SoundBot SB270

SoundBot SB270 Bedienungsanleitung

(1)
  • 1
    2
    3Charge headset for at least 3 hours.
    (via MicroUSB)
    - Red LED will light up when charging.
    - Red LED will be o once fully charged.
    - Be sure headset is powered o before
    going to next step.
    Pairing your SB270 via Bluetooth.
    - Press and hold the multifunction key for 7
    seconds until blue and red lights ash.
    - Enable the Bluetooth function on the mobile
    phone or computer or other pairing device.
    - Search for Bluetooth devices from your
    pairing device (phone, tablet or PC).
    - Select “SB270” and connect. A beep will
    conrm successful pairing.
    Power on: 3 rapid blinks of blue light
    Power o: 3 rapid blinks of red light blinks
    Standby: blue light blinks once every 5 seconds
    Incoming call: quick continuous blinks of blue light
    In use: blue light blinks once every 5 seconds
    Charging mode: red light stays on or blinks
    Fully charged: red light will be turned o
    Low battery alarm: red light blinks once every 30 seconds
    LED Indicators
    SENSORY TOUCH CONTROL
    Voice Dialing
    - Double click the multifunction button
    (Note: Your phone must support this function)
    Touch Controls (one notch per swipe)
    - Pause/Play music: Touch the middle of headphone
    and press lightly to play or pause the music.
    - Increase/decrease volume: Use one nger to slide
    from the top to the bottom to decrease the volume
    and vice versa to increase volume.
    volume+/next track
    volume-/previous track
    microphone
    3.5mm audio port
    LED
    micro usb port
    multifunction button
    Basic Operation
    Powering on: Press and hold multifunction button for 3 seconds. Blue light
    blinks 3 times and headphone beeps to indicate that power is on.
    Answering a call: Short press multifunction button to take the call.
    Ending a call: Short press multifunction button until headphone beeps.
    Rejecting a call: Press and hold the multifunction button for two seconds
    until headphone beeps.
    Switching conversation from headphone to mobile phone: Press
    multifunction button for 2 seconds, voice will be switched from headphone
    to mobile phone and vice versa.
    Redialing last dialed number: In stanby mode, press volume(+) button for 3
    seconds until the beeping notification takes place.
    Microphone mute: Press and hold volume(-) button for 2 seconds until the
    headphone beeps. Press and hold volume(-) button for 2 seconds to
    unmute.
    Volume adjustment: short press volume(+) button to increase volume,
    short press volume(-) button to decrease volume.
    Play/Pause: Short press multifunction button can to play/pause music.
    Forward/backward: Long press volume(-) button to play the last song, long
    press volume(+) button to play next song.
    Pairing mode: Deactivates automatically within 3 minutes when no device
    is connected.
    Auto power-off: SB270 will shut off automatically after 10 minutes of idle
    activity.
    Manual power-off: Press multifunction button for 6 seconds until red light
    blinks 3 times and headphone beeps.
    - Backward/forward: Use two ngers (the ngers
    need to be spread out) to slide from the top to the
    bottom to play the next song and vice versa for
    previous track.
    Features
    Music play time: 14 hours
    Talk time: 12 hours
    Range: up 10 meters or 33 feet
    Bluetooth standard: Bluetooth 3.0 +
    EDR version with AVRCP and A2DP
    Speaker: 40mm driver speaker x 2
    Minimum voltage: 5V 200mAh
    S undBot®
    SB270
    Quick Start Guide
    &
    User Manual
    www.soundbot.com
    experience audio excellence.
    live the state of art technology.
    feel the difference.
    General Use and Notices
    Please read the following information before using this product.
    Users are not permitted to make changes or modify the product and the accessories in any way.
    1. DO NOT use the product while operating a motor vehicle.
    2. To avoid electronic interference and/or compatible conflicts, TURN OFF the product in any
    facilities where posted notices instruct you to do so. For example: Aircraft, Military Base, Hospital
    or Health Care Facilities.
    3. To avoid impairing your hearing in the long-term operation, keep the headset volume in the
    moderate level.
    4. Keep away of fire, water, and high voltage equipment.
    5. Follow the charging procedure described in this guide to charge the product.
    Charging the Battery
    SB270 uses a rechargeable battery. A normal charging process takes about 3 hours. The red LED
    will turn on when charging and will turn off when charging is finished.
    When the battery is nearly used up, the red LED will flash every 30 seconds and there will also be
    a prompt from the headset. Please charge the headset at this time.
    Please make sure the battery has been fully charged your first three uses to ensure the battery’s
    best performance.
    Always use proper AC Power Adapter (not included) to charge the headset. Using any incorrect
    power supply device will cause damage and void the warranty.
    Upon completion of charging, please pull out the cable from the headset t. Do not put the headset
    in charging state past it being fully charged. This will shorten the lifetime of the battery.
    Do not use the headset in extreme hot or cold environment. It is recommended to keep the
    environment temperature between 15 and 25 degrees Celsius.
    Do not install, place or use the headset near any source of heat such as a stove, radiator, oven,
    toaster, coffee maker or other apparatus (including microwave oven) that gives off heat.
    SoundBot® is a registered trademark of SoundBot.
    Warranty and product info: http://www.soundbot.com
    All trade names are registered trademarks of respective manufacturers listed.
    Bluetooth technology and trademark are registered property of Bluetooth SIG.
    All rights reserved.
SoundBot SB270

Brauchen Sie Hilfe?

Anzahl der Fragen: 0

Haben Sie eine Frage zum SoundBot SB270 oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je detaillierter Sie Ihr Problem und Ihre Frage angeben, desto einfacher können andere SoundBot SB270-Eigentümer Ihre Frage richtig beantworten.

Sehen Sie sich hier kostenlos das Handbuch für SoundBot SB270 an. Dieses Handbuch fällt unter die Kategorie Headsets und wurde von 1 Personen mit einem Durchschnitt von 9.6 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Engels. Haben Sie eine Frage zum SoundBot SB270 oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage

SoundBot SB270-Spezifikationen

Allgemeines
Marke SoundBot
Model SB270
Produkte Headset
Sprache Engels
Dateityp PDF

Häufig gestellte Fragen

Nachfolgend finden Sie die am häufigsten gestellten Fragen zu SoundBot SB270 .

Ist Ihre Frage nicht aufgeführt? Stellen Sie hier Ihre Frage