Pyle PBT30M

Pyle PBT30M Bedienungsanleitung

(1)
  • 200.00 mm
    270.00 mm
    2
    5
    6
    Headset pictures..........................................................................................................1
    Charging the battery.....................................................................................................1
    Turning on the Headset.................................................................................................1
    Turning off the Headset.................................................................................................1
    Headset in Pairing Mode...............................................................................................2
    Establishing Bluetooth Link...........................................................................................3
    Answering incoming calls..............................................................................................3
    Transferring calls.........................................................................................................4
    Muting the microphone.................................................................................................4
    Ending calls.................................................................................................................4
    To make a new call using voice dial................................................................................4
    Redialing last dialed number.........................................................................................5
    Reject a call.................................................................................................................5
    Adjusting speaker volume.............................................................................................5
    To wear the headset.....................................................................................................5
    Low-battery indication..................................................................................................6
    Battery recharging........................................................................................................6
    LED Status..................................................................................................................7
    Voice Over Internet Protocol (VoIP) Application..............................................................8
    FCC Interference statement ........................................................................................9
    Declaration of Conformity..........................................................................................11
    Charging the battery
    Thank you for buying the new PBT30M Headset with Bluetooth wireless technology. Before
    first time use, it is important to charge the battery for 8 hours.
    Turning on the Headset
    While the Headset is powered down, press and hold S1 until blue LED turns on. A low tone
    followed by a high tone will indicate that the PBT30M is powered up. Afterward, blue LED
    will flash every 3 seconds.
    Turning off the Headset
    While the Headset is powered up, press and hold S1 until red LED turns on. A high tone
    followed by a low tone will indicate that the PBT30M is powered down.
    Microphone
    Speaker
    On/Off(S1)
    Volume Up (S2)
    Volume Down(S3)
    LED
    DC Socket
    1
    Redialing last dialed number (Mobile phones with Handsfree profiles only )
    To redial the last number, press and hold S3 until 4 tones are heard. It indicates the redial
    is active.
    Reject a call (Mobile phones with Handsfree profiles only )
    To reject a call at the time the PBT30M rings, press and hold S1 until you hear 2 tones.
    Adjusting Speaker Volume:
    When a call is ongoing, pressing and releasing S2 will increase the speaker volume and
    pressing and releasing S3 will decrease the speaker volume on the Headset. There is a
    key tone to indicate volume increase or decrease. However, a warning tone will be heard
    when the volume level reaches its maximum or minimum.
    To wear the headset
    Make sure the microphone is pointing towards your mouth.
    Transferring Calls (For Nokia 3650 or equivalent models)
    When you are in session, calls can be transferred from the Bluetooth phone to the HS and from
    the HS to the Bluetooth phone.
    To transfer a call from the Bluetooth phone to the HS: press S1 once, the call will be
    transferred to the HS.
    To transfer a call from HS to the Bluetooth phone, please follow the operating instructions of
    your phone.
    Muting the microphone
    To mute the microphone during an active call press both S2 and S3 buttons simultaneously for
    about a second and the microphone will be muted. A periodic beep tone will be heard when the
    mute function is active.
    To end the mute function: When the microphone is muted, press both S2 and S3 buttons
    simultaneously. Mute function is ended and the periodic beep tone will stop.
    Ending Calls
    While a call is in session on the Headset pressing S1 will disconnect the call. After the call is
    disconnected, the blue LED will flash normally again.
    To make a new call using voice dial
    Make sure the voice dialing function is set up in the mobile phone and it is within the range of
    the Headset. Press S1 on the PBT30M shortly. There is a beep tone on the headset.Then use
    your recorded voice commands ( eg. By saying the name of the person). The call will be
    connected in a few seconds.
    User Manual
    PBT30M
    ®
    Bluetooth Headset
    4
    3
    Headset in Pairing Mode
    Make sure the PBT30M is fully charged and the charging cable is disconnected from it before
    pairing starts. While the PBT30M is powered off, press and hold S1 until red and blue LEDs
    flashing alternately. It indicates that the Headset is in Pairing Mode.
    Follow the operating instructions for your Bluetooth mobile phone to start the pairing process.
    Typically, this has to be done by going to a setup or connect menu and then selecting the
    options to discover Bluetooth devices. Bluetooth may take several seconds to establish a
    connection.
    Your phone's display should indicate that it has found the “PBT30M” headset and asks if you
    want to pair it. You should confirm this. The phone's display would prompt you for a passkey
    or PIN. Enter a sequence of “0000.
    The headset LED will flash blue every 3 seconds, indicating successful pairing. Usually the
    phone will also ask whether you want to change the headset's name. We recommend to keep
    the default name PBT30M instead of changing it.
    If pairing does not occur as expected:Turn off both the headset and the phone and wait for 10
    seconds. Turn on the headset and phone again and repeat all steps from beginning. Pairing
    does authorize the devices like mobile phones and headsets with each other and only needs
    to be performed once.
    Establishing Bluetooth Link
    After successfully pairing the PBT30M and the mobile phone, you may need to establish a Bluetooth
    link between them according to the operation manual of your mobile phone. To establish the link, press
    S1 shortly. Use Nokia 6130i as an example, the mobile phone will show “Do you accept PBT30M
    request for connection?Select YES to establish the link. You are ready to make and answer calls on
    the Headset. For other phones, please follow the operation manual to establish the link. You are ready
    to make and answer calls on the Headset.
    Please note:
    If the headset is powered down, turning on the headset will auto reconnect the last used device. If the
    headset is disconnected but powered on, press S1 shortly to connect the link again. If there is
    abnormal loss of link happened (e.g. out of range), the headset will automatically try to reconnect the
    mobile phone several times.
    If the mobile phone cannot locate the network signal (e.g. out of reach) , alert tone will be heard every
    5 seconds in the headset.
    Not every mobile phone supports no network signal alert feature.
    If there is no Bluetooth connection for more than 1 hour, the headset will switch off automatically.
    Answering Incoming Calls
    When you wear the headset, an incoming call is present, the PBT30M headset will ring. Pressing S1
    will answer the call.
    Attention: Some phones put the Bluetooth connection into Standby Mode if it has not been used for
    some time. When there is phone call in, only the mobile phone rings and it will take a few seconds to
    transfer the call to headset. You have to wait until you hear the ring tone in headset. If you press S1 to
    take the call before you hear the ring tone in headset, the headset will try to establish Bluetooth
    connection. This will cause connection conflicts between mobile phone and headset.
    Low-battery indication
    The PBT30M LED will flash red instead of blue when the battery is low. There will also a
    short beep periodically. After this indication you still have up to 15 minutes talk time. When
    the battery level is too low, the Headset will automatically power off. It cannot be powered on
    again unless the charger is connected or the battery is sufficiently charged.
    Battery recharging
    To recharge the battery, put the headset on phone holder. During recharging, the LED
    shows a steady red light.
    When the battery is fully charged, the indicators of red light will be off .
    The achievable talk time and standby time for the PBT30M can vary with different Bluetooth
    mobile phones due to different implementation of power down modes.
    Keep the headset away from fire to avoid damage.
    (1) A/C charging (2) Car charging
    Note
    Material: 80g Woodfree Paper
    1
    2
    3
    4
    5
    6
    7
    8
    A
    B
    C
    D
    E
    A
    B
    C
    E
    1
    2
    3
    4
    5
    6
    7
    8
    D
    PART NO.:
    MCB-8127020-1A
    MODEL:
    8127
    DRAWN:
    Limingzan
    DATE:
    20071204
    PAPER SIZE:
    A3
    UNIT:
    MM
    SCALE:
    1:1
    DESCRIPTION:
    #User Manual For PYLE Logo
    In-Tech Electronics Ltd.
Pyle PBT30M

