HP LaserJet 9050 Bedienungsanleitung

78 Chapter 4 Copying ENWW

Using Job Mode

Use the Job Mode feature to build a single print job from multiple scans. You can use either the

ADF or the scanner glass. The settings for the first scan are used for subsequent scans.

1 Touch Copy.

3 Touch Advanced.

5 Select any output settings. if necessary

6 After each page is scanned, the control panel prompts you for more pages.

7 Do one of the following:

• If the job contains more pages, load the next page, and then press

START.

of the pages in that document by using the ADF. If you scan the first page of a document by using

the flatbed scanner, then you must scan all of the pages in that document by using the flatbed

scanner.

Modifying copy settings for the current job

You can modify your copies by adjusting the contrast, reducing or enlarging the size, or

enhancing the quality.

Adjusting the copy contrast

Reducing or enlarging copies

The MFP has an autoscaling feature. If the original paper size differs from the copy paper size,

the MFP can autodetect a size mismatch between the original page size and the copy page size.

The scanned image of the original page is reduced or enlarged automatically to match the copy

paper size. You can override autoscaling by using the reduce and enlarge feature.

The MFP can reduce copies to as little as 25% of the original size and enlarge copies to as much

as 400% of the original (200% when using the ADF).

Enhancing copies

enhancement screen.