Milwaukee 2667-20

Milwaukee 2667-20 Bedienungsanleitung

(1)
  • 2
    3
    BATTERY TOOL USE AND CARE
    PERSONAL SAFETY
    GENERAL POWER TOOL SAFETY WARNINGS
    WORK AREA SAFETY
    ELECTRICAL SAFETY
    Keep work area clean and well lit. Cluttered or
    dark areas invite accidents.
    Do not operate power tools in explosive atmos-
    pheres, such as in the presence of ammable
    liquids, gases or dust. Power tools create sparks
    which may ignite the dust or fumes.
    Keep children and bystanders away while
    operating a power tool. Distractions can cause
    you to lose control.
    Power tool plugs must match the outlet. Never
    modify the plug in any way. Do not use any
    adapter plugs with earthed (grounded) power
    tools. Unmodi ed plugs and matching outlets will
    reduce risk of electric shock.
    Avoid body contact with earthed or grounded
    surfaces such as pipes, radiators, ranges and
    refrigerators. There is an increased risk of electric
    shock if your body is earthed or grounded.
    Do not expose power tools to rain or wet condi-
    tions. Water entering a power tool will increase
    the risk of electric shock.
    Do not abuse the cord. Never use the cord for
    carrying, pulling or unplugging the power tool.
    Keep cord away from heat, oil, sharp edges
    or moving parts. Damaged or entangled cords
    increase the risk of electric shock.
    When operating a power tool outdoors, use an
    extension cord suitable for outdoor use. Use
    of a cord suitable for outdoor use reduces the risk
    of electric shock.
    If operating a power tool in a damp location is
    unavoidable, use a ground fault circuit inter-
    rupter (GFCI) protected supply. Use of an GFCI
    reduces the risk of electric shock.
    Remove any adjusting key or wrench before
    turning the power tool on. A wrench or a key left
    attached to a rotating part of the power tool may
    result in personal injury.
    Do not overreach. Keep proper footing and
    balance at all times. This enables better control
    of the power tool in unexpected situations.
    Dress properly. Do not wear loose clothing or
    jewellery. Keep your hair, clothing and gloves
    away from moving parts. Loose clothes, jewel-
    lery or long hair can be caught in moving parts.
    If devices are provided for the connection of
    dust extraction and collection facilities, ensure
    these are connected and properly used. Use of
    dust collection can reduce dust-related hazards.
    WARNING READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS. Failure
    to follow the warnings and instructions may result in electric shock, re and/or serious
    injury. Save all warnings and instructions for future reference. The term "power
    tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated
    (cordless) power tool.
    POWER TOOL USE AND CARE
    Do not force the power tool. Use the correct
    power tool for your application. The correct
    power tool will do the job better and safer at the
    rate for which it was designed.
    Do not use the power tool if the switch does not
    turn it on and off. Any power tool that cannot be
    controlled with the switch is dangerous and must
    be repaired.
    Disconnect the plug from the power source
    and/or the battery pack from the power tool
    before making any adjustments, changing
    accessories, or storing power tools. Such pre-
    ventive safety measures reduce the risk of starting
    the power tool accidentally.
    Store idle power tools out of the reach of chil-
    dren and do not allow persons unfamiliar with
    the power tool or these instructions to operate
    the power tool. Power tools are dangerous in the
    hands of untrained users.
    Maintain power tools. Check for misalignment
    or binding of moving parts, breakage of parts
    and any other condition that may affect the
    power tool’s operation. If damaged, have the
    power tool repaired before use. Many accidents
    are caused by poorly maintained power tools.
    Keep cutting tools sharp and clean. Properly
    maintained cutting tools with sharp cutting edges
    are less likely to bind and are easier to control.
    Use the power tool, accessories and tool bits
    etc. in accordance with these instructions, tak-
    ing into account the working conditions and
    the work to be performed. Use of the power tool
    for operations different from those intended could
    result in a hazardous situation.
    Stay alert, watch what you are doing and use
    common sense when operating a power tool.
    Do not use a power tool while you are tired or
    under the in uence of drugs, alcohol or medi-
    cation. A moment of inattention while operating
    power tools may result in serious personal injury.
    Use personal protective equipment. Always
    wear eye protection. Protective equipment such
    as dust mask, non-skid safety shoes, hard hat, or
    hearing protection used for appropriate conditions
    will reduce personal injuries.
    Prevent unintentional starting. Ensure the
    switch is in the off-position before connecting
    to power source and/or battery pack, picking
    up or carrying the tool. Carrying power tools with
    your nger on the switch or energising power tools
    that have the switch on invites accidents.
    Recharge only with the charger speci ed by
    the manufacturer. A charger that is suitable for
    one type of battery pack may create a risk of re
    when used with another battery pack.
    Hold power tool by insulated gripping surfaces,
    when performing an operation where the
    fastener may contact hidden wiring. Fastener
    contacting a “live” wire may make exposed metal
    parts of the power tool “live” and could give the
    operator an electric shock.
    Maintain labels and nameplates. These carry
    important information. If unreadable or missing,
    contact a MILWAUKEE service facility for a free
    replacement.
    WARNING Some dust created by power sanding,
    sawing, grinding, drilling, and other construction
    activities contains chemicals known to cause
    cancer, birth defects or other reproductive harm.
    Some examples of these chemicals are:
    lead from lead-based paint
    crystalline silica from bricks and cement and
    other masonry products, and
    arsenic and chromium from chemically-treated
    lumber.
    Your risk from these exposures varies, depending
    on how often you do this type of work. To reduce
    your exposure to these chemicals: work in a well
    ventilated area, and work with approved safety
    equipment, such as those dust masks that are spe-
    cially designed to lter out microscopic particles.
    SPECIFIC SAFETY RULES
    SYMBOLOGY
    WARNING Risk of electric
    shock.
    Volts
    Direct Current
    Impacts per Minute Under
    Load (IPM)
    No Load Revolutions per
    Minute (RPM)
    C
    US
    Underwriters Laboratories, Inc.
    United States and Canada
    SERVICE
    Use power tools only with speci cally desig-
    nated battery packs. Use of any other battery
    packs may create a risk of injury and re.
    When battery pack is not in use, keep it away
    from other metal objects like paper clips,
    coins, keys, nails, screws, or other small metal
    objects that can make a connection from one
    terminal to another. Shorting the battery terminals
    together may cause burns or a re.
    Under abusive conditions, liquid may be eject-
    ed from the battery; avoid contact. If contact
    accidentally occurs, ush with water. If liquid
    contacts eyes, additionally seek medical help.
    Liquid ejected from the battery may cause irritation
    or burns.
    Have your power tool serviced by a quali ed
    repair person using only identical replacement
    parts. This will ensure that the safety of the power
    tool is maintained.
    SPECIFICATIONS
    FUNCTIONAL DESCRIPTION
    Cat. No. Volts DC RPM IPM Fastening Torque
    2667-20
    2668-20
    18
    18
    High 0-2250
    Low 0-1500
    High 0-2250
    Low 0-1500
    High 0-3400
    Low 0-2400
    High 0-3400
    Low 0-2400
    675 in-lbs
    350 in-lbs
    60 ft-lbs
    30 ft-lbs
    1. 1/4" Hex drive chuck (2667-20)
    2. Drive head
    3. Drive head screw
    4. LED
    5. Paddle Switch
    6. Control Switch
    7. Speed control
    8. Insulated gripping surface
    9. 3/8" Square drive anvil (2668-20)
    1
    4
    5
    7
    9
    6
    2
    3
    8
Milwaukee 2667-20

