Yamaha PX5

Yamaha PX5 Bedienungsanleitung

(1)
  • 1
    Thank you for your purchase of the Yamaha PX10, PX8, PX5 or PX3 power amplifier. Please read through
    this manual carefully before using for the first time, in order to take full advantage of your PX power ampli-
    fier’s superlative features and enjoy trouble-free operation for years to come.
    After you have read the manual, keep it in a safe, convenient place for reference when needed.
    Please read the PRECAUTIONS on the reverse side of this manual before use.
    The illustrations as shown in this manual are for instructional purposes only.
    The company names and product names used in this manual are the trademarks or registered trademarks
    of their respective companies.
    In this manual, the PX10, PX8, PX5 and PX3 power amplifier models are referred to collectively as “PX
    amplifier.
    Unless specified otherwise, the example illustrations used in this manual are taken from the PX10.
    The PX amplifier provides two setting methods: Basic mode and Advanced mode. This manual explains
    operations in the Basic mode. Operate in the Advanced mode for detailed settings. For information on the
    Advanced mode, refer to the PX10/PX8/ PX5/PX3 Reference Manual.
    Features
    Maximum output of 1,000W out of lightweight chassis (PX10)
    Yamaha’s proprietary Class-D and processing technologies provide superb sound quality and high reliability
    Speaker presets that allow you to get the best possible performance from Yamaha speakers
    A wide variety of DSP functions, including D-CONTOUR processing
    CONFIG WIZARD that provides the optimal configuration for any speaker
    Broad range of input/output connectors
    Included accessories
    •AC power cord
    Owner’s Manual (this leaflet)
    Technical Specifications (English)
    AC plug clamp
    •USB cap
    The PX amplifier can be used as a normal amplifier by simply setting the volume knobs properly. The fol-
    lowing settings enhance the performance of speakers.
    The PX10/PX8/ PX5/PX3 Reference Manual is an electronic file in PDF format. You can read this book
    on a computer. Use Adobe
    ®
    Reader
    ®
    to read this book on screen, search for words very quickly, print
    specific pages, or click links to display sections of special interest. The ability to search for words, or to
    follow links directly to relevant sections in the document, are helpful attributes of this electronic file for-
    mat. We encourage you to take advantage of these benefits. You can download the latest Adobe Reader
    application from the website listed below.
    http://www.adobe.com/
    In this manual, methods of operations are explained with the following marks.
    [(item name)]: Rotate the main knob to select [(item name)].
    : Press the Main knob.
    : Press the [MENU] key.
    : Press the [ ] (back) key.
    : Operate A, and then operate B.
    A solid arrow ( ) between steps indicates a basic operation procedure, and a dotted arrow ( ) indi-
    cates an operation returning to the previous screen.
    EN
    ZQ41390
    Owners Manual
    CAUTION
    Please keep the USB cap out of reach of children,
    to keep them from accidentally swallowing it.
    Setup
    Pre-installation
    Mount PX amplifiers in a rack as required.
    Make sure that the power is turned off, and
    turn both the two volume knobs all the way
    to the left.
    CAUTION
    Please carry out “Pre-installation” surely. Do not connect any cables while the power is on.
    Stereo connection (using two full-range speakers)
    Mixer
    Full-range speaker
    for R channel
    Full-range speaker
    for L channel
    R channel
    L channel
    1. Connect the full-range speaker for L channel to the
    [SPEAKERS] A terminal and the full-range speaker for
    R channel to the [SPEAKERS] B terminal.
    2. Connect the output from sources (such as a mixer) to
    the [INPUT] A/B connectors. Connect the L channel
    source to the [INPUT] A connector, and the R channel
    source to the [INPUT] B connector.
    3. Connect the AC power cord and turn on. First connect the
    AC power cord to the connector on the unit, and then plug
    it into an appropriate AC power outlet.
    4. Secure the AC power cord with the AC plug clamp to pre-
    vent accidental disconnection from the connector. Refer to
    the “Rear panel” section on the reverse side for instructions on installation.
    NOTE
    Refer to the “Wiring” section on the reverse
    side for instructions on making connections.
    AC IN connector
    AC power cord
    To outlet
    HOME screen
    MENU screen (top screen)
    SP TYPE screen
    Speaker selection
    Select a speaker to be connected from the shown list.
    If the speaker is not in the list, select “GENERIC.
    HPF screen
    Select a cutoff frequency of the high pass filter. If
    the high pass filter is not used, select “OFF.
    CONFIRMATION screen
    [CONFIG WIZARD]
    [FULL+FULL]
    [(Speaker name)]
    [(Cutoff frequency)]
    [APPLY]
    (Applies the set value)
    Go on to the “Tone control” instructions.
    CAUTION
    Please carry out “Pre-installation” surely. Do not connect any cables while the power is on.
    Cross-over connection (using a full-range speaker and a subwoofer)
    Mixer
    Full-range
    speaker
    Subwoofer
    1. Connect the subwoofer to the [SPEAKERS] A terminal
    and the full-range speaker to the [SPEAKERS] B ter-
    minal.
    2. Connect the output from source (such as mixer) to the
    [INPUT] A connector.
    3. Connect the AC power cord and turn on. First connect
    the AC power cord to the connector on the unit, and then
    plug it into an appropriate AC power outlet.
    4. Secure the AC power cord with the AC plug clamp to pre-
    vent accidental disconnection from the connector. Refer to
    “Rear panel” section on the reverse side for instructions on the installation.
    NOTE
    Refer to “Wiring” section on the reverse side
    for instructions on making connections.
    AC IN connector
    AC power cord
    To outlet
    HOME screen
    MENU screen (top screen)
    [CONFIG WIZARD]
    SP TYPE screen
    [FULL+SUB]
    Speaker selection (A)
    Select a subwoofer to be connected from the shown
    list. If the subwoofer is not in the list, select
    “GENERIC.”
    [(Speaker name)]
    HPF screen
    Select a cutoff frequency of the high pass filter of
    the subwoofer. If the high pass filter is not used,
    select “OFF.”
    [(Cutoff frequency)]
    Speaker selection (B)
    Select a full-range speaker to be connected from the
    shown list. If the speaker is not in the list, select
    “GENERIC.”
    [(Speaker name)]
    X-OVER screen
    Select a crossover frequency.
    [(Crossover frequency)]
    CONFIRMATION screen
    [APPLY]
    (Applies the set value)
    Go on to the “Tone control” instructions.
    NOTE
    To mute channel A, push the [A] key and the main knob simulta-
    neously. To cancel muting, push the [A] key and the main knob
    simultaneously again.
    To mute channel B, push the [B] key and the main knob simulta-
    neously. To cancel muting, push the [B] key and the main knob
    simultaneously again.
    Tone Control
    Input signal from the source, confirm that the sound is
    being output from the speakers, and adjust the volume
    appropriately.
    MENU screen (top screen)
    [TUNING]
    TUNING screen
    [D-CONTOUR]
    D-CONTOUR screen
    [MODE]
    MODE Selection screen
    Select one of the following three modes.
    OFF: Turns off D-CONTOUR.
    FOH/MAIN: Boosts the high and low frequency compo-
    nents so that the frequency response is suitable for main
    speaker use.
    MONITOR: Reduces the low frequency range, which could
    otherwise tend to be boomy if the speaker is set directly on
    the floor. This enables you to hear mid and high frequency
    ranges clearly when using as a floor monitor.
    [(MODE)]
    D-CONTOUR screen
    [DEPTH]
    DEPTH Selection screen
    Set over a range from 1 to 10.
    The larger the value, the deeper the effect.
    MENU screen (top screen)
    HOME screen
Yamaha PX5

