Hitachi SV12SH Bedienungsanleitung

Hitachi SV12SH
9.9 · 1
PDF Bedienungsanleitung
 · 8 Seiten
BedienungsanleitungHitachi SV12SH


Read all instructions

Failure to follow all instructions listed below may result in

electric shock, fire and/or serious injury.

The term “power tool” in all of the warnings listed below

refers to your mains operated (corded) power tool or battery

operated (cordless) power tool.

1) Work area
a) Keep work area clean and well lit.

Cluttered and dark areas invite accidents.

b) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust.

Power tools create sparks which may ignite the

dust of fumes.

c) Keep children and bystanders away while operating
a power tool.

Distractions can cause you to lose control.

2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.

Unmodified plugs and matching outlets will reduce

risk of electric shock.

b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and

There is an increased risk of electric shock if your

body is earthed or grounded.

c) Do not expose power tools to rain or wet

Water entering a power tool will increase the risk

of electric shock.

d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.

Damaged or entangled cords increase the risk of

electric shock.

e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces

the risk of electric shock.

f) Recommendation for the use of residual current
device with a rated residual current of 30mA
or less.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication.

A moment of inattention while operating power

tools may result in serious personal injury.

b) Use safety equipment. Always wear eye protection.

Safety equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection used

for appropriate conditions will reduce personal


c) Avoid accidental starting. Ensure the switch is in
the off position before plugging in.

Carrying power tools with your finger on the

switch or plugging in power tools that have the

switch on invites accidents.

d) Remove any adjusting key or wrench before
turning the power tool on.

A wrench or a key left attached to a rotating part

of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance
at all times.

This enables better control of the power tool in

unexpected situations.

f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts.

Loose clothes, jewellery or long hair can be caught

in moving parts.

g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used.

Use of these devices can reduce dust related hazards.

4) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application.

The correct power tool will do the job better and

safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not
turn it on and off.

Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

c) Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools.

Such preventive safety measures reduce the risk

of starting the power tool accidentally.

d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool.

Power tools are dangerous in the hands of

untrained users.

e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tools’ operation.
If damaged, have the power tool repaired before

Many accidents are caused by poorly maintained

power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to


g) Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed.

Use of the power tool for operations different from

intended could result in a hazardous situation.

5) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.

This will ensure that the safety of the power tool

is maintained.

01Eng_SV12SH_Eng 5/13/09, 19:421


Sehen Sie sich hier kostenlos das Handbuch für Hitachi SV12SH an. Dieses Handbuch fällt unter die Kategorie Schleifmaschinen und wurde von 1 Personen mit einem Durchschnitt von 9.9 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum Hitachi SV12SH oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage

Brauchen Sie Hilfe?

Haben Sie eine Frage zum Hitachi SV12SH und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Hitachi SV12SH-Besitzer, Ihnen eine gute Antwort zu geben.

Anzahl der Fragen: 0

Hitachi SV12SH-Spezifikationen

Nachfolgend finden Sie die Produktspezifikationen und die manuellen Spezifikationen zu Hitachi SV12SH.

Marke Hitachi
Model SV12SH | 93134446
Produkte Schleifmaschine
EAN 4966376128280
Sprache Englisch
Dateityp Benutzerhandbuch (PDF)
Gewicht und Abmessungen
Gewicht 1000 g
Größe der Schleifplatte (BxT) 110 x 190 mm
Höhe 133 mm
Breite 110 mm
Schleifmachine Sorte Schwingschleifer
Weicher Haltegriff Ja
Entstaubungsanschluss Ja
Schleifen der Medienbefestigung Velcro
Produktfarbe Black,Green
Leerlaufdrehzahl (max.) 14000 RPM
Leerlauf-Oszillationsrate (max.) 28000 OPM
Schwingkreisdurchmesser 1.5 mm
Exzentrizität 0.75 mm
Schallleistungspegel 82 dB
Sonstige Funktionen
Länge (max.) 230 mm
Staubbehälter Typ Staubbeutel
Staubbeutel enthalten Ja
Sandpapier enthalten Ja
Eingangsleistung 200 W
AC Eingangsspannung 230 V
Energiequelle AC
Technische Details
Gewicht 1000 g
Weicher Haltegriff Ja
Formfaktor Handschleifer
Schallleistungspegel 82 dB
Produktfarbe Black,Green
Eingangsleistung 200 W
AC Eingangsspannung 230 V
Höhe 133 mm
Breite 110 mm
Mehr anzeigen

Häufig gestellte Fragen

Finden Sie die Antwort auf Ihre Frage nicht im Handbuch? Vielleicht finden Sie die Antwort auf Ihre Frage in den FAQs zu Hitachi SV12SH unten.

Ist Ihre Frage nicht aufgeführt? Stellen Sie hier Ihre Frage

Keine Ergebnisse