Radial Engineering ProAV1 Bedienungsanleitung

Radial Engineering ProAV1
7.5 · 1
PDF Bedienungsanleitung
 · 2 Seiten
Englisch
BedienungsanleitungRadial Engineering ProAV1
97 8
INPUT PANEL
1. ¼” INPUT & THRU - input connection
for instruments and thru-put for on-stage
ampli er.
2. 3.5mm TRS - input connection for stereo
-10dB consumer audio electronics.
3. RCA INPUT - left and right input
connection for stereo -10dB consumer
audio electronics.
4. RCA THRU - left and right parallel thru-
put of signals connected to the ¼”, 3.5mm
TRS and RCA inputs.
5. -15dB PAD - reduces the input level
by 15dB to prevent overload from high
output devices.
6. XLR INPUT - this recessed switch
selects between the hi-Z and the XLR
inputs.
OUTPUT PANEL
7. XLR LINE INPUT - this XLR input is
speci cally designed to accept +4dB line-
level signals from balanced sources.
8. GROUND LIFT - disconnects pin-1 on
the XLR output connector to help reduce
noise caused by ground loops.
9. XLR OUTPUT - balanced, 600 ohm,
mic-level output is 100% transformer-
isolated and compatible with mic splitters
and console preamps.
CONSTRUCTION
10. BOOK-END DESIGN - 14 gauge steel
outer shell provides a protective zone for
the switches and connectors.
11. FULL BOTTOM PAD - neoprene foam
foot provides electrical isolation and plenty
of friction to stay put on hectic stages.
12. WELDED I-BEAM CASE - inner steel
enclosure is made extremely rigid with I-
beam pro le. Eliminates stress that could
torque the PC board and cause solder
joint failure.
13. MILITARY-GRADE - double-sided PCB
is bolted to steel standoffs for toughness.
14. RADIAL TRANSFORMER - linear freq.
response from 20Hz to 18kHz for natural
sound. Mu-metal shield to eliminate
electromagnetic interference.
15. ISOLATED CONNECTORS - are
made from extremely tough glass- lled
nylon for true electrical isolation from
chassis ground.

www.radialeng.com

ProAV1 Direct Box

Users Guide

True to the Music
ProAV1 SPECIFICATIONS
Frequency response 20Hz to 18kHz +/- .5dB
Total harmonic distortion 0.01% THD 20Hz to 20kHz
Input Unbalanced high-Z -10dB RCA, ¼” and 3.5mm TRS
Balanced low-Z +4dB XLR
Output Balanced 600-Ohm, mic-level, pin-2 hot
Input pad -15dB
Power requirement None, completely passive
Size 3.25” x 5” x 1.875”
Weight 1.6 lbs
1 62 3 5
10
Radial Engineering
1638 Kebet Way, Port Coquitlam BC V3C 5W9
Tel: 604-942-1001 Fax: 604-942-1010
email: info@radialeng.com
Radial Engineering is a division of C•TEC (JP CableTek Electronics Ltd.)
Radial ProAV1 users guide V1.0 - Part #: R870 1140 00
Subject to change without notice
ProAV1 User Guide
Radial Engineering
ProAV1 User Guide
Radial Engineering
RADIAL LIMITED THREE YEAR TRANSFERABLE
WARRANTY
Radial Engineering - a division of JP Cabletek Electronics Ltd. - warrants this
product to be free from defects in material and workmanship and will remedy
any such defects free of charge according to the terms of this warranty. Radial
Engineering will repair or replace at its option any defective component(s)
of this product, excluding the nish, the bottom foam pad and wear and tear
from normal use, for a period of three (3) years from the original date of
purchase. In the event that a particular product is no longer available, Radial
Engineering reserves the right to replace the product with a similar product of
equal or greater value. To make a request or claim under this limited warranty,
the product must be returned prepaid in the original shipping container (or
equivalent) to Radial Engineering or to an authorized repair centre and
you must assume the risk of loss or damage. A copy of the original invoice
showing date of purchase and the dealer name must accompany any request
for work to be performed under this limited warranty. This limited warranty
shall not apply if the product has been damaged due to abuse, misuse,
misapplication, accident or as a result of service or modi cation by any other
than an authorized repair centre.
THERE ARE NO EXPRESSED WARRANTIES OTHER THAN THOSE
ON THE FACE HEREOF AND DESCRIBED ABOVE. NO WARRANTIES,
WHETHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO,
ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, SHALL EXTEND BEYOND THE RESPECTIVE
WARRANTY PERIOD DESCRIBED ABOVE OF THREE YEARS. RADIAL
ENGINEERING SHALL NOT BE RESPONSIBLE OR LIABLE FOR ANY
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS
ARISING FROM THE USE OF THIS PRODUCT. THIS WARRANTY GIVES
YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS, WHICH MAY VARY DEPENDING ON WHERE YOU LIVE.
4
11
12
13
14
15
15
6
True to the Music

Sehen Sie sich hier kostenlos das Handbuch für Radial Engineering ProAV1 an. Dieses Handbuch fällt unter die Kategorie Nicht kategorisiert und wurde von 1 Personen mit einem Durchschnitt von 7.5 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum Radial Engineering ProAV1 oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage

Brauchen Sie Hilfe?

Haben Sie eine Frage zum Radial Engineering und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Radial Engineering -Besitzer, Ihnen eine gute Antwort zu geben.

Anzahl der Fragen: 0

Allgemeines
Radial Engineering
ProAV1
Nicht kategorisiert
Englisch
Benutzerhandbuch (PDF)

Finden Sie die Antwort auf Ihre Frage nicht im Handbuch? Vielleicht finden Sie die Antwort auf Ihre Frage in den FAQs zu Radial Engineering ProAV1 unten.

Ist Ihre Frage nicht aufgeführt? Stellen Sie hier Ihre Frage

Keine Ergebnisse

Bedienungsanleitu.ng

© Copyright 2023 Bedienungsanleitu.ng. Alle Rechte vorbehalten.