Brauchen Sie Hilfe?

Anzahl der Fragen: 0

Haben Sie eine Frage zum Pyle PBT30M oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je detaillierter Sie Ihr Problem und Ihre Frage angeben, desto einfacher können andere Pyle PBT30M-Eigentümer Ihre Frage richtig beantworten.

Sehen Sie sich hier kostenlos das Handbuch für Pyle PBT30M an. Dieses Handbuch fällt unter die Kategorie Kopfhörer und wurde von 1 Personen mit einem Durchschnitt von 6.7 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum Pyle PBT30M oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage

Pyle PBT30M-Spezifikationen

Allgemeines
Marke Pyle
Model PBT30M
Produkte Kopfhörer
EAN 68888888745
Sprache Englisch
Dateityp PDF
- Kabellos
- Monaural
- Schwarz
- im Ohr
- 10
- 2.0+EDR
- Im Ohr
- Lithium Polymer (LiPo)
- 6
- 100
- 45.97 x 15.49 x 10.16
- 7
- CE/FCC/BQB
-
- Kopfhörer
Gewicht und Abmessungen
Gewicht 7
Sonstige Funktionen
Abmessungen (BxTxH) 45.97 x 15.49 x 10.16
Batterie
Gesprächszeit 6h
Bereitschaftszeit 100h
Batterietechnologie Lithium Polymer (LiPo)
Leistungen
Zertifizierung CE/FCC/BQB
Produkttyp Kopfhörer
Produktfarbe Schwarz
Headset-Typ Monaural
Tragestil im Ohr
Anschlüsse und Schnittstellen
Bluetooth-Version 2.0+EDR
Kabellose Reichweite 10
Übertragungstechnik Kabellos
Bluetooth
Kopfhörer
Position Kopfhörerlautsprecher Im Ohr

Häufig gestellte Fragen

Nachfolgend finden Sie die am häufigsten gestellten Fragen zu Pyle PBT30M .

Ist Ihre Frage nicht aufgeführt? Stellen Sie hier Ihre Frage

Bedienungsanleitu.ng

Auf der Suche nach einer Bedienungsanleitung? Bedienungsanleitu.ng sorgt dafür, dass Sie in Windeseile die Bedienungsanleitung finden, die Sie suchen. In unserer Datenbank befinden sich mehr als 1 Million PDF Bedienungsanleitungen von über 10.000 Marken. Jeden Tag fügen wir die neuesten Bedienungsanleitungen hinzu, damit Sie jederzeit das Produkt finden, das Sie suchen. Es ist ganz einfach: Tippen Sie in der Suchleiste Markenname und Produkttyp ein und Sie können direkt die Bedienungsanleitung Ihrer Wahl gratis online einsehen.

Bedienungsanleitu.ng

© Copyright 2020 Bedienungsanleitu.ng. Alle Rechte vorbehalten.

Diese Website benutzen Cookies. Wenn Sie die Website weiter nutzen, stimmen Sie der Verwendung von Cookies zu.

Erfahren Sie mehr