See Changing printer control panel configuration settings.
The computer port is not configured or is not working properly.Run another peripheral connected to this port to verify that the
port is working properly.
The printer has not been correctly named for the network or for
a Macintosh computer.
Use the appropriate utility to name the printer on the network.
For Macintosh OS 9.x computers, select the printer from within
the Chooser. For Macintosh OS 10.2 and later, open the Print
Center Application, select the connection type, and then select
the printer.
Printer not receiving data
Table 8-13 Printer is on, but is not receiving data
Cause and solution
Cause
Solution
The printer’s Ready indicator light is not lit.Press Stop to return the printer to the Ready state.
The top cover is not closed properly.Close the top cover firmly.
A printer message other than Ready appears on the printer
control panel.
See Control panel messages.
The interface cable is not correct for this configuration.Select the correct interface cable for your configuration. See
Parallel configuration, HP Jetdirect print servers, or USB
configuration.
The interface cable is not securely connected to both the
printer and the computer.
Disconnect and reconnect the interface cable. For Jetdirect
network connections, verify that the Link LED is on. The Link
LED indicates that a proper network connection is established.
The printer is not configured correctly.See Changing printer control panel configuration settings for
configuration information.
The interface configurations on the printer’s configuration page
do not match the configurations on the host computer.
Configure the printer to match the computer configuration.
The computer is not working properly.Try using an application that you know works properly to check
the computer, or, in DOS, type Dir>Prn at the DOS prompt.
The computer port that the printer is connected to is not
configured or is not working properly.
Run another peripheral connected to this port to verify that the
port is working properly.
The printer has not been correctly named for the network or
Macintosh computer.
Use the appropriate utility to name the printer on the network.
For Macintosh OS 9.x computers, select the printer from within
the Chooser. For Macintosh OS 10.2 and later, open the Print
Center Application, select the connection type, and select the
printer.
Table 8-12 Printer is on, but nothing prints (continued)
236 Chapter 8 Problem solving ENWW
Bedienungsanleitung
Sehen Sie sich hier kostenlos das Handbuch für HP Color LaserJet 4700dn an. Dieses Handbuch fällt unter die Kategorie Drucker und wurde von 1 Personen mit einem Durchschnitt von 10 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum HP Color LaserJet 4700dn oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage
Haben Sie eine Frage zum HP und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Samsung Galaxy A7-Besitzer, Ihnen eine gute Antwort zu geben.
Anzahl der Fragen: 0
HP Color LaserJet 4700dn-Spezifikationen
Nachfolgend finden Sie die Produktspezifikationen und die manuellen Spezifikationen zu HP Color LaserJet 4700dn.
Finden Sie die Antwort auf Ihre Frage nicht im Handbuch? Vielleicht finden Sie die Antwort auf Ihre Frage in den FAQs zu HP Color LaserJet 4700dn unten.
Was ist der beste Weg, um gestautes Papier aus meinem Drucker zu entfernen?
Ziehen Sie das Papier am besten vorsichtig aus dem Drucker. Schalten Sie den Drucker aus und stellen Sie sicher, dass der Druckkopf nicht über dem Papier hängt und dass kein Papier im Drucker verbleibt.
Wie kommt es, dass mein Drucker keine Originalpatronen akzeptiert?
Nicht-originale Patronen werden vom Drucker möglicherweise nicht erkannt. In diesem Fall erhalten Sie eine Meldung, dass die Patrone leer ist. Das Handbuch der gekauften Patrone enthält normalerweise die Lösung. Wenn dies nicht funktioniert, ist es ratsam, den Verkäufer zu kontaktieren.
Wie kommt es, dass meine Drucke von schlechter Qualität sind?
Es kann verschiedene Gründe für eine schlechte Druckqualität geben. Überprüfen Sie, ob die Patronen oder der Toner voll sind. In diesem Fall müssen Tintenstrahldrucker häufig gereinigt werden, oder die Patronen sind ausgetrocknet oder der Druckkopf ist defekt. Bei Laserdruckern wird empfohlen, den Laserdrucker zu kalibrieren.
Was ist der Unterschied zwischen einem Laserdrucker und einem Tintenstrahldrucker?
Ein Laserdrucker druckt mit einem Toner und ein Tintenstrahldrucker druckt mit Tinte.
Wie kommt es, dass mein Tintenstrahldrucker schwarze Streifen druckt?
In den meisten Fällen ist die Tintenstrahldruckerpatrone defekt und muss ersetzt werden.
Wofür steht DPI?
DPI steht für Dots Per Inch und ist die Anzahl der Tintentröpfchen (pro Zoll), die beim Drucken auf dem Papier landen.
Ist das Handbuch der HP Color LaserJet 4700dn unter Deutsch verfügbar?
Leider haben wir kein Handbuch für HP Color LaserJet 4700dn in Deutsch verfügbar. Dieses Handbuch ist erhältlich in Englisch.
Brauchen Sie Hilfe?
Haben Sie eine Frage zum HP und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Samsung Galaxy A7-Besitzer, Ihnen eine gute Antwort zu geben.
Anzahl der Fragen: 0