ways be used and installed as described in these instructions.
If you have any further questions regarding its use, please feel free to contact us:
BRITAX RÖMER
Kindersicherheit GmbH
Theodor-Heuss-Straße 9
D-89340 Leipheim
Germany
T.: +49 (0) 8221 3670 -199
F.: +49 (0) 8221 3670 -210
E.: service.de@britax.com
www.britax.com
BRITAX EXCELSIOR
LIMITED
1 Churchill Way West
Andover
Hampshire SP10 3UW
United Kingdom
T.: +44 (0) 1264 333343
F.: +44 (0) 1264 334146
E.: service.uk@britax.com
www.britax.com
These instructions use the following symbols stated below:
SymbolKeywordExplanation
DANGER!Risk of severe personal injury
WARNING!Risk of minor personal injury
CAUTION!Risk of material damage
TIP:Useful notes
Instructions that follow a set sequence are numbered.
Example:
1. Press the button...
21
22
Belt guide colours
For better differentiation, the two vehicle seat
belts are highlighted in different colours. The di-
agonal seat belt
21
in dark red and the lap belt
22
in bright red. The colour of the belt guides
on the child safety seat follows the same colour
scheme.
4. CARE AND MAINTENANCE
3. CERTIFICATION
/ USAGE
PAGE I
5. DISASSEMBLY AND DISPOSAL
1. PRODUCT OVERVIEW
DISPOSAL:Please observe the waste disposal regulations in your country..
Disposal of packagingContainer for cardboard boxes
Seat coverResidual waste, thermal utilisation
Plastic partsAccording to the labelling in the
corresponding container
Metal partsContainer for metals
Belt strapsContainer for polyester
Buckle and tongueResidual waste
Batteries Container for batteries
REMOVAL:UNFASTENING YOUR CHILD:
1. To unfasten your child, press the red release button of the 5-Point harness
buckle
12
.
1. Unbuckle the vehicle belt buckle
20
and loosen the harness straps.
2. Unhook the diagonal belt section
21
from the upper belt guide
01
.
3. To open the shell: push one of the grey release buttons
03
and at the
same time pull the seat shell
02
as far forward as possible.
4. Remove the diagonal
21
and the lap belt sections
22
from the light red
lower belt guides
04
.
5. Hold the seat shell
02
with one hand while pulling the grey adjustment
lever
05
forward with the other hand.
6. To close the shell: tip the seat shell
02
against the seat base
06
over both
engagement positions.
WARNING! To avoid injuries take your hand away from the grey adjust-
ment lever
05
, as soon as getting over the two engagement positions.
7. Push the seat shell
02
with both hands against the seat base
06
until it is
fully engaged.
BRITAX RÖMER Child safety seat
Testing and certication
In accordance with ECE* R 44/04
*ECE = European Standard for Child Safety Equipment
GroupBody weight
KING II / ATS / LS
I9 to 18 kg
The child safety seat has been designed, tested and certied according to the re-
quirements of the European Standard for Child Safety Equipment (ECE R 44/04).
The seal of approval E (in a circle) and the approval number are located on the
orange approval label (sticker on the child safety seat)
.
DANGER! This approval will be invalidated if you make any modications to
the child safety seat. Only the manufacturer is permitted to make
modications to the child safety seat.
DANGER! Never secure your child or the child safety seat with a 2-point belt.
If you secure your child in the child seat with only a 2-point belt,
then in the event of an accident this may cause serious injuries to
your child, possibly resulting in death.
Please observe the instructions for using children’s restraining systems in the operating
instructions of your vehicle. The seat can only be used in vehicles with 3-point retractor safety-
belts
2)
.
Please nd the information on the seats approved for child safety seats of the weight classes 9 to
18 kg in the operating instructions of your vehicle.
You can use your child safety seat as follows:
In the direction of travelyes
Against the direction of travelno
1)
with 2-point beltno
with 3-point reractor safety belt
2)
yes
on front passenger seatyes
3)
on outer rear seatyes
on centre rear seat (with 3-point
belt
2)
)
yes
4)
1) Use is permitted on a rearward-facing vehicle seat (e.g. in a van or minibus) only
if the vehicle seat is also approved for use by adults. The seat may not be in the area of effect
of an airbag.
2) The seat is only compatible with 3-point retractor type safety-belts, approved to ECE Reg
No. 16 or other equivalent standards.
3) If there is a front airbag: Slide the vehicle seat a long way back and refer to any instructions
in vehicle owner’s manual.
4) Cannot be used if the vehicle seat is equipped with only a 2-point belt.
9 - 18 kg
Removing the cover
Loosen the harness straps as far as possible.
1.Open the harness buckle
12
(press red button).
2.Remove the cover of the headrest
09
.
3.Open the poppers
29
on the left and right side of the
rear part of the cover.
4.Unhook the elastic seam of the cover under the edge of
the seat shell.
