! Before operating your new appliance, please read these
operating instructions carefully. They contain important
information for safe use, installation and care of the
appliance.
! Please keep these operating instructions for future
reference. Pass them on to possible new owners of the
appliance.
Positioning and connection
Positioning
1.Place the appliance in a well-ventilated humidity-free
room.
2.Do not obstruct the rear fan grills. The compressor and
condenser give off heat and require good ventilation to
operate correctly and save energy.
3.Ensure the appliance is far away from any sources of
heat (direct sunlight, electric stove, etc.).
Electrical connections
After transportation of the appliance, carefully place it
vertically and wait at least 3 hours before connecting it to
the electricity mains. Before inserting the plug into the
electrical socket ensure the following:
The appliance is earthed and the plug is compliant with
the law.
The socket can withstand the maximum power of the
appliance, which is indicated on the data plate located
on the bottom left side of the fridge (e.g. 150 W).
The voltage must be in the range between the values
indicated on the data plate located on the bottom left
side (e.g. 220-240V).
The socket is compatible with the plug of the appliance.
If the socket is incompatible with the plug, ask an
authorised technician to replace it (see Assistance). Do
not use extension cords or multiple sockets.
! Once the appliance has been installed, the power supply
cable and the electrical socket must be easily accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced by
authorised technicians only (see Assistance).
! The manufacturer declines any liability should these
safety measures not be observed.
Your appliance is supplied with a 13amp fused plug that
can be plugged into a 13amp socket for immediate use.
Before using the appliance please read the instructions
below.
WARNING:
THIS APPLIANCE MUST BE EARTHED.
Replacing fuse covers:
When replacing a faulty fuse, a 13amp ASTA approved
fuse to BS 1362 should always be used and the fuse
cover re-fitted.
If the fuse cover is lost, the plug must not be used until a
replacement is obtained.
Replacement fuse covers:
If a replacement fuse cover is fitted, it must be of the
correct colour as indicated by the coloured marking or the
colour that is embossed in words on the base of the plug.
Changing the plug:
Removing the plug
If your appliance has a non-rewireable moulded plug and
you should wish to remove it to add a longer cable or to
re-route the mains cable through partitions, units etc.
please ensure that either:
-The plug is replaced by a fused 13amp re-
wireable plug bearing the BSI mark of
approval.
or
-The mains cable is wired directly into a
13amp cable outlet, controlled by a
switch (in compliance with BS 5733)
which is accessible without moving the
appliance.
Disposing of the plug
Cut off and dispose of the supplied plug if it does not fit
your socket. The cable should be cut as close as possible
to the moulded plug.
Remove the fuse.
WARNING:
To avoid a shock hazard do not insert the discarded
plug into a socket anywhere else.
Sehen Sie sich hier kostenlos das Handbuch für Hotpoint HM315FF an. Dieses Handbuch fällt unter die Kategorie kühlschränke und wurde von 1 Personen mit einem Durchschnitt von 7 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum Hotpoint HM315FF oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage
Brauchen Sie Hilfe?
Haben Sie eine Frage zum Hotpoint und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Hotpoint -Besitzer, Ihnen eine gute Antwort zu geben.
Finden Sie die Antwort auf Ihre Frage nicht im Handbuch? Vielleicht finden Sie die Antwort auf Ihre Frage in den FAQs zu Hotpoint HM315FF unten.
Wie verhindere ich Tropfen auf den Glasplatten meines Kühlschranks?
Dafür kann es mehrere Gründe geben. Es ist ratsam, Folgendes zu überprüfen: - Ist das Abflussloch frei von Schmutz? - Schließt die Kühlschranktür richtig? - Ist der Kühlschrank nicht zu voll, damit die Luft richtig zirkulieren kann? - Ist die Temperatur nicht unter 5 Grad eingestellt?
Was kann ich gegen einen stinkenden Kühlschrank tun?
Eine übliche Methode gegen einen stinkenden Kühlschrank besteht darin, Essig in den hinteren Teil den Ablaufs zu gießen und vorübergehend eine Tasse Essig in den Kühlschrank zu stellen.
Wie viel Platz muss ich um meinen Kühlschrank herum frei halten?
Um den Kühlschrank herum müssen mindestens 2,5 Zentimeter Freiraum vorhanden sein, damit eine ordnungsgemäße Belüftung möglich ist.
Was bedeutet R-410A?
R-410A ist ein Kältemittel, das in Maschinen verwendet wird, die auf null Grad Celsius abkühlen.
Wie hoch ist das Hotpoint HM315FF?
Das Hotpoint HM315FF hat eine Höhe von 1772 mm.
Wie breit ist das Hotpoint HM315FF?
Das Hotpoint HM315FF hat eine Breite von 543 mm.
Wie tief ist das Hotpoint HM315FF?
Das Hotpoint HM315FF hat eine Tiefe von 550 mm.
Ist das Handbuch der Hotpoint HM315FF unter Deutsch verfügbar?
Leider haben wir kein Handbuch für Hotpoint HM315FF in Deutsch verfügbar. Dieses Handbuch ist erhältlich in Englisch.
Brauchen Sie Hilfe?
Haben Sie eine Frage zum Hotpoint und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Hotpoint -Besitzer, Ihnen eine gute Antwort zu geben.
Anzahl der Fragen: 0