Optoma Pico 320 Bedienungsanleitung

Optoma Pico 320
(1)
  • Anzahl Seiten: 25
  • Dateityp: PDF
2
1. Do not block any ventilation openings.
To ensure reliable operation of the
projector and to protect from over
heating, it is recommended to install
the projector in a location that does not
block ventilation. As an example, do not
place the projector on a crowded coffee
table, sofa, bed, etc. Do not put the
projector in an enclosure such as a book
case or a cabinet that restricts air ow.
2. Do not use the projector near water or
moisture. To reduce the risk of re and/
or electric shock, do not expose the
projector to rain or moisture.
3. Do not install near heat sources such as
radiators, heaters, stoves or any other
apparatus such as ampliers that emits
heat.
4. Do not use the projector in direct
sunlight.
5. Do not use near any appliance
generating a strong magnetic eld.
6. Do not use the projector in areas
susceptible to excessive dust and dirt.
7. Turn off the product before cleaning.
8. Turn off the product before removing
the battery.
9. Disconnect the battery if the product is
not being used for a long period of time.
10. Ensure that the ambient room
temperature is within 5- 35°C.
11. Relative Humidity is 5 - 35°C, 80%
(Max.), non-condensing.
12. Do not expose the battery to
temperatures above +60°C (+140°F)
13. New or idle batteries can have short-
term reduced capacity. Fully charge the
battery before initial use.
14. Do not put the battery into your mouth.
15. Do not let the battery contacts touch
another metal object.
16. Do not drop, throw or try to bend your
product.
17. May explode if disposed of in re.
18. Clean only with dry cloth.
19. Only use attachments/accessories
specied by the manufacturer.
20. Do not use the unit if it has been
physically damaged or abused. Physical
damage/abuse would be (but not
limited to):
Unit has been dropped.
Charger or plug has been damaged.
Liquid has been spilled on to the
projector.
Projector has been exposed to rain or
moisture.
Something has fallen in the projector
or something is loose inside.
Do not attempt to service the unit
yourself. Opening or removing covers
may expose you to dangerous voltages
or other hazards. Please contact your
local reseller or service center before you
send the unit for repair.
21. Do not let objects or liquids enter the
projector. They may touch dangerous
voltage points and short out parts that
could result in re or electric shock.
22. See projector enclosure for safety related
markings.
23. The unit should only be repaired by
appropriate service personnel.
24. Do not touch the projector for a long
time while the projector is used.
25. CAUTION: Risk of Explosion if Battery
is replaced by an Incorrect Type.
26. Dispose of Used Batteries According to
the Instructions.

Important Safety InStructIon

eye Safety WarnIngS

Avoid staring/facing directly into the projector beam at all times. Keep your back
to the beam as much as possible.
A stick or laser pointer is recommended to avoid the need for the user to enter
the beam.
When projector is used in a classroom, adequately supervise students when they
are asked to point out something on the screen.
In order to minimize power, use room blinds to reduce ambient light levels.
CLASS 1 LED PRODUCT
This appendix lists the general notices of
your Projector.
FCC notice
This device has been tested and found to
comply with the limits for a Class B digital
device pursuant to Part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This device generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instruc-
tions, may cause harmful interference to
radio communications.
However, there is no guarantee that inter-
ference will not occur in a particular instal-
lation. If this device does cause harmful
interference to radio or television reception,
which can be determined by turning the
device off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
device and receiver.
• Connect the device into an outlet on
a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced
radio/television technician for help.
Notice: Shielded cables
All connections to other computing
devices must be made using shielded
cables to maintain compliance with
FCC regulations.
Caution
Changes or modications not
expressly approved by the manufac-
turer could void the user’s authority,
which is granted by the Federal
Communications Commission, to
operate this device.
Operation conditions
This device complies with Part 15 of the
FCC Rules. Operation is subject to the fol-
lowing two conditions:
1. this device may not cause harmful
interference, and
2. this device must accept any interfer-
ence received, including interference
that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian
ICES-003.
Remarque à l’intention des utilisateurs canadiens
Cet appareil numerique de la classe B est conforme a la
norme NMB-003 du Canada.
Declaration of Conformity for EU countries
EMC Directive 2004/108/EC (including
amendments)
Low Voltage Directive 2006/95/EC
R & TTE Directive 1999/5/EC (if product has
RF function)

regulatIon & Safety notIceS

DISpoSal of olD electrIcal & electronIc

equIpment

(Applicable throughout the European Union and other European countries with
separate collection programs)
This symbol found on your product or on its packaging, indicates that this product should
not be treated as household waste when you wish to dispose of it. Instead, it should be
handed over to an applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences to the environment and human health, which could
otherwise be caused by inappropriate disposal of this product. The recycling of materials
will help to conserve natural resources.
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or
dealer and ask for the correct method of disposal.
The requirements for the gloss of housing apply to peripheral devices used
at the visual display workplace according to BildscharbV. Peripheral devices
intended for use outside the visual display workplace can receive a GS-Mark
if the scope is indicated in the User’s Manual as well as the certicate.
That means the following wording is possible in situations where the use
within the eld of view is not intended and where sufcient hints are given
in the User’s Manual for the avoidance of such situations to ensure that
display work is not affected.
Wording in the certicate: “This device is not intended for use in the direct
eld of view at visual display workplaces. To avoid incommoding reexions
at visual display workplaces this device must not be placed in the direct
eld of view.”
a.2.9.31 gloSS of houSIng of perIpheral

DevIceS (15

th

/ 22 meetIng ag1 eK1):

2
Optoma Pico 320

Brauchen Sie Hilfe?