TIP: Start at the sides of the seat shell.
5.Pull the cover up and over the bezel of the strap adjuster.
6.Feed out the harness buckle
12
and the end of the strap
from the cover.
7.Pull the cover upwards and remove it over the headrest
09
.
The cover can now be washed. Please observe the
instructions on the washing label of the cover:
Re-tting the cover
Proceed in reverse order to put on the cover.
09
29
12
Please ensure that you only use the original BRITAX RÖMER replacement seat
covers, as the seat cover is an integral part of the child safety seat and fulls im-
portant functions to ensure the smooth operation of the system. Replacement seat
covers are available from your dealer.
• The cover can be removed and washed using the delicates programme of the
washing machine (30°C). Please observe the instructions on the washing label
of the cover.
• The plastic parts can be cleaned with a damp cloth. Do not use any caustic
cleaning agents (such as solvents).
DANGER! The child seat must not be used without the seat cover.
Care for the harness buckle
It is vital for the safety of your child that the harness buckle works correctly. Malfunctions
of the harness buckle are usually caused by accumulations of dirt or foreign bodies.
Malfunctions include the following:
• The buckle latches are ejected only slowly when the red release button is pressed.
• The buckle latches will no longer lock home (i.e. they are ejected again if you try to push
them in).
• The buckle latches engage without an audible “click“.
• The buckle latches are difcult to insert (you feel resistance).
• The buckle only opens if extreme force is applied.
Remedy:
wash out the harness buckle so that it functions properly once again.
25
12
12
27
26
Cleaning the harness buckle
1.Open the harness buckle
12
(press the red button).
2.Adjust the seat shell
02
to the upright seating
position.
3.Open the Velcro fastener on the crotch pad
25
and
remove it and retain it.
4.Grasp below the seating area the metal plate
26
which keeps the buckle
12
at the seat base and
turn it into a vertical position.
5.Slide the metal plate
26
through the slot
27
.
6.Soak the harness buckle
12
in warm water with
dishwashing liquid for at least an hour.
7.Rinse and dry the harness buckle
12
thoroughly.
8.Slide the metal plate
26
edgewise through the slot
27
in the cover and the seat base.
9.Rotate the metal plate
26
90°
DANGER! Pull the harness buckle
12
rmly to ensure
that it is securely fastened.
10.Insert the crotch pad
25
through the slot
27
and
secure the Velcro fastener.
Cleaning the occupant sensor
1.
Fold the lower part of the cover updwards.
2. Remove dirt and dust in the area of the occupant sensor
28
with a vacuum cleaner.
DANGER! The occupant sensor
28
must not come in
contact with water.
28
Sehen Sie sich hier kostenlos das Handbuch für Römer KING II LS an. Dieses Handbuch fällt unter die Kategorie Autositze und wurde von 1 Personen mit einem Durchschnitt von 7.5 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum Römer KING II LS oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage
Brauchen Sie Hilfe?
Haben Sie eine Frage zum Römer und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Römer -Besitzer, Ihnen eine gute Antwort zu geben.
Finden Sie die Antwort auf Ihre Frage nicht im Handbuch? Vielleicht finden Sie die Antwort auf Ihre Frage in den FAQs zu Römer KING II LS unten.
Wie schwer ist das Römer KING II LS?
Das Römer KING II LS hat ein Gewicht von 10300 g.
Ist es für ein Baby sicher, in einem Autositz zu schlafen?
Nein, das Baby könnte ersticken. Wenn ein Baby im Autositz einschläft, sollte das Baby aus dem {Product} genommen und in eine Wiege gelegt werden. Nehmen Sie das Baby nach dem Einschlafen heraus und legen Sie es so schnell wie möglich in seine eigene Wiege.
Braucht mein zweijähriges Kind einen Autositz im Flugzeug?
Nein, Sie können ein Kind während des Fluges bis zu 24 Monate auf dem Schoß halten.
Was ist der sicherste Ort für einen Autositz?
Der sicherste Platz für einen Autositz befindet sich in der Mitte des Rücksitzes, so dass ein ausreichender Abstand zu den Airbags besteht.
Wie hoch ist das Römer KING II LS?
Das Römer KING II LS hat eine Höhe von 670 mm.
Wie breit ist das Römer KING II LS?
Das Römer KING II LS hat eine Breite von 450 mm.
Wie tief ist das Römer KING II LS?
Das Römer KING II LS hat eine Tiefe von 540 mm.
Ist das Handbuch der Römer KING II LS unter Deutsch verfügbar?
Leider haben wir kein Handbuch für Römer KING II LS in Deutsch verfügbar. Dieses Handbuch ist erhältlich in Englisch.
Brauchen Sie Hilfe?
Haben Sie eine Frage zum Römer und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Römer -Besitzer, Ihnen eine gute Antwort zu geben.
Anzahl der Fragen: 0