Your telephone equipment is approved for connection to the Public Switched Telephone Network and is incompliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements forTelephone Terminal Equipment published by ACTA.1 Notification to the Local Telephone CompanyOn the bottom of this equipment is a label indicating, among other information, the US numberand Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide thisinformation to your telephone company.The REN is useful in determining the number of devices you may connect to your telephone line andstill have all of these devices ring when your telephone number is called. In most (but not all) areas, the
sum of the RENs of all devices connected to one line should not exceed 5. To be certain of the number of
devices you may connect to your line as determined by the REN, you should contact your local telephonecompany.A plug and jack used to connect this equipment to the premises wiring and telephone network must complywith the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cordand modular plug is provided with this product. It is designed to be connected to a compatible modularjack that is also compliant. See installation instructions for details.Notes• This equipment may not be used on coin service provided by the telephone company.• Party lines are subject to state tariffs, and therefore, you may not be able to use your owntelephone equipment if you are on a party line. Check with your local telephone company.• Notice must be given to the telephone company upon permanent disconnection of your telephonefrom your line.• If your home has specially wired alarm equipment connected to the telephone line, ensure theinstallation of this product does not disable your alarm equipment. If you have questions aboutwhat will disable alarm equipment, consult your telephone company or a qualified installer.2 Rights of the Telephone CompanyShould your equipment cause trouble on your line which may harm the telephone network, the telephonecompany shall, where practicable, notify you that temporary discontinuance of service may be required.Where prior notice is not practicable and the circumstances warrant such action, the telephone companymay temporarily discontinue service immediately. In case of such temporary discontinuance, thetelephone company must: (1) promptly notify you of such temporary discontinuance; (2) afford you theopportunity to correct the situation; and (3) inform you of your right to bring a complaint to the Commissionpursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations.The telephone company may make changes in its communications facilities, equipment, operationsor procedures where such action is required in the operation of its business and not inconsistentwith FCC Rules and Regulations. If these changes are expected to affect the use or performance ofyour telephone equipment, the telephone company must give you adequate notice, in writing, toallow you to maintain uninterrupted service.We bring good things to life.INTERFERENCE INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference; and (2) This device must accept any interference received, including interferencethat may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residentialinstallation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordancewith the instructions, may cause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures:• Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is “receiving” theinterference).• Reorient or relocate and increase the separation between the telecommunications equipment and receivingantenna.• Connect the telecommunications equipment into an outlet on a circuit different from that to which the receivingantenna is connected.If these measures do not eliminate the interference, please consult your dealer or an experienced radio/televisiontechnician for additional suggestions. Also, the Federal Communications Commission has prepared a helpful booklet,“How To Identify and Resolve Radio/TV Interference Problems.” This booklet is available from the U.S. GovernmentPrinting Office, Washington, D.C. 20402. Please specify stock number 004-000-00345-4 when ordering copies.
HEARING AID COMPATIBILITY
This telephone system meets FCC standards for Hearing Aid Compatibility.
BEFORE YOU BEGIN
Make sure your package includes the following items:
MODULAR JACK REQUIREMENTS
To properly connect your phone to your telephone lines, you should identifythe type of wall jack(s) you have. You will need an RJ11C (for a single line) ora RJ14C (for two lines) type modular phone jack, which might look like theone pictured here. If you don’t have either modular jack, call your localphone company to find out how to get one installed.CAUTION: When using telephone equipment, there are basic safetyinstructions that should always be followed. Refer to the IMPOR-TANT SAFETY INSTRUCTIONS provided with this product andsave them for future reference.
Base HandsetHandset cordTwo 4-wire telephoneline cords2. Connect the other end of the straight white telephone line cord to a dual-line wall jack.NOTE: If you connect the telephone line cord to a single-line (RJ11C) wallphone jack, you will only be able to use one telephone line (either LINE 1 orLINE 2) but not both lines simultaneously.3. Connect one end of the coiled handset cord to the jack on the side of the base andconnect the other end to the jack at the bottom of the handset, then place thehandset in the cradle.4. Set the RINGER 1 and RINGER 2 volume switches to the desired listening level ( HI,LO or OFF).NOTE: When in OFF position that line will not ring. Your telephone hasseparate and distinct ringer sounds for each line this will allow you todetermine (audibly) the line of an incoming call.5. Set the mode switch to TONE. If you have problems dialing switch to PULSE.Connecting Lines 1+2 to Two Single-Line Wall Jacks1. Plug one end of a straight white telephone line to the jack marked LINE 1+2 on theback of the base.2. Plug one end of the other straight white telephone line to the jack marked LINE 2 onthe back of the base.3. Connect the other end of each straight white telephone line cord to the two singleline wall phone jacks.4. Connect one end of the coiled handset cord to the jack on the side of the base andconnect the other end to the jack at the bottom of the handset, then place thehandset in the cradle.5. Set the RINGER 1 and RINGER 2 volume switches to HI, LO, or OFF.6. Set the dialing mode switch to TONE. If you have problems dialing, switch toPULSE.
