Parkside PDZ 276 A2 Bedienungsanleitung

Parkside PDZ 276 A2
7.5 · 1
PDF Bedienungsanleitung
 · 4 Seiten
Deutsch
BedienungsanleitungParkside PDZ 276 A2

ROTARY TOOL ACCESSORY

SET/// PDZ276A2

Introduction

We congratulate you on the purchase
of your new product. You have chosen a
high quality product. Familiarise yourself
with the product before using it for the first
time. In addition, please carefully refer to
the operating instructions and the safety
advice below. Only use the product as
instructed and only for the indicated field
of application. Keep these instructions in a
safe place. If you pass the product on to
anyone else, please ensure that you also
pass on all the documentation with it.
GB/IE/NIGB/IE/NIGB/IE/NI
GB/IE/NIGB/IE/NIGB/IE/NI GB/IE/NIGB/IE/NI
GB/IE/NI GB/IE/NI GB/IE/NI GB/IE/NI DK DKGB/IE/NI
GB/IE/NIGB/IE/NI GB/IE/NI GB/IE/NI
ROTARY TOOL ACCESSORY SET ///
PDZ276A2
Operation and safety notes
FINBORESLIBER- TILBEHØRSSÆT ///
PDZ276A2
Brugs- og sikkerhedsanvisninger
ACCESSOIRES POUR PERCEUSE-MEULEUSE DE
PRÉCISION /// PDZ 276 A2
Instructions d‘utilisation et consignes de sécurité
FIJBOORSLIJPMACHINE-TOEBEHORENSET ///
PDZ 276 A2
Bedienings- en veiligheidsinstructies
FEINBOHRSCHLEIFER-ZUBEHÖRSATZ ///
PDZ276 A2
Bedienungs- und Sicherheitshinweise
≤ 20000
min
-1
≤ 20000
min
-1
≤ 20000
min
-1
≤ 25000
min
-1
≤ 25000
min
-1
≤ 35000
min
-1
≤ 25000
min
-1
≤ 20000
min
-1
≤ 15000
min
-1
≤ 15000
min
-1
≤ 15000
min
-1
≤ 20000
min
-1
≤ 30000
min
-1
≤ 20000
min
-1
≤ 20000
min
-1
≤ 32000
min
-1
≤ 25000
min
-1
≤ 30000
min
-1
≤ 32000
min
-1

Intended use

This product is designed for drilling, milling,
engraving, polishing, cleaning, sand or
cutting wood, plastic or metal.
This product is not intended for commerical
or industrial use. No liability will be
assumed in case of improper use.

Description of parts and

features

1
3 x Sanding drum
1 x ø12 mm, 1 x ø9 mm, 1 x
ø6 mm
26
4 x Sanding flapwheel
2 x Sanding flapwheels (ø31 x
9 mm, grain: 80)
2 x Sanding flapwheels (ø15 x
15 mm, grain: 80)
1 x Instruction for use

General safety

instructions

KEEP ALL THE SAFETY ADVICE AND
INSTRUCTIONS IN A SAFE PLACE FOR
FUTURE REFERENCE!
Polishing, Derusting
Wire brush
12
,
brass brush
13
,
collet
8
Derusting
Rubber polishing
point
15
, arbor
3
, felt disc
4
,
polishing
paste
23
, collet
8
Various metals
and plastics, in
particular precious
metals
Cleaning
PP brush
11
, collet
8
e.g. cleaning
complex plastic
housings or the
area around a door
lock
Wire brush
12
, brass brush
13
,
collet
8
e.g. metal
7
9 x Precision drill (HSS=High
Speed Steel)
3 x ø3.2 mm, 3 x ø2.4 mm, 3 x
ø1.6 mm
8
3 x Collet (for rotating inserts)
1 x ø3.2 mm, 1 x ø2.4 mm, 1 x
ø1.6 mm
9
6 x Aluminium oxide grinding stone
(rust-coloured)
2 x Aluminium oxide grinding
stones, cylinder (ø15 x 9 mm)
2 x Aluminium oxide grinding
stones, cylinder (ø9 x 12 mm)
2 x Aluminium oxide grinding
stones, projectile (ø9 x 19 mm)
Check whether all of the parts are
correctly fitted. Use the open spanner
25
if necessary to tighten or loosen the
collet nut on power tools. If the product
is not correctly assembled there is a
danger of injury.
CAUTION! RISK OF
INJURY! Always wear
protective goggles when
working with the product.
Never exceed the specified maximum
rotation speed (see illustrations).