Anzahl der Fragen: 0

Haben Sie eine Frage zum Optoma Pico 320 oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je detaillierter Sie Ihr Problem und Ihre Frage angeben, desto einfacher können andere Optoma Pico 320-Eigentümer Ihre Frage richtig beantworten.

Sehen Sie sich hier kostenlos das Handbuch für Optoma Pico 320 an. Dieses Handbuch fällt unter die Kategorie Videoprojektoren und wurde von 1 Personen mit einem Durchschnitt von 9.2 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum Optoma Pico 320 oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage

Optoma Pico 320-Spezifikationen

Für großartiges Audio müssen keine externen Lautsprecher gekauft werden. Mit integrierten Lautsprechern ist dieses Displ...
Mit DVI- und HDMI-Anschlüssen ist dieser Bildschirm für brillante HD-Bilder über eine reibungslose digitale Verbindung b...
Bequem in der Handfläche mit einer Fernbedienung, mit der Sie Ihr Display einfacher als je zuvor steuern können.
Allgemeines
Marke Optoma
Model Pico 320
Produkte Videopprojektor
EAN 5053460908664, 5053973533223, 704364210364, 71020175108, 7123290500937, 796435417246, 7964354172468
Sprache Englisch
Dateityp PDF
Projektor
Projektorhelligkeit 100 ANSI Lumen
Projektionstechnologie DLP
native Auflösung des Projektors WVGA (854x480)
Projektionsflächenkapazität 40 - 150 Zoll
Projektionsabstand 0.13 - 6 m
Kontrastverhältnis 2000:1
Sonstige Funktionen
Seitenverhältnis 4:3
RS-232 port 0
Übertragungstechnik Verkabelt
Audioanschlüsse Ja
Audioausgang Ja
USB-Massenspeicher Ja
Abmessungen (BxTxH) 120 x 70 x 30 mm
Netzteiltyp AC/DC
Kompatibilität NB, iPhone, iPad2, Blackberry, PC
Bedienfeld Ja
Weitere Anschlüsse HDMI, VGA, AV
Audio-System 1.0
Linsensystem
Zoomverhältnis -
Zoom-Fähigkeit Nein
Fokus Manuell
Brennweitenbereich - mm
Blendenbereich (F-F) -
Projektionsverhältnis 1.8 - 2.1:1
Lichtquelle
Lebensdauer der Lichtquelle 20000 h
Anzahl Lampe(n) 1 Lampen
Typ der Lichtquelle LED
Multimedia
Unterstützte Videoformate 3GP,ASF,AVI,FLV,MP4,TS,WMV
Unterstützte Bildformate JPG
Unterstützte Audioformate AIFF,ASF,MP3,MS-ADPCM
Unterstützte Dokumentenformate DOC,DOCX,PDF
Eingebaute Lautsprecher Ja
Anzahl eingebauter Lautsprecher 1
RMS-Leistung 1 W
TV Tuner integriert Nein
Video
Analoges Signalformatsystem -
Full-HD Nein
HD-Ready Ja
3D Nein
3D Ready Nein
Bildschirm
Eingebaute Anzeige Nein
Anschlüsse und Schnittstellen
Anzahl VGA (D-Sub) Anschlüsse 1
Anzahl HDMI-Anschlüsse 1
Anzahl USB 2.0 Anschlüsse 1
Anzahl USB 3.2 Gen 1 (3.1 Gen 1) Typ-A Ports 0
USB-Stecker Micro-USB A
Composite Video-Eingang 1
Composite Video-Ausgang 0
Audioeingang (L, R) 1
Audio (L,R) Out 0
Kopfhörerausgänge 1
Mikrofon-Eingang Nein
Anzahl DisplayPort Anschlüsse 0
Anzahl S-Video-Eingänge 0
Komponenteneingang Video (YPbPr/YCbCr) 0
DVI Anschluss Nein
PC Audio-Eingang Ja
CardBus PCMCIA Slot-Typ Nein
Stromeingang Nein
AUX-Eingang Nein
AV-Ausgang Nein
PC Audio Ausgang Nein
BNC Eingänge 0
Optischer Audio-Digitalausgang 0
Netzwerk
Anzahl Ethernet-LAN-Anschlüsse (RJ-45) 0
Eingebauter Ethernet-Anschluss Nein
WLAN Nein
Speichermedium
Interne Speicherkapazität 1 GB
Integrierter Kartenleser Ja
Kompatible Speicherkarten microSDHC
Max. Speicherkartengröße 32 GB
Merkmale
Geräuschpegel - dB
HDCP -
Plug & Play Ja
Design
Produktfarbe Schwarz
Produkttyp Tragbarer Projektor
LED-Anzeigen Ja
Marktpositionierung Tragbar
Leistung
Energiequelle Wechselstrom/Batterie
Stromverbrauch (Standby) - W
Akku-/Batteriebetriebsdauer 1.5 h
Gewicht und Abmessungen
Gewicht 250 g
Breite 120 mm
Tiefe 70 mm
Höhe 30 mm
Lieferumfang
Fernbedienung enthalten Ja
Mitgelieferte Kabel AV,USB,VGA
Tragetasche Ja
Batterien enthalten Ja
Fernbedienungstyp IR
Software
Unterstützt Windows-Betriebssysteme Ja
Technische Details
Nachhaltigkeitszertifikate RoHS
Mehr anzeigen

Häufig gestellte Fragen

Nachfolgend finden Sie die am häufigsten gestellten Fragen zu Optoma Pico 320 .

Ist Ihre Frage nicht aufgeführt? Stellen Sie hier Ihre Frage