WALL MOUNT INSTALLATION
Your telephone can also be mounted on a wall plate (not included).Connecting Lines 1+2 to One Dual-Line Phone Jack1. Connect one end of either straight telephone line cord to the jack marked LINE 1+2on the back of the base.2. Connect the other end of the straight white telephone line cord to a dual-line walljack.NOTE: If you connect the telephone line cord to a single-line (RJ11C) wallphone jack, you will only be able to use one telephone line (either LINE 1 orLINE 2) but not both lines simultaneously.3. Slip the mounting holes on the base over the wall plate posts and firmly slide theunit down into place (wall plate not included).4. Connect one end of the coiled handset cord to the jack on the side of the base andconnect the other end to the jack at the bottom of the handset, then place thehandset in the cradle.5. Set the RINGER 1 and RINGER 2 volume switches to the desired listening level ( HI,LO or OFF).NOTE: When in OFF position that line will not ring. Your telephone hasseparate and distinct ringer sounds for each line this will allow you todetermine (audibly) the line of an incoming call.6. Set the dialing mode switch to TONE. If you have problems dialing switch to PULSE.Connecting Lines 1+2 to Two Single-Line Wall Jacks1. Plug one end of a straight white telephone line to the jack marked LINE 1+2 on theback of the base.2. Plug one end of the other straight white telephone line to the jack marked LINE 2 onthe back of the base.3. Connect the other end of each straight white telephone line cord to the two singleline wall phone jacks.4. Slip the mounting holes on the base over the wall plate posts and firmly slide theunit down into place (wall plate not included).5. Connect one end of the coiled handset cord to the jack on the side of the base andconnect the other end to the jack at the bottom of the handset, then place thehandset in the cradle.6. Set the RINGER 1 and RINGER 2 volume switches to the desired listening level (HI,LO, or OFF).7. Set the dialing mode switch to TONE. If you have problems dialing, switch toPULSE.
WRAPPINGTHE TELEPHONE LINE CORD
In desktop or wallmount mode, you may want to wrap the excess telephone line cordaround the mounting bracket on the bottom of the base.NOTE: For best results, use a short line cord (not included), which can bepurchased at most electronics specialty stores or department stores.
MAKINGAND RECEIVING CALLS
CHOOSEALINEPress LINE 1 or LINE 2.NOTE: You can use the telephone if you have only one incoming line.However you cannot access a second line.
Use REDIAL, to quickly redial the last number that was manually dialed. This is usefulwhen a line is busy for a long time.1. Pick up the handset.2. Wait for dial tone.3. Press the REDIAL button. The phone automatically redials the last number that wasdialed (up to 32 digits).
Press the FLASH button to activate custom calling services such as call waiting or calltransfer, which are provided by your local phone company. Do not use the hook switchbecause you might hang up the phone.
Press HOLD button and hang up the handset. The LINE indicator lights to indicate theparty is on hold.
At this phone From another phone
1. Pick up handset. 1. Pick up handset.2. Press LINE on hold.
The conference feature enables you to carry on three-way conversation using LINES 1and 2 simultaneously.1. Place first party on HOLD.2. Press the alternate LINE.3. Dial phone number for second party.4. Press CONF and talk to both parties.5. When finished with conference press LINE 1 or 2 to talk privately and disconnectother line.6. When finished hang up.
The volume controls for the handset and line ringers are separate on this phone so youcan adjust one without affecting the others.To adjust the handset volume, use the VOL
switch on the left side of the phone.To adjust RINGER 1 and RINGER 2 volumes, use the switches on the left side of thebase unit . To select volume for RINGER use
OFF. Note that, if in the OFFposition, that line will not ring. Your telephone has separate and distinct ringer soundsfor each line allowing you to determine (audibly) the line of an incoming call.
TEMPORARY TONE FEATURE
If you have Pulse (rotary) service, and want to access customer calling services thatrequire tone dialing, such as getting information from a local bank, you can use this feature.1. Press the TONE BUTTON (*) after you have connected to the service to enable Tone dialing.2. When you hang up, the phone automatically returns to Pulse dialing mode.
To Make a Call To Receive a Call
1.Pick up the handset.1.Press the line number of the flashing
2.Press LINE 1 or LINE 2.indicator.
3. Replace the handset to hang up.2.Pick up the handset.3.Replace the handset to hang up.
Store as many as 10 numbers in memory for easy dialing. Each of the memory buttonsis capable of storing phone numbers that are up to 16 digits.
STORINGA NUMBERIN MEMORY
1. Pick up the handset.2. Select line 1 or 2, and wait for a dial tone.3. Press STORE button.4. Enter the telephone number to be stored.5. Press STORE button.6. Press the desired memory location button (0-9 on the keypad).7. Replace the handset.8. To store another number repeat steps 1-7.
INSERTINGA PAUSEINTHE DIALING SEQUENCE
Press the REDIAL button to insert a delay in the dialing sequence of a stored telephonenumber when a pause is needed to wait for a dial tone (for example after you dial 9 for anoutside line, or to wait for a computer access tone). Each pause counts as 1 digit in thedialing sequence.
CHANGINGA STORED NUMBER
To change a stored number, you just replace it with a different number using theprocedure for storing a number.
