Sanyo FW32D06F Bedienungsanleitung

7 Useful tips

Question Answer

My Remote Control does

not work.

What should I do?

Check the Antenna or Cable Connection to the Main Unit.

Check the Batteries on the Remote Control.

Re-insert or replace the AAA Batteries with their Polarities (+/–) as indicated on the Remote Control Battery area.

Check if there is an obstacle between the infrared sensor window and the Remote Control.

If okay, then possible Infrared Sensor trouble.

Aim the Remote Control directly at the infrared sensor window on the front of the Unit.

Reduce the distance to the Unit.

When there is an infrared-equipped device such as PC near this Unit, it may interrupt the Remote Control signal on this

Off the infrared communication function.

How come the Initial Setup

appears every time I Turn

On this Unit?

Connect the RF Coaxial Cable directly to this Unit and run the Initial Setup.

Make sure to complete the Initial Setup before the Unit goes into Standby mode.

Why can I not watch some

RF signal TV Programs?

Autoprogram must be completed when you Set Up the Unit for the First time or Move it to a location where previously

unavailable channels are broadcast.

The selected channel may not be broadcasting.

Autoprogram. L p. 22

The Unit requires some kind of Antenna Input. An indoor Antenna (Digital or VHF / UHF), an External Antenna (Digital or

VHF / UHF) or an RF Coaxial Cable from your wall Cable or Set-top Box needs to be plugged into the Unit.

How come there is no

image from the Connected

External Devices?

Check the Antenna, Cable or other Input Connection to the Unit.

When using the Component Video Connection check that the Green (Y), Blue (Pb/Cb) and Red (Pr/Cr) connectors are

connected to their corresponding colored jacks on the Unit.

When I enter a channel

number, why does it

change Automatically?

Many Digital channels have alternate channel numbers. The Unit changes the numbers Automatically to the ones

signifying the Broadcasting Station's channel number. These basic numbers used for the previous Analog Broadcasts.

(e.g., Input Digital ch# 30 Automatically changes to Digital ch# 8.1)

Why are captions not

displayed Entirely?

Or why are captions

delayed behind the dialog?

Closed Captions that are delayed a few seconds behind the actual dialog are common for Live broadcasts. Most

captioning production companies can display a dialog to maximum of 220 words per minute. If a dialog exceeds that

rate, selective editing is used to insure that the Closed Captions remain up-to date with the current TV screen dialog.

How can I set the clock?

There is No clock function on this Unit.

My PIN code no longer

works, how can I change

the Child Lock setting?

32 .English

Continued on next page.