Cleaning and care

Use a soft and dry brush to clean the
tool.

Storage

All parts must be stored in the container
in which they were delivered to protect
them from external factors.
Always place the container’s plastic
insert in the container before replacing
the lid to ensure that all parts sit
securely.

Disposal

The packaging is made entirely of
recyclable materials, which you may
dispose of at local recycling facilities.
2
52 x Sanding band
18 x ø12 x 12 mm=9 x grain:
80,
9 x grain:120
18 x ø6 x 12 mm=9 x grain:
80,
9 x grain: 120
16 x ø9 x 12 mm=8 x grain:
80,
8 x grain: 120
3
1 x Arbor for felt disc
4
9 x Felt disc
2 x ø25 mm, 6 x ø12 mm, 1 x
ø9 mm
5
12 x Diamond grinding bit
1 x Diamond grinding bit,
cylinder (ø3 x 10 mm)
WARNING! DANGER OF
DEATH AND ACCIDENTS FOR
TODDLERS AND CHILDREN!
Never leave children unsupervised
with the packaging material. The
packaging material represents a danger
of suffocation. Children frequently
underestimate the dangers. Always
keep children away from the packaging
material.
Some of the supplied parts can be
swallowed. If a part is swallowed, seek
medical advice as soon as possible.
This product is not a toy. It does not
belong in the hands of children.
Children do not appreciate the dangers
associated with the product.
Grinding/ abrading
Sanding drum
1
,
sanding band
2
,
collet
8
, aluminium
oxide grinding stone
9
, silicon carbide
grinding stone
10
,
grinding
wheel
14
, sand
paper
17a
,
17b
,
sand paper support
18
, arbor
20
,
sanding flapwheel
26
Grinding of stone,
precise
tasks on hard
materials, such as
ceramics or alloy
steel
10
4 x Silicon carbide grinding stone
(blue grey)
2 x Silicon carbide grinding
stones, cylinder (ø19 x 5 mm)
2 x Silicon carbide grinding
stones, cylinder (ø10 x 3 mm)
11
3 x PP brush
1 x ø19 mm, 1 x ø15 mm, 1 x
ø4 mm
12
3 x Wire brush
1 x ø19 mm, 1 x ø15 mm, 1 x
ø4 mm
13
1 x Brass brush (ø19 mm)
14
20 x Grinding wheel
6 x Aluminium oxide grinding
wheels (ø19 mm, grain: 220)
(pink)
Parts may not be fitted to machines
whose rotational speed lies above the
maximum permitted rotational speed.
Rust discolouration or other signs of
chemical or mechanical change to the
parts can cause premature failure of
the parts.
All parts must be stored in the container
in which they were delivered to protect
them from the following factors:
1. High humidity, heat, water or other
liquids which could cause damage to
the parts;
2. Acids or vapours of acids, which could
cause damage;
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product.
Service
Service Great Britain
Tel.: 0800 404 7657
E-Mail: owim@lidl.co.uk
Service Ireland
Service Northern Ireland
Tel.: 1890 930 034
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off
peak))
E-Mail: owim@lidl.ie
1 x Diamond grinding bit,
cylinder (ø2.5 x 10 mm)
1 x Diamond grinding bit,
cylinder (ø2 x 10 mm)
1 x Diamond grinding bit,
cylindrical knob (ø3 x 10 mm)
2 x Diamond grinding bit, ball (1
x ø4 mm, 1x ø2 mm)
1 x Diamond grinding bit, flame
1 x Diamond grinding bit, cone
1 x Diamond grinding bit,
inverted cone
1 x Diamond grinding bit, flat
head
1 x Diamond grinding bit, point
1 x Diamond grinding bit, wire
6
2 x Diamond cutting disc (ø22 mm,
8 holes)
Children or persons who lack the
knowledge or experience to use the
device or whose physical, sensory or
intellectual capacities are limited must
never be allowed to use the product
without supervision or instruction by
a person responsible for their safety.
Children must never be allowed to play
with the device.
m CAUTION! RISK OF INJURY!
Do not use the product if you see it is
damaged in any way.
Unplug the appliance before fitting or
changing parts.
Cutting
Diamond cutting
disc
6
, collet
8
,
arbor
20
, cutting
disc
21
, fibreglass-
reinforced cutting
disc
22
Cutting metal,
plastic and
wood
Tip for use of the sanding drums
1
:
If the sanding belt
2
is slack, proceed as
follows:
Turn the screw on the head of the
sanding drum
1
in clockwise direction
with a crosshead screwdriver until the
sanding belt
2
is tight.
6 x Silicon carbide grinding
wheels (ø19 mm, grade: 180)
(blue-grey)
6 x Grinding wheels (ø19 mm,
grain: 120) (white)
2 x Rubber polishing wheels
(ø22 mm) (grey)
15
6 x Rubber polishing points
2 x Cylinder, 2 x projectile, 2 x
point
16
1 x Storage box (sand paper
17
)
17
80 x Sand paper
40 x Sand paper in storage box
(ø19 mm, grain: 220), (red)
17a
3. Temperatures that are so low that they
could lead to condensation when the
brushes are relocated to an area with
high temperatures;
4. Deformation of a part.

