Name: Jammin Pro 5480002
Brand: Jammin Pro
SKU: 204250
Rating: 81 (2 reviews)

BedienungsanleitungJammin Pro 5480002

The PAN control determines the position of channel signal within the stereo image. This control features a

constant-power characteristic, which means the signal is always maintained at a constant level, irrespective

of position in the stereo panorama.

PAN

The LEVEL control determines the level of the channel signal in the main mix

LEVEL

The CLIP LED”s of the mono channels illuminate when the input signal is driven too high, which could

cause distortion. If this happens, use the TRIM control to reduce the preamp level until the LED does not

light anymore.

CLIP

2.2 Stereo channels

As the name suggests, the FX sends of the ME mixing consoles are intended to drive effects devices (reverb,

delay, etc.) and are therefore configured post-fader. This means that the mix between dry signal and effect

remains at the level determined by the channel’s aux send, irrespective of the level fader setting. If this were

not the case, the effects signal of the channel would remain audible even when the fader is lowered to zero.

With ME mixing consoles the channel fader is called LEVEL control.

In the StudioMIX 10/StudioMix 12, the FX send is routed directly to the built-in effects processor. To

make sure that the effects processor receives an input signal, you should not turn this control all the way to

the left (-∞ ).

Attention: Since the FX path for the effect processor is connected post-fader, the LEVEL

control has to be turned up in order to get this channels signal to the effects processor!

LINE IN 3/4

MONO

BAL

UNBAL LINE IN 5/6

MONO

BAL

UNBAL

LINE IN 7/8 LINE IN 9/10

- +15

L R

BAL

CLIP

- +15

3/4LEVEL

- +15

L R

BAL

CLIP

- +15

5/6LEVEL

- +15

L R

BAL

CLIP

- +15

7/8LEVEL

- +15

L R

BAL

CLIP

- +15

9/10LEVEL+4-10+4-10+4-10+4-10

MONO

BAL

UNBAL

MONO

BAL

UNBAL

FX FX FX FX

Fig. 2.2: Connectors and controls on the stereo channels

3. APPLICATION

1 2

+10 -40 +10 +60

TRIM

dB/dBu

BAL

UNBAL

LINE

MIC

+10 -40 +10 +60

TRIM

dB/dBu

BAL

UNBAL

LINE

MIC

MAIN OUT

CTRL ROOM OUTLINE IN 3/4

MONO

BAL

UNBAL LINE IN 5/6

MONO

BAL

UNBAL

LINE IN 7/8 LINE IN 9/10

SEND FXPHONES

- +15

L R

-15 +15

PAN

HIGH

12 KHz

MID

2.5 KHz

LOW

80 Hz

CLIP

- +15

LEVEL

- +15

L R

-15 +15

PAN

HIGH

12 KHz

MID

2.5 KHz

LOW

80 Hz

CLIP

- +15

LEVEL

- +15

L R

BAL

CLIP

- +15

3/4

LEVEL

- +15

L R

BAL

CLIP

- +15

5/6

LEVEL

- +15

L R

BAL

CLIP

- +15

7/8

LEVEL

- +15

L R

BAL

CLIP

- +15

9/10

LEVEL

-10

CD/TAPEIN OUTTAPE TO MIXTAPE TO CTRL

TO CTRL

+48 V

POWER

- +15

PHONES

- +15

FX SENDSL

CLIP

MAIN MIX

MONO

BAL

UNBAL

PHANTOM

MONO

BAL

UNBAL

FX FX FX FX

PROGRAM(PUSH)

LOW CUT

75Hz

18 dB/Oct

LOW CUT

75Hz

18 dB/Oct

ME1002 FX

HIGH QUALITY 14 INPUT 2/2 BUS MIXER 24-BIT DSP FX PROCESSOR

REVERB 00-39

ER/DLY 40-59

MOD 60-73

PITCH 74-79

MULTI 80-99

-3-6-10-15-20

CLP

24-BIT DUAL ENGINE DSP

24-BIT A/D & D/A CONVERTER

TAPE

+6. .66

MIDI sound module

CD player

Active monitor

Digital Audio workstation

microphone

Guitar

keyboard

Fig. 3.1: the StudioMix in a recording studio

3.1 Recording studio

Headphone

MD recorder

Sehen Sie sich hier kostenlos das Handbuch für Jammin Pro 5480002 an. Dieses Handbuch fällt unter die Kategorie mischer und wurde von 2 Personen mit einem Durchschnitt von 8.1 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum Jammin Pro 5480002 oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage

Brauchen Sie Hilfe?

Haben Sie eine Frage zum Jammin Pro und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Jammin Pro -Besitzer, Ihnen eine gute Antwort zu geben.

Anzahl der Fragen: 0