REVO RU81B6G-2T Bedienungsanleitung
7.5 · 1
Bedienungsanleitung
Sehen Sie sich hier kostenlos das Handbuch für REVO RU81B6G-2T an. Dieses Handbuch fällt unter die Kategorie Sicherheitskameras und wurde von 1 Personen mit einem Durchschnitt von 7.5 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum REVO RU81B6G-2T oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage
Inhaltsangabe
- 01-Front cover
- 02-Title page
- 03-Body
- Preface
- Part I Local Operations
- 1 Before You Begin
- 2 Initial Configuration
- Preparation
- Startup Wizard
- 1. Choose a language for the system and then click OK.
- 2. Enable or disable the startup wizard as needed and then click Next.
- 3. Enable or disable the Auto-Add IP Camera function as needed and then click Next.
- 4. Enter the default admin password 123456 and then click Next.
- 5. Select a time zone, and then complete the date and time settings. Review the settings and then click Next.
- 6. Set the IP address, subnet mask and default gateway for your NVR. Use the default settings for other parameters unless a modification is necessary. Click Next when you are ready.
- 7. Click Search. The discovered IP devices are listed. Select the desired IP device and then click Add. After the IP device is added successfully, click Next.
- 8. A 24×7 recording schedule is enabled for all cameras by default, but you may change the recording type for a camera as needed. Click OK after you have completed the configuration.
- 1. Choose a language for the system and then click OK.
- Preparation
- 3 Preview
- Status Icons in the Preview Window
- Preview Window Toolbar
- Shortcut Menu in Preview Window
- Example of Auto-Switch Operation
- 1. Right-click anywhere in the preview window, and then click Multi-Screen > 4 Screens. Four windows are displayed.
- 2. Right-click anywhere in the preview window and then click Start Auto-Switch. Auto-switch starts to display four windows on the first screen and then the fifth window on the second screen at the set interval.
- 1. Right-click anywhere in the preview window, and then click Multi-Screen > 4 Screens. Four windows are displayed.
- Zoom
- Image Configuration
- Preview Configuration
- Status Icons in the Preview Window
- 4 Channel Configuration
- Channel Management
- OSD Configuration
- 1. Click Menu > Camera > OSD.
- 2. Select the desired camera and enter a name for the camera.
- 3. Configure OSD by selecting the desired date and time formats and enabling time and/or name display. To change the OSD position on the screen, use the mouse to drag it in the preview window on the left.
- 4. Click Apply to complete the configuration.
- 1. Click Menu > Camera > OSD.
- Image Configuration
- Privacy Mask Configuration
- 5 PTZ Control
- Using the PTZ Toolbar
- Configuring and Calling a Preset
- Configuring and Calling a Patrol Route
- 1. Click the desired preview window and then click / on the toolbar.
- 2. Click Set. The PTZ Management window is displayed.
- 3. Click / to add a keypoint. In the Preset Configuration window, select the desired preset, set the duration (length of time the camera dwells on the preset) and the rotation speed as required, and then click OK. Repeat this step to add all the key p...
- 4. Click / for the desired patrol route to start patrol. To stop patrol, click /.
- 1. Click the desired preview window and then click / on the toolbar.
- 6 Recording
- Encoding Settings
- Scheduled Recording
- Motion Detection Recording
- 1. Click Menu > Alarm > Motion.
- 2. Select the desired camera, and then select the check box to enable motion detection.
- 3. Click and drag the mouse to specify a motion detection area. Adjust detection sensitivity by dragging the slider.
- 4. Configure motion detection recording: click / right to Trigger Actions, click the Recording tab, select the desired camera, and then click OK.
- 5. Set a recording schedule under Menu > Storage > Recording. For the detailed steps, see Scheduled Recording. Make sure Recording Type is set to Motion. After being set, the recording schedule appears in green color that specifically stands for motio...
- 1. Click Menu > Alarm > Motion.
- Alarm Triggered Recording
- 1. Click Menu > Alarm > Input/Output.
- 2. Configure alarm input: select the desired camera, click /, select Enable, select a trigger mode, and then click OK.
- 3. Configure alarm triggered recording: click / right to Trigger Actions, click the Recording tab, select the desired camera, and then click OK.
- 4. Set a recording schedule under Menu > Storage > Recording. For the detailed steps, see Scheduled Recording. Make sure Recording Type is set to Alarm. After being set, the recording schedule appears in red color that specifically stands for alarm-tr...
- 1. Click Menu > Alarm > Input/Output.
- Manual Recording
- Other Recording Types
- Disk Management
- 7 Playback
- Instant Playback
- Playback Toolbar
- Playback by Camera and Date
- Playback in Corridor Mode
- Playback by Tag
- Playback by Event
- Playback by Smart Search
- 1. In the playback window, select Smart from the drop-down list in the upper left corner.
- 2. Click / for the desired camera to start smart playback.
- 3. Click /. The smart search window is displayed. By default, the full screen is the smart search area.
- 4. Set smart search rules.
- 5. Click / to start.
- 1. In the playback window, select Smart from the drop-down list in the upper left corner.
- Playback by External File
- File Management
- 8 Backup
- Recording Backup
- Normal Backup
- 1. Click Menu > Backup > Normal.