Use

m CAUTION! DANGER OF INJURY!
It is essential that you read the
operating instructions for the electrical
power tool before you start using the
tool set. If you do not observe this
advice it could lead to considerable
danger of injury.
40 x Sand paper in storage box
(ø19 mm, grain: 240), (black)
17b
18
1 x Sand paper support
19
1 x Storage box (cutting disc
21
)
20
2 x Arbor (cutting disc
21
/ grinding
wheel
14
/ sand paper
17b
)
1 x ø1.9 mm, 1 x ø2.2 mm
21
36 x Cutting disc (ø23 mm)
22
16 x Fibreglass-reinforced cutting
disc (ø31 mm)
23
1 x Polishing compound
24
1 x Grinding stone
25
1 x Open spanner
Selecting the appropriate
accessory
Drilling
Precision drill
7
,
collet
8
Drilling into wood
Milling
Diamond grinding
bit
5
, collet
8
Various tasks, e.g.
hollowing out,
gouging, shaping,
grooving or slotting
Engraving
Diamond grinding
bit
5
, collet
8
Marking, detailed
work
GB/IE/NI
GB/IE/NIGB/IE/NI

FINBORESLIBER- TILBEHØRSSÆT

/// PDZ276A2

Indledning

Hjerteligt tillykke med købet af deres nye
produkt. Du har besluttet dig for et produkt
af høj kvalitet. Gør Dem fortrolig med
apparatet inden første ibrugtagning. Læs
derfor den efterfølgende brugsvejledning
og sikkerhedsanvisningerne omhyggeligt.
Brug kun produktet som beskrevet og
kun til de angivne anvendelsesområder.
Opbevar denne vejlledning på et sikkert
sted. Hvis De giver produktet videre til
andre, skal alle dokumenter følge med.

Forskriftsmæssig anvendelse

Dette produkt er beregnet til at bore,
fræse, gravere, polere, rense, slibe eller
skære i træ, plastik eller metal.
Produktet må ikke anvendes til
erhvervsmæssige eller industrielle formål.
Ved ikke-forskriftsmæssig anvendelse
fralægges ethvert ansvar.

Beskrivelse af dele og

funktioner

1
3 x sliberuller
1 x ø12mm, 1 x ø9mm, 1 x
ø6mm
IAN 315823_1904
1 3
16 18
17a 17b
13 14
6
87
19 24 25
21 22 232012 15
2
4 5 9
10 11
26
18
1
3
2 4
14
/
17b
/
21
/
22
17a
17a
20

Sehen Sie sich hier kostenlos das Handbuch für Parkside PDZ 276 A2 an. Dieses Handbuch fällt unter die Kategorie nicht kategorisiert und wurde von 1 Personen mit einem Durchschnitt von 7.5 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Deutsch, Englisch. Haben Sie eine Frage zum Parkside PDZ 276 A2 oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage

Brauchen Sie Hilfe?

Haben Sie eine Frage zum Parkside und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Parkside -Besitzer, Ihnen eine gute Antwort zu geben.

Peter Ell • 27-8-2022Keine Kommentare

wie werden die einzelnen Fräser am Gerät befestigt

Diese Frage beantworten

Anzahl der Fragen: 1

Allgemeines
Parkside
PDZ 276 A2
nicht kategorisiert
4055334441896, 4056232853859
Deutsch, Englisch
Benutzerhandbuch (PDF)

Finden Sie die Antwort auf Ihre Frage nicht im Handbuch? Vielleicht finden Sie die Antwort auf Ihre Frage in den FAQs zu Parkside PDZ 276 A2 unten.

Ist das Handbuch der Parkside PDZ 276 A2 unter Deutsch verfügbar?

Ja, das Handbuch der Parkside PDZ 276 A2 ist unter Deutsch verfügbar.

Ist Ihre Frage nicht aufgeführt? Stellen Sie hier Ihre Frage

Keine Ergebnisse