In addition to the problems that are listed in Solve general device problems on page 150, this section
lists problems that can occur when using Mac OS X.
NOTE:Setup for USB and IP printing is performed through the Desktop Printer Utility. The device
will not appear in the Chooser.
The printer driver is not listed in the Print Center or Printer Setup Utility.
Cause
Solution
The device software might not have been installed or was installed
incorrectly.
Make sure that the PPD is in the following hard drive folder:
Library/Printers/PPDs/Contents/Resources/
<lang>.lproj, where “<lang>” represents the two-letter language
code for the language that you are using. If necessary, reinstall the
software. See the getting started guide for instructions.
The Postscript Printer Description (PPD) file is corrupt.Delete the PPD file from the following hard drive folder: Library/
Printers/PPDs/Contents/Resources/<lang>.lproj,
where “<lang>” represents the two-letter language code for the
language that you are using. Reinstall the software. See the getting
started guide for instructions.
The device name, IP address, or Rendezvous host name does not appear in the printer list in the Print Center or Printer Setup
Utility.
Cause
Solution
The device might not be ready.Make sure that the cables are connected correctly, the device is on,
and the Ready light is on. If you are connecting through a USB or
Ethernet hub, try connecting directly to the computer, or use a
different port.
The wrong connection type might be selected.Make sure that USB, IP Printing, or Rendezvous is selected,
depending on the type of connection that exists between the device
and the computer.
The wrong device name, IP address, or Rendezvous host name is
being used.
Check the device name, IP address, or Rendezvous host name by
printing a configuration page. See
Use information pages
on page 124. Verify that the name, IP address, or Rendezvous host
name on the configuration page matches the device name, IP
address, or Rendezvous host name in the Print Center or Printer
Setup Utility.
The interface cable might be defective or of poor quality.Replace the interface cable. Make sure to use a high-quality cable.
The printer driver does not automatically set up the selected device in the Print Center or Printer Setup Utility.
Cause
Solution
The device might not be ready.Make sure that the cables are connected correctly, the device is on,
and the Ready light is on. If you are connecting through a USB or
Ethernet hub, try connecting directly to the computer or use a different
port.
The device software might not have been installed or was installed
incorrectly.
Make sure that the PPD file is in the following hard drive folder:
Library/Printers/PPDs/Contents/Resources/
<lang>.lproj, where “<lang>” represents the two-letter language
200 Chapter 11 Problem solving ENWW
Bedienungsanleitung
Sehen Sie sich hier kostenlos das Handbuch für HP LaserJet M3027x an. Dieses Handbuch fällt unter die Kategorie Drucker und wurde von 1 Personen mit einem Durchschnitt von 5.1 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum HP LaserJet M3027x oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage
Haben Sie eine Frage zum HP und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Samsung Galaxy A7-Besitzer, Ihnen eine gute Antwort zu geben.
Anzahl der Fragen: 0
HP LaserJet M3027x-Spezifikationen
Nachfolgend finden Sie die Produktspezifikationen und die manuellen Spezifikationen zu HP LaserJet M3027x.
Finden Sie die Antwort auf Ihre Frage nicht im Handbuch? Vielleicht finden Sie die Antwort auf Ihre Frage in den FAQs zu HP LaserJet M3027x unten.
Was ist der beste Weg, um gestautes Papier aus meinem Drucker zu entfernen?
Ziehen Sie das Papier am besten vorsichtig aus dem Drucker. Schalten Sie den Drucker aus und stellen Sie sicher, dass der Druckkopf nicht über dem Papier hängt und dass kein Papier im Drucker verbleibt.
Wie kommt es, dass mein Drucker keine Originalpatronen akzeptiert?
Nicht-originale Patronen werden vom Drucker möglicherweise nicht erkannt. In diesem Fall erhalten Sie eine Meldung, dass die Patrone leer ist. Das Handbuch der gekauften Patrone enthält normalerweise die Lösung. Wenn dies nicht funktioniert, ist es ratsam, den Verkäufer zu kontaktieren.
Wie kommt es, dass meine Drucke von schlechter Qualität sind?
Es kann verschiedene Gründe für eine schlechte Druckqualität geben. Überprüfen Sie, ob die Patronen oder der Toner voll sind. In diesem Fall müssen Tintenstrahldrucker häufig gereinigt werden, oder die Patronen sind ausgetrocknet oder der Druckkopf ist defekt. Bei Laserdruckern wird empfohlen, den Laserdrucker zu kalibrieren.
Was ist der Unterschied zwischen einem Laserdrucker und einem Tintenstrahldrucker?
Ein Laserdrucker druckt mit einem Toner und ein Tintenstrahldrucker druckt mit Tinte.
Wie kommt es, dass mein Tintenstrahldrucker schwarze Streifen druckt?
In den meisten Fällen ist die Tintenstrahldruckerpatrone defekt und muss ersetzt werden.
Wofür steht DPI?
DPI steht für Dots Per Inch und ist die Anzahl der Tintentröpfchen (pro Zoll), die beim Drucken auf dem Papier landen.
Ist das Handbuch der HP LaserJet M3027x unter Deutsch verfügbar?
Leider haben wir kein Handbuch für HP LaserJet M3027x in Deutsch verfügbar. Dieses Handbuch ist erhältlich in Englisch.
Brauchen Sie Hilfe?
Haben Sie eine Frage zum HP und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Samsung Galaxy A7-Besitzer, Ihnen eine gute Antwort zu geben.
Anzahl der Fragen: 0