Make sure the Unit is connected to Antenna or Cable.
1
Press MENU and use HI to select Setup, then press OK.
Antenna
Add channels
Channel list
Autoprogram
USB
Language
Features
Setup
Sound
Picture
2
Adjust the following items.
Autoprogram
Be sure the RF cable is correctly connected to this Unit and you are
registered with your Cable TV provider when you Install Cable channels.
1
Use HI to Select Autoprogram, then press OK.
●
If you run Autoprogram when you have Locked Channels, a
Message appears asking to enter your PIN. Enter your Child Lock
PIN in order to Complete the Installation. (Default PIN code is 0,
0, 0, 0.) You need to reset or set the Channel Lock again after the
Installation.
2
Use HI to Select an appropriate Option, then press OK.
–
When Antenna is selected, the TV Detects Any Off-the-Air
Antenna Signals. It searches for ATSC (Digital) and NTSC
(Analog) Channels available in your Area.
–
When Cable is selected, the TV detects signals supplied by
Cable. It searches for DTV, Analog TV and Cable channels
available in your area.
Cable
Antenna
Back
ANTENNA IN
Or
Cable
Antenna
Select your signal source.
Language
Features
USB
Setup
Sound
Picture
####
than 20 minutes to complete.
Auto programming may take more
Auto program will rescan all channels.
Exit
6 ch
Analog channels
10 ch
Digital channels
75%
to complete.
Auto programming may take more than 20 minutes
channels.
Please wait while the system is scanning for
Autoprogram
●
When the Scanning and Memorizing of Available Channels is
Completed, the Lowest Memorized Channel will be Displayed.
Note(s)
●
After setting Autoprogram, using CH + / – skips unavailable channels Automatically.
●
If you are not receiving a signal from your Cable service, contact the Cable provider.
●
If you press B or MENU during Autoprogram, the Setup of TV channels will be Cancelled.
●
Even if Autoprogram is completed, the channel setting will be lost if the AC Power Cord is
unplugged before the Unit goes into Standby mode by pressing B.
●
The PIN Code will be required Once you set a PIN code in the Child and Ratings Lock. L
p. 25
●
If you want to change your PIN code, follow the instruction for Change PIN. L p. 27
Channel list
The channels selected in the Channellist can be skipped when selecting
the channels using CH + / –.
These channels can still be selected with the NUMBER keys.
1
Use HI to select Channel list, then press OK.
2
Use HI to select the channel you want to remove, then press OK.
DTV
DTV
DTV
11.1
11.2
11.3
Back
Watch / Skip
Ch Select
key selection.
Highlight channels for Ch Up/Down
USB
Language
Features
Setup
Sound
Picture
●
The channel display for the removed channel darkens. You will not
be able to select the channel again using CH + / –.
●
To reactivate a removed channel, use HI and press OK. The
registered channels are highlighted.
●
When you remove a main channel, its subchannels are removed
as well.
Note(s)
●
The channel with DTV indicated on the display is Digital TV (ATSC). Otherwise the channel
is Analog TV (NTSC).
22 .English
Continued on next page.
Sehen Sie sich hier kostenlos das Handbuch für Sanyo FW32D06F an. Dieses Handbuch fällt unter die Kategorie fernseher und wurde von 17 Personen mit einem Durchschnitt von 8.9 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum Sanyo FW32D06F oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage
Haben Sie eine Frage zum Sanyo und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Sanyo -Besitzer, Ihnen eine gute Antwort zu geben.
Finden Sie die Antwort auf Ihre Frage nicht im Handbuch? Vielleicht finden Sie die Antwort auf Ihre Frage in den FAQs zu Sanyo FW32D06F unten.
Was ist der beste Betrachtungsabstand für meinen Sanyo Fernseher?
Was ist der beste Betrachtungsabstand für meinen Sanyo Fernseher? Der ideale Betrachtungsabstand für Ihr {brand-} Fernsehgerät hängt von der Bildschirmgröße ab. Als Faustregel können Sie annehmen, dass das 2,4-fache der Bildschirmdiagonale der ideale Betrachtungsabstand ist.
Mein Fernseher empfängt kein Signal mehr, was nun?
Wenn Ihr Fernseher kein Signal hat, können Sie Folgendes überprüfen: - Überprüfen Sie, ob Ihr Fernseher auf die richtige Quelle eingestellt ist. - Überprüfen Sie, ob Ihr TV-Receiver über den HDMI- oder SCART-Eingang richtig angeschlossen ist.
Welche Bildschirmabmessungen hat mein fernseher?
Die Größe Ihres fernseher wird normalerweise in Zoll angegeben, 1 Zoll entspricht 2,54 Zentimetern. Die Größe ist die diagonale Breite Ihres fernseher, der Bildschirm wird also von links unten nach rechts oben gemessen.
Was ist HDMI?
HDMI steht für High-Definition Multimedia Interface. Ein HDMI-Kabel dient zur Weitergabe von Audio- und Videosignalen zwischen Geräten.
Können Bluetooth-Geräte verschiedener Marken miteinander verbunden werden?
Ja, Bluetooth ist eine universelle Methode, mit der sichergestellt wird, dass verschiedene mit Bluetooth ausgestattete Geräte eine Verbindung miteinander herstellen können.
Ist das Handbuch der Sanyo FW32D06F unter Deutsch verfügbar?
Leider haben wir kein Handbuch für Sanyo FW32D06F in Deutsch verfügbar. Dieses Handbuch ist erhältlich in Englisch.
Brauchen Sie Hilfe?
Haben Sie eine Frage zum Sanyo und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Sanyo -Besitzer, Ihnen eine gute Antwort zu geben.
Anzahl der Fragen: 0