MONO AUDIO INPUTS - Channels 1-6 each feature two mono
inputs that can selected or summed via the 3-way toggle switch
(A/B) in the channel strip section.
STEREO AUDIO INPUTS - Channels 7 & 8 are both
true Stereo channels with two inputs each. Each
input is routed to the left and right master outputs.
Channels can be mono if only the left input is used.
AUX I/O SECTION -
AUX RETURN - Two mono, unity
gain inputs for returning signals
from the Auxiliary outputs or any
mono audio source. Sums to the
main mix at unity, mono to stereo.
AUX OUTS - Mono output for rout-
ing signals to external gear via the
AUX control for each channel.
AUX CV INPUTS - Control the mas-
ter level of the AUX outputs with
CV.
MIX IN - Stereo
unity gain inputs
for adding a sub-
mix from another
mixer or external
audio source.
SEND OUTPUTS - Stereo send for routing to external audio processors
such as a bus compressor.
RETURN INPUTS - Stereo unity gain inputs for returning audio signals from
external audio processors or any stereo external audio source. Plugging in
here will cut the main signal going to the outputs.
AUX SWITCH - Selects
which AUX to send to.
Middle position is off.
AUX KNOB - Attenuates
the amount of each
channel’s signal being
sent to the AUX out.
PAN KNOB - Left
or Right? The
decision is yours.
Pan position is
visually indicated
by PAN LEDs.
This feature will make rival DJs
shit their pants
This feature will make rival DJs
shit their pants
PRE I POST I X SWITCH - Select whether you’d like the chan-
nel to be sent to the aux before or after the position of the
fader. PRE disregards fader level meaning the signal is sent
to the aux attenuator at unity even if the fade is all the way
down. When switch is set to POST, the signal sent to the aux
is dependent of the fader’s position. The middle turns off the
AUX send for that channel. Why two ways to mute the AUX
for each channel? Set and forget one, perform with the other!
FADER - Level con-
trol from -infinity
(symbol) to +5dB.
Below -30dB, the
signal is cut com-
pletely to eliminate
bleed from the
signal path.
DBU METER - Level of the internal
Mix bus. This is not affected by the
MASTER knob.
GAIN KNOB - Attenuate or boost
the incoming signal up to 12 dB.
A I AB I B SWITCH - Use this switch
to select which input you will hear
on that channel. AB Sums the two
inputs together at unity gain.
Sehen Sie sich hier kostenlos das Handbuch für WMD Performance Mixer an. Dieses Handbuch fällt unter die Kategorie Nicht kategorisiert und wurde von 1 Personen mit einem Durchschnitt von 8.2 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum WMD Performance Mixer oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage
Brauchen Sie Hilfe?
Haben Sie eine Frage zum WMD und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere WMD -Besitzer, Ihnen eine gute Antwort zu geben.
Brauchen Sie Hilfe?
Haben Sie eine Frage zum WMD und die Antwort steht nicht im Handbuch? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je besser Ihr Problem und Ihre Frage beschrieben sind, desto einfacher ist es für andere WMD -Besitzer, Ihnen eine gute Antwort zu geben.
Anzahl der Fragen: 0