Brauchen Sie Hilfe?

Anzahl der Fragen: 0

Haben Sie eine Frage zum Yamaha PX5 oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage. Geben Sie eine klare und umfassende Beschreibung des Problems und Ihrer Frage an. Je detaillierter Sie Ihr Problem und Ihre Frage angeben, desto einfacher können andere Yamaha PX5-Eigentümer Ihre Frage richtig beantworten.

Sehen Sie sich hier kostenlos das Handbuch für Yamaha PX5 an. Dieses Handbuch fällt unter die Kategorie Empfänger und wurde von 1 Personen mit einem Durchschnitt von 7.5 bewertet. Dieses Handbuch ist in den folgenden Sprachen verfügbar: Englisch. Haben Sie eine Frage zum Yamaha PX5 oder benötigen Sie Hilfe? Stellen Sie hier Ihre Frage

Yamaha PX5-Spezifikationen

Marke Yamaha
Model PX5
Produkte Empfänger
Sprache Englisch
Dateityp PDF

Verwandte Produkthandbücher

Empfänger Yamaha

Häufig gestellte Fragen

Nachfolgend finden Sie die am häufigsten gestellten Fragen zu YamahaPX5 .

Ist Ihre Frage nicht aufgeführt? Stellen Sie hier Ihre Frage

Diese Website benutzen Cookies. Wenn Sie die Website weiter nutzen, stimmen Sie der Verwendung von Cookies zu.

Erfahren Sie mehr