Markbass MB7 Distorsore Bedienungsanleitung

Markbass MB7 Distorsore
(1)
  • Anzahl Seiten: 2
  • Dateityp: PDF
LIMITED WARRANTY
Markbass oers an international limited warranty on Markbass products purchased from any
authorized Markbass dealer, eective from the day of purchase. The terms of this warranty
vary from country to country; please contact the Markbass distributor in your country for
details.
Please register this product online at www.markbass.it to establish the date of purchase.
However, please note that you are required to retain a copy of your receipt as proof of
purchase in order to receive warranty service.
This warranty does not apply to any damage to the product caused by misuse, mishandling,
accident, abuse, alteration, modication or unauthorized repairs. Product appearance and
normal wear and tear (worn paint, scratches, etc.) are not covered by this warranty. Markbass
reserves the right to be the sole arbiter regarding the misuse or abuse of this product.
Markbass assumes no liability for any incidental or consequential damages, which may result
from the failure of this product. Any warranties implied in fact or by law are limited to the
duration of this express limited warranty. Your legal rights related to the warranty will vary
depending on the country of purchase.
WARRANTY CARD
This product is guaranteed by the warranty provided in the country of purchase, under the
following conditions:
A - The Markbass warranty is only applicable if this document been properly completed (here
or online) and if the original invoice/bill of sale, mentioning model, serial number and
purchase date, is presented together with this document.
B - The obligations of Markbass are limited to the repair of defects. Warranty repair eligibility
will be decided at the sole discretion of Markbass or its representatives. Freight, freight
insurance costs, and any other costs related to the repair of this product are not covered by
this warranty.
C - All warranty repairs must be made by Markbass or an authorized Markbass (PARSEK)
service center.
D - This warranty does not apply in the following instances:
if the damage was caused by accident, negligence or modications; use of non Markbass
spare parts; or improper use, installation or packing;
• if the serial number on the equipment is illegible;
if the damage was caused by lightning, water, re, incorrect main voltage, insufficient
ventilation or any other cause beyond the control of Markbass.
E - Markbass reserves the right to redesign or improve/modify its product at any time without
any obligation to modify previously manufactured products.
Parsek srl. - Italy - 66020 San Giovanni Teatino (Ch) - Via Po, 52/A Tel. +39 085 446 37 55 - Fax
+39 085 440 77 64 - www.markbass.it - info@markbass.it
TECHNICAL SPECS
INPUT IMPEDANCE:
1.5 Mohm / 6 Vpp
OUTPUT IMPEDANCE:
100 ohm / 6 Vpp
DRIVE:
+50dB (maximum gain)
LEVEL OUTPUT: 0 to Max
GRAPHIC EQ: Freq. (Hz): 40, 80, 250, 400, 1200, 2000, 4000
Level: (-16dB, +16dB)
POWER REQUIREMENTS- DC INPUT: +9/+12VDC or standard 9-volt battery
DIMENSIONS:
98.8 x 38.3 x 124.2 mm / 3.89” x 1.51” x 4.89”
WEIGHT:
405 g / 0.89 lbs
BLOCK DIAGRAM

OWNER’S MANUAL

In
distortion
Drive Level
Out
equalizer
40 80
250
400
1.2K
2K 4K
Markbass MB7 Distorsore

Brauchen Sie Hilfe?

Anzahl der Fragen: 0

Haben Sie eine Frage zum Markbass MB7 Distorsore oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je detaillierter Sie Ihr Problem und Ihre Frage angeben, desto einfacher können andere Markbass MB7 Distorsore-Eigentümer Ihre Frage richtig beantworten.

Sehen Sie sich hier kostenlos das Handbuch für Markbass MB7 Distorsore an. Dieses Handbuch fällt unter die Kategorie Nicht kategorisiert und wurde von 1 Personen mit einem Durchschnitt von 7.5 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum Markbass MB7 Distorsore oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage

Markbass MB7 Distorsore-Spezifikationen

Allgemeines
Marke Markbass
Model MB7 Distorsore
Produkte Nicht kategorisiert
Sprache Englisch
Dateityp PDF
Merkmale
Produkttyp Effektpedal
Produktfarbe Schwarz
LED-Anzeigen Ja
Produkttyp Effektpedal
Produktfarbe Schwarz
Gewicht und Abmessungen
Breite 98.8 mm
Tiefe 38.3 mm
Höhe 124.2 mm
Gewicht 405 g
Breite 98.8 mm
Tiefe 38.3 mm
Höhe 124.2 mm
Gewicht 405 g
Mehr anzeigen

Häufig gestellte Fragen

Nachfolgend finden Sie die am häufigsten gestellten Fragen zu Markbass MB7 Distorsore .

Ist Ihre Frage nicht aufgeführt? Stellen Sie hier Ihre Frage