Brauchen Sie Hilfe?

Anzahl der Fragen: 0

Haben Sie eine Frage zum Milwaukee 2667-20 oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je detaillierter Sie Ihr Problem und Ihre Frage angeben, desto einfacher können andere Milwaukee 2667-20-Eigentümer Ihre Frage richtig beantworten.

Sehen Sie sich hier kostenlos das Handbuch für Milwaukee 2667-20 an. Dieses Handbuch fällt unter die Kategorie Bohrmaschinen und wurde von 1 Personen mit einem Durchschnitt von 7.5 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Engels, Frans, Spaans. Haben Sie eine Frage zum Milwaukee 2667-20 oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage

Milwaukee 2667-20-Spezifikationen

Allgemeines
Marke Milwaukee
Model 2667-20
Produkte Bohrmaschine
Sprache Engels, Frans, Spaans
Dateityp PDF

Häufig gestellte Fragen

Nachfolgend finden Sie die am häufigsten gestellten Fragen zu Milwaukee 2667-20 .

Ist Ihre Frage nicht aufgeführt? Stellen Sie hier Ihre Frage

Bedienungsanleitu.ng

Auf der Suche nach einer Bedienungsanleitung? Bedienungsanleitu.ng sorgt dafür, dass Sie in Windeseile die Bedienungsanleitung finden, die Sie suchen. In unserer Datenbank befinden sich mehr als 1 Million PDF Bedienungsanleitungen von über 10.000 Marken. Jeden Tag fügen wir die neuesten Bedienungsanleitungen hinzu, damit Sie jederzeit das Produkt finden, das Sie suchen. Es ist ganz einfach: Tippen Sie in der Suchleiste Markenname und Produkttyp ein und Sie können direkt die Bedienungsanleitung Ihrer Wahl gratis online einsehen.

Bedienungsanleitu.ng

© Copyright 2021 Bedienungsanleitu.ng. Alle Rechte vorbehalten.

Diese Website benutzen Cookies. Wenn Sie die Website weiter nutzen, stimmen Sie der Verwendung von Cookies zu.

Erfahren Sie mehr