DIALINGA STORED NUMBER
1. Pick up the handset.2. Press the line you want (line 1 or line 2).3. Wait for a dial tone.4. Press MEM DIAL button.5. Press memory address button 1-9.NOTE: If you make a mistake while storing a number, hang up and repeatthe storing procedure.
GENERAL PRODUCT CARE
To keep your Telephone working and looking good, follow these guidelines:• Avoid putting it near heating appliances and devices that generate electrical noise(for example, motors or fluorescent lamps).• DO NOT expose to direct sunlight or moisture.• Avoid dropping the unit and/or other rough treatment.• Clean with a soft cloth.• Never use a strong cleaning agent or abrasive powder because this will damagethe finish.• Retain the original packaging in case you need to ship it at a later date.
This product may be serviced only by the manufacturer or its authorized serviceagents. Changes or modifications not expressly approved by ATLINKS USA, Inc. couldvoid the user’s authority to operate this product. For instructions on how to obtain
service, refer to the warranty included in this guide or call customer service at1-800-
448-0329.Or refer inquiries to:ATLINKS USA, Inc.Manager, Consumer RelationsP O Box 1976Indianapolis, IN 46206Attach your sales receipt to the booklet for future reference or jot down the date thisproduct was purchased or received as a gift. This information will be valuable ifservice should be required during the warranty period.Purchase date ________________________________________________Name of store ________________________________________________
No dial tone.•Check hook switch to make sure it pops up.•Check if a LINE button depressed.
Phone dials in pulse with tone service•Make sure TONE/PULSE switch is set to TONE
Phone won’t dial out with pulse service•Make sure TONE/PULSE switch is set to PULSE
Phone doesn’t ring•Check RINGER VOLUME.•You might have too many phones on one line.Can’t be heard by•Make sure phone line is connected properly.other party•Make sure other phones are not OFF hook at thesame time. If so, this is normal condition as volumedrops when additional phones are used at once.Memory dialing•Make sure you entered numbers correctly. (See“Memory.”)Indicator lights do not•Check all of the phones on this line.
Turn on or off properly•Switch the line cord jacks for lines 1 and 2.
While dialing with Tone Service, the •Check the Tone/Pulse switch. If in PULSEphone makes clicking sounds and lineposition, set to TONE, then hang up andindicators (lights) flicker on and off.dial again.
Both line buttons are down and both•Press Line 1 or Line 2 to select the line you
lines are active (a dial tone canwant to use. The other line button releases.be heard).
What your warranty covers:• Defects in materials or workmanship.For how long after your purchase:• One year, from date of purchase.(The warranty period for rental units begins with the first rental or 45 days from dateof shipment to the rental firm, whichever comes first.)What we will do:• Provide you with a new or, at our option, a refurbished unit. The exchange unit is underwarranty for the remainder of the original product’s warranty period.How you get service:• Properly pack your unit. Include any cables, etc., which were originally providedwith the product.• ”Proof of purchase in the form of a bill of sale or receipted invoice which is evidencethat the product is within the warranty period, must be presented to obtain warrantyservice.” For rental firms, proof of first rental is also required. Also print your name andaddress and a description of the defect. Send via standard UPS or its equivalent to:
ATLINKS USA, Inc.
11721 B Alameda Ave.
Socorro, Texas 79927
• Pay any charges billed to you by the Exchange Center for service not covered by thewarranty.• Insure your shipment for loss or damage. ATLINKS accepts no liability in case ofdamage or loss.• A new or refurbished unit will be shipped to you freight prepaid.What your warranty
cover:• Customer instruction. (Your Owner’s Manual provides information regardingoperating instructions and user controls. Any additional information, should beobtained from your dealer.)• Installation and setup service adjustments.• Batteries.• Damage from misuse or neglect.• Products which have been modified or incorporated into other products.• Products purchased or serviced outside the USA.• Acts of nature, such as but not limited to lightning damage.Limitation of Warranty:• THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THISPRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALLIMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULARPURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATIONGIVEN BY ATLINKS USA, INC., ITS AGENTS, OR EMPLOYEES SHALL CREATE AGUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.• REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVEREMEDY OF THE CONSUMER. ATLINKS USA, INC. SHALL NOT BE LIABLE FORINCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THISPRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIEDWARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITEDWARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF INDIANA. EXCEPT TOTHE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OFMERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT ISLIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.How state law relates to this warranty:• Some states do not allow the exclusion nor limitation of incidental or consequentialdamages, or limitations on how long an implied warranty lasts so the abovelimitations or exclusions may not apply to you.• This warranty gives you specific legal rights, and you also may have other rightsthat vary from state to state.If you purchased your product outside the USA:• This warranty does not apply. Contact your dealer for warranty information.
Sehen Sie sich hier kostenlos das Handbuch für GE 29480 an. Dieses Handbuch fällt unter die Kategorie telefone und wurde von 1 Personen mit einem Durchschnitt von 8.6 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum GE 29480 oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage
Brauchen Sie Hilfe?
Haben Sie eine Frage zum GE und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere GE -Besitzer, Ihnen eine gute Antwort zu geben.
Anzahl der Fragen: 0