Push this button to start the selected program: the
indicator lights up and goes off at the end of the
program. When the door is opened during a
washing cycle, the cycle is temporarely paused: the
Start indicator blinking. To restart the cycle close
the door and push Start button again.
CANCEL/OFF BUTTON
Push this button to switch off the control panel.
If pressed when a program is running it cancels the
program ongoing draining water for 1 minute.
If pressed when the dishwasher is switched off it
drains any possible liquids from dishwasher (1
minute process).
If the indicator flashes repeatedly, see page 6 -
chapter ”What to do if ...”.
(see at right for options description)
1)Program data obtained in conformity with European standard EN 50242, obtained under normal conditions
(without additional options) and may vary depending on conditions. Differences of up to 20 minutes are possible
with sensor programs as a result of the appliance’s automatic calibration system.
2)Reference program for energy label in compliance with EN 50242 regulations. - Note for Testing Institutes: for
detailed information on the EN/Standard loading comparison test and other tests, contact the following address:
“nk_customer@whirlpool.com”.
Table of programs
Deter-
gent
Consumption
P
Programs
Available
options
Loading instructions
LitreskWh
Minutes
1)
1
Pre-Wash cold
DelayCrockery to be washed later.—5.00.0210
2
Glasses 40°C
Delay
Light soiling, for example glasses
and cups.
X13.00.9097
3
Quickwash40°C
Delay
Lightly soiled crockery, with no
dried-on food.
X13.00.7030
4
Eco
2)
50°C
Delay
Half load
Normally soiled crockery.X15.01.05150
5
Intensive70°C
Delay
Recommended program for
heavily soiled crockery, especially
suitable for pans and saucepans.
X15.01.50140
5019 396 01838/B
BEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULLY READ
THIS QUICK REFERENCE GUIDE AND THE ASSEMBLY INSTRUCTIONS!
THE CONTROL PANEL OF THIS DISHWASHER ACTIVATES PUSHING
ANY BUTTON EXCEPT CANCEL/OFF BUTTON.
FOR ENERGY SAVING THE CONTROL PANEL DEACTIVATES
AUTOMATICALLY AFTER 30 SECONDS IF ANY CYCLE IS STARTED.
SALT INDICATOR
When lit (at the end of the
cycle), the salt reservoir
needs to be refilled.
HALF LOAD BUTTON
Half load cycle can be used
for the upper or lower rack.
Select the required program
then press the “Half Load”
button - the light comes on.
Turns off at the end of the
program. The “Half Load”
option can be used with the
programs indicated in the
table of programs.
TABLET SETTING
This setting allows to optimize the cycle performances
according the type of detergent used.
Push the Tablet button for 3 seconds (until the indicator
lights up) if you are using the combined detergents in
tablet (rinse aid, salt and deteregent in 1 dose).
If you are using powder detergent or liquid detergent,
the Tablet indicator on the control panel has to be off.
DELAYED START
BUTTON
The wash cycle can be
programmed to start
after 2, 4 or 8 hours.
Then press the Start
button. The wash
program will start after
the set time.
RINSE AID INDICATOR
When lit (at the end of the
cycle), the rinse aid
dispenser needs to be
refilled.
ADP 5600
Options and display description
Quick reference guide
Sehen Sie sich hier kostenlos das Handbuch für Whirlpool ADP 5600 IX an. Dieses Handbuch fällt unter die Kategorie spülmaschinen und wurde von 4 Personen mit einem Durchschnitt von 8.5 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum Whirlpool ADP 5600 IX oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage
Brauchen Sie Hilfe?
Haben Sie eine Frage zum Whirlpool und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Whirlpool -Besitzer, Ihnen eine gute Antwort zu geben.
Finden Sie die Antwort auf Ihre Frage nicht im Handbuch? Vielleicht finden Sie die Antwort auf Ihre Frage in den FAQs zu Whirlpool ADP 5600 IX unten.
Was kann ich gegen eine stinkende Spülmaschine tun?
Bei stinkenden Spülmaschinen können Sie folgende Schritte ausführen: - Filter reinigen - Sprüharme reinigen - Türdichtungen reinigen - Heißes Spülprogramm durchführen - Leere Maschine mit Spülmaschinenreiniger reinigen
Muss das Geschirr zuvor abgespült werden?
Es ist nicht ratsam, schmutziges Geschirr abzuspülen, bevor Sie es in die Spülmaschine stellen. Für die Lebensdauer der Maschine ist es besser, alles schmutzig in die Spülmaschine zu stellen. Das Fett auf dem schmutzigen Geschirr ist die Schmierung für die Pumpe in der Maschine.
Wie viel Geschirrspülmittel muss ich verwenden?
Die durchschnittlich verwendete Menge beträgt ca. 25 g Geschirrspülmittel. Es ist ratsam, die Hinweise auf der Verpackung zu befolgen.
Wie kann ich das Spülmaschinensalz bei meiner Spülmaschine nachfüllen?
Jede Spülmaschine verfügt über ein separates Fach für Spülmaschinensalz. Drehen Sie den Knopf des Fachs, um es zu öffnen. Das Spülmaschinensalz kann dann mit einem Trichter in das Fach gekippt werden.
Wie hoch ist das Whirlpool ADP 5600 IX?
Das Whirlpool ADP 5600 IX hat eine Höhe von 850 mm.
Wie breit ist das Whirlpool ADP 5600 IX?
Das Whirlpool ADP 5600 IX hat eine Breite von 597 mm.
Wie tief ist das Whirlpool ADP 5600 IX?
Das Whirlpool ADP 5600 IX hat eine Tiefe von 596 mm.
Ist das Handbuch der Whirlpool ADP 5600 IX unter Deutsch verfügbar?
Leider haben wir kein Handbuch für Whirlpool ADP 5600 IX in Deutsch verfügbar. Dieses Handbuch ist erhältlich in Englisch.
Brauchen Sie Hilfe?
Haben Sie eine Frage zum Whirlpool und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere Whirlpool -Besitzer, Ihnen eine gute Antwort zu geben.
Anzahl der Fragen: 0