THIS PRODUCT INCLUDES INSTRUCTIONS FOR INSTALLATION
WHICH MUST BE CAREFULLY FOLLOWED. THE INSTRUCTIONS
ARE WORDED IN SUCH A MANNER TO ASSUME THAT THE
INSTALLER IS CAPABLE OF COMPLETING THESE TYPE OF
ELECTRONIC INSTALLATIONS. IF YOU ARE UNCLEAR AS TO
WHAT YOU ARE INSTRUCTED TO DO OR BELIEVE THAT YOU DO
NOT UNDERSTAND THE INSTRUCTIONS SO AS TO PROPERLY
AND SAFELY COMPLETE THE INSTALLATION YOU SHOULD
CONSULT A TECHNICIAN WHO DOES HAVE THIS KNOWLEDGE
AND UNDERSTANDING.
FAILURE TO FOLLOW THESE INSTRUCTIONS CAREFULLY
AND TO INSTALL THE INTERFACE AS DESCRIBED COULD
CAUSE HARM TO THE VEHICLE OR TO SAFETY SYSTEMS
ON THE VEHICLE. INTERFERENCE WITH CERTAIN SAFETY
SYSTEMS COULD CAUSE HARM TO PERSONS AS WELL.
IF YOU HAVE ANY QUESTIONS IN THIS REGARD PLEASE
CALL THE HELP LINE OR THE METRA AT 1-800-221-0932
FOR ASSISTANCE.
CHTO-013 CHTO-013
* READ IMPORTANT WARNING INSIDE
BEFORE ATTEMPTING ANY INSTALLATION
THE CHTO-013 IS DESIGNED TO BE USED WITH
VEHICLES THAT HAVE A FACTORY AMPLIFIED
SYSTEM. THE CHTO-013 WILL PROVIDE A 12-VOLT
SWITCHED WIRE FOR PROPER RADIO OPERATION.
THE CHTO-013 NOW PROVIDES MUTE, PARKING
BRAKE, VSS OR SPEED SENSE, AND A REVERSE
OUTPUT TO MAKE INSTALLING AN AFTERMARKET
NAVIGATIONAL RADIO SIMPLER AND LESS TIME
COMSUMING.
Cutting Tool • Tape • Crimping Tool • Connectors
TOOLS REQUIRED FOR INSTALLATION
When using the CHTO-013 with a radio that has a high audio
pre-out voltage, usually greater than 2 volts, the audio signal
may become distorted. To resolve this follow these steps:
1.Make sure the ignition is turned to the “off” position.
2.Disconnect both of the harnesses from the CHTO-013.
3.Locate the potentiometer next to the 14-pin connector at
the end of the CHTO-013.
4.Taking a small flat headed screwdriver, turn the
potentiometer counter-clockwise to lower the input
level going to the factory amplifier.
5.After making the adjustment reconnect the wire harnesses.
4
REV. 03-17-11INSTCHTO-013
POTENTIOMETER
AUDIO LEVEL
ADJUSTMENT
INTERFACE COMPONENTS
• CHTO-013 • 14-PIN HARNESS WITH RCA’S
• (2) 12-PIN HARNESSES TO 22-PIN CHRYSLER HARNESSES
AUDIO LEVEL CONTROL
Sehen Sie sich hier kostenlos das Handbuch für Metra CHTO-013 an. Dieses Handbuch fällt unter die Kategorie car kits und wurde von 1 Personen mit einem Durchschnitt von 7.1 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum Metra CHTO-013 oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage
Brauchen Sie Hilfe?
Haben Sie eine Frage zum Metra und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Metra -Besitzer, Ihnen eine gute Antwort zu geben.
Brauchen Sie Hilfe?
Haben Sie eine Frage zum Metra und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Metra -Besitzer, Ihnen eine gute Antwort zu geben.
Anzahl der Fragen: 0