Sonnet G10E-SFP-1X-E3 Bedienungsanleitung

Sonnet G10E-SFP-1X-E3
  • Anzahl Seiten: 2
  • Dateityp: PDF

Quick Start Guide

You Should Have
The following items should be included in your product package:
• One Solo10G SFP+ PCIe Card
• One additional mounting bracket
• 10GBASE-SR (short-range) SFP+ transceiver
The following items may be required for installation:
• Medium Phillips screwdriver
Computer Compatibility
Mac Pro
(Mid 2010 or newer), PC desktop, or server with full-
height or low-profile PCIe slots
OS Compatibility
• macOS
10.13.6+ (macOS Mojave compatible)
• Windows
10, 8, 7; Server 2016, 2012, 2008
• Linux
Thunderbolt™ Compatibility
, Windows, or Linux computer with a Thunderbolt port via a
Thunderbolt-to-PCIe Card Expansion System
Driver Information
For Mac users, the drivers that enable the Solo10G SFP+ PCIe Card
to work in your computer or Thunderbolt expansion chassis are
installed as part of macOS 10.13.6 and later; the Sonnet card is ready
to be used when you power on your computer.
For Windows users, please go to
kb.php, click the Computer Cards link, and then the PCIe Cards link.
Locate and click Solo10G SFP+ PCIe Card link, and then click the
Driver link. Locate, download, and install the appropriate drivers.
For Linux users, the drivers that enable the Solo10G SFP+ card to work
with Linux are installed as part of the Linux Kernel 5.0 and later. For
earlier versions, please go to,
click the Computer Cards link, and then the PCIe Cards link. Locate
and click the Solo10G SFP+ PCIe Card link, and then click the Driver
link. Locate, download, and install the appropriate drivers.
Installation Preparation
Sonnet strongly recommends that you read the section in your
computer’s user manual that addresses PCI card installation, prior to
installing the Presto card into your system.
Card and Transceiver Installation Steps
1. Shut down your computer or Thunderbolt-to-PCIe card
expansion system and disconnect it from its power source, and
then open it to access the expansion card area (PCIe slots); refer
to the user’s manual for specific information.
2. Locate an available x4 (4-lane) or larger PCI Express slot and
then remove its access cover.
3. Remove the Sonnet card from its packaging, and then install it
into the PCI Express slot; make sure the card is firmly seated
and secured.
4. Close your computer or expansion system, and then reconnect
it to its power source. If the card is installed in an expansion
system, also connect the Thunderbolt cable between the
Thunderbolt ports on the system and computer.
5. Insert the included 10GBASE-SR transceiver into the card’s SFP+
6. Connect a cable between the transceiver in the Sonnet card and
in the switch or device.




10 Gigabit Ethernet PCI Express
3.0 Adapter Card With 10GBASE-SR (Short-Range) SFP+ Transceiver
©2019 Sonnet Technologies, Inc. All rights reserved. Sonnet, the Sonnet logotype, Presto and Solo10G are trademarks of Sonnet
Technologies, Inc. Mac, the Mac logo, Mac Pro, and macOS are trademarks of Apple Inc., registered in the United States and
other countries. Thunderbolt and the Thunderbolt logo are trademarks of Intel Corporation in the U.S. and/or other countries.
Other product names are trademarks of their respective owners. Product specifications subject to change without notice.
Support Notes: When handling computer products, you
must take care to prevent components from being damaged
by static electricity. Before opening your computer or removing
parts from their packages, always ground yourself first by touching
a metal part of the computer, such as a port access cover, and work
in an area free of static electricity; avoid carpeted areas. Handle all
electronic components by their edges, and avoid touching connector
traces and component pins.
Support Note: This document was up to date at the time
of printing. However, changes to the hardware or software
may have occurred since then. Please check the Sonnet website for
the latest documentation.
1. Go to
2. Click the Computer Cards link.
3. Click the PCIe Cards link.
4. Click the Solo10G SFP+ PCIe Card link, and then click the
Documentation link.
5. Click the Solo10G SFP+ PCIe Card Quick Start Guide [English] link,
and then check the Document Version information. If the version
listed is later than this document (revision E), click the Download
Now button for the latest version.
Sonnet G10E-SFP-1X-E3

Brauchen Sie Hilfe?

Anzahl der Fragen: 0

Haben Sie eine Frage zum Sonnet G10E-SFP-1X-E3 oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je detaillierter Sie Ihr Problem und Ihre Frage angeben, desto einfacher können andere Sonnet G10E-SFP-1X-E3-Eigentümer Ihre Frage richtig beantworten.

Sehen Sie sich hier kostenlos das Handbuch für Sonnet G10E-SFP-1X-E3 an. Dieses Handbuch fällt unter die Kategorie Netzwerkkarten / Adapter und wurde von 1 Personen mit einem Durchschnitt von 7.5 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum Sonnet G10E-SFP-1X-E3 oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage

Sonnet G10E-SFP-1X-E3-Spezifikationen

Marke Sonnet
Model G10E-SFP-1X-E3
Produkte Netzwerkkarte / Adapter
Sprache Englisch
Dateityp PDF
Anschlüsse und Schnittstellen
Übertragungstechnik Verkabelt
Hostschnittstelle PCI Express
Schnittstelle Faser
Anzahl Faseranschlüsse 1
Optischer Kabelverbinder SFP+
Maximale Datenübertragungsrate 10000 Mbit/s
Netzstandard -
Ethernet LAN Datentransferraten 1000,2500,5000,10000 Mbit/s
Ethernet Schnittstellen Typ 10 Gigabit Ethernet,Gigabit Ethernet
Eingebauter Ethernet-Anschluss Ja
Verkabelungstechnologie 10/100BaseT(X)
Unterstützt Windows-Betriebssysteme Ja
Unterstützt Mac-Betriebssysteme Ja
Unterstützte Linux-Betriebssysteme Ja
Eingebaut Ja
Komponente für PC
Mehr anzeigen

Häufig gestellte Fragen

Nachfolgend finden Sie die am häufigsten gestellten Fragen zu Sonnet G10E-SFP-1X-E3 .

Ist Ihre Frage nicht aufgeführt? Stellen Sie hier Ihre Frage