carefully. Installation

con trary to instructions invalidates warranty. Care in both mount-

ing and correct operation willl assure long and sat is fac to ry service

from your Draper screen.

➁

Screen should be accessible for complete removal should fabric

become damaged or for service if required.

➂

Screen should be installed level (using a carpenter’s level).

➃

Nothing should be fastened to screen dowel or viewing surface.

➄

Operating crank for Series C is packed separately in screen car-

ton. Do not discard with packing material.

Note: Screen has been thoroughly inspected and tested at fac-

tory and found to be operating properly prior to shipment.

Installation

If you encounter any difﬁ culties installing or servicing your

screen, call your dealer or Draper, Inc., Spiceland, Indiana, (765)

987-7999, or fax (765) 987-7142.

Sehen Sie sich hier kostenlos das Handbuch für Draper Silhouette/Series M an. Dieses Handbuch fällt unter die Kategorie projektionsleinwände und wurde von 1 Personen mit einem Durchschnitt von 8.8 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum Draper Silhouette/Series M oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage

Brauchen Sie Hilfe?

Haben Sie eine Frage zum Draper und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Draper -Besitzer, Ihnen eine gute Antwort zu geben.

Anzahl der Fragen: 0

Allgemeines

	Draper
	Silhouette/Series M \| 202309
	projektionsleinwand
	641092175254, 0641092170815, 6410921708154
	Englisch
	Benutzerhandbuch (PDF)

Leistungen

Natives Seitenverhältnis	16:9
Einsehbare Bildschirmbreite (B)	1549 mm
Einsehbare Bildschirmhöhe (H)	2311 mm
Gesamte Bildschirmgröße (Höhe x Breite)	124 x 220 cm
Diagonal	100 Zoll
Format	HDTV
Sichtwinkel	60 °
Leuchtdichtefaktor	1
Antriebstyp	Manuell

Gewicht und Abmessungen

Gehäuse L1	2413 mm
Gewicht	18597 g

Design

Befestigungstyp	Wand
Gehäusefarbe	Weiß

Finden Sie die Antwort auf Ihre Frage nicht im Handbuch? Vielleicht finden Sie die Antwort auf Ihre Frage in den FAQs zu Draper Silhouette/Series M unten.

Ist Ihre Frage nicht aufgeführt? Stellen Sie hier Ihre Frage

Keine Ergebnisse