- 2. Set search conditions and then click Search. Search results are displayed.
- 3. Select the desired recording(s) and then click Backup.
- 4. Select a destination in the USB storage device and then click Backup. The recording(s) will be saved to the specified directory.
- 1. Click Menu > Backup > Normal.
- Video Clip Backup
- 1. Open the playback window. For the detailed steps, see Playback.
- 2. After playback starts, click / and / on the playback toolbar to clip videos.
- 3. Click / and then click the Video Clip tab to view video clips.
- 4. Select the desired video clip(s) and then click Backup.
- 5. Select a destination in the USB storage device and then click Backup. The selected video clips are saved to the specified directory.
- 1. Open the playback window. For the detailed steps, see Playback.
- Image Backup
- 9 Alarm
- Alarm Input and Output
- Alarm Input
- 1. Click Menu > Alarm > Input/Output.
- 2. Click / for the desired camera, select Enable, select a trigger mode as needed, and then click OK.
- 3. Click / right to Trigger Actions and then configure action(s) to trigger. For more details, see Alarm-Triggered Actions.
- 4. Click / right to Arming Schedule and set an arming schedule as needed.
- 1. Click Menu > Alarm > Input/Output.
- Alarm Output
- Motion Detection
- 1. Click Menu > Alarm > Motion.
- 3. Use the mouse to draw a detection area, and drag the slider to set detection sensitivity.
- 4. Click / right to Trigger Actions and configure action(s) to trigger. For the detailed steps to configure actions, see Alarm-Triggered Actions.
- 5. Click / right to Arming Schedule and then set an arming schedule as needed.
- 6. Click Apply to complete the configuration.
- 1. Click Menu > Alarm > Motion.
- Tampering Detection
- 1. Click Menu > Alarm > Tampering.
- 3. Click / right to Trigger Actions and configure action(s) to trigger. For the detailed steps to configure actions, see Alarm-Triggered Actions.
- 4. Click / right to Arming Schedule and then set an arming schedule as needed.
- 5. Click Apply to complete the configuration.
- 1. Click Menu > Alarm > Tampering.
- Video Loss
- Alert
- Alarm-Triggered Actions
- 10 Network Configuration
- Basic Configuration
- PPPoE
- MyCloud
- DDNS
- Port
- Port Mapping
- 1. Click Menu > System > Network > Port Mapping.
- 2. UPnP is enabled by default. Select the desired mapping type from the drop-down list. To map ports manually, select Manual and then set external ports for the router.
- 3. Click Refresh and check that Active is displayed for these ports in the Status column.
- 4. Click Apply to complete the configuration.
- 1. Click Menu > System > Network > Port Mapping.
- IP Control
- 11 System Configuration
- Basic Configuration
- Time Configuration
- 1. Click Menu > System > Time > Time.
- 2. Select the correct time zone, and then set date and time formats and the system time.
- 3. To use Network Time Protocol (NTP), enable NTP by selecting the check box, and then set the IP address and port number of the NTP server and an update interval.
- 4. Click Apply to complete the configuration.
- 1. Click Menu > System > Time > Time.
- DST Configuration
- Serial Port Configuration
- User Configuration
- 12 System Maintenance
- 13 Shutdown
- Part II Web-Based Operations
- 1 Before You Begin
- 2 Login
- 3 Live View
- 4 Playback
- 5 Configuration
- Appendix A Technical Specifications
- Appendix B Acronyms
- Preface
REVO RU81B6G-2T-Spezifikationen
Nachfolgend finden Sie die Produktspezifikationen und die manuellen Spezifikationen zu REVO RU81B6G-2T.
Allgemeines
| Marke | REVO |
| Model | RU81B6G-2T |
| Produkte | Sicherheitskamera |
| EAN | 0812237018983, 0812237019010, 0812237019157, 0812237019164, 0812237019171 |
| Sprache | Englisch |
| Dateityp | Benutzerhandbuch (PDF) |
Häufig gestellte Fragen
Finden Sie die Antwort auf Ihre Frage nicht im Handbuch? Vielleicht finden Sie die Antwort auf Ihre Frage in den FAQs zu REVO RU81B6G-2T unten.
Was ist ein Megapixel?
Die Anzahl der Megapixel gibt an, wie viele Pixel sich im Sensor befinden. 1 Megapixel entspricht 1 Million Pixel. Je mehr Pixel vorhanden sind, desto höher ist die potenzielle Bildqualität.
Wofür steht die Abkürzung 'MP'?
MP steht für MegaPixel.
Ist das Handbuch der REVO RU81B6G-2T unter Deutsch verfügbar?
Leider haben wir kein Handbuch für REVO RU81B6G-2T in Deutsch verfügbar. Dieses Handbuch ist erhältlich in Englisch.
Ist Ihre Frage nicht aufgeführt? Stellen Sie hier Ihre Frage
Keine Ergebnisse
Brauchen Sie Hilfe?
Haben Sie eine Frage zum REVO RU81B6G-2T und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere REVO RU81B6G-2T-Besitzer, Ihnen eine gute Antwort zu geben.
Anzahl der